D4K2
OVERVIEW
BENEFITS
-
Up to 20% Fuel Savings
- With enhanced load sensing ECO Mode
- With enhanced load sensing ECO Mode
-
Up to 6% Increased Machine Productivity
- With Optional Power Pitch
-
3 Blade Control Features
- Slope Indicate, Slope Assist and Stable Blade offers simple and intuitive control of the blade
FEATURES AT A GLANCE
Grade With Ease and Accuracy
Improvements were made in various areas of blade control, using new technology features. Options such as Slope Indicate, Slope Assist and Stable Blade, offers the operator simple, intuitive control of the blade especially during finish grading and contributes to increased productivity and less operator fatigue.
Choices for any Application
The family of Small Dozers offers a choice of both track frames and undercarriages.
Track frames are available in two configurations:
XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required
Undercarriages are available in two configurations:
• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn
• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components
All Day Comfort
The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
Quiet environment
Wide door openings for easy entry/exit
Dash mounted air vents for improved air circulation
Air suspension seat for a more comfortable ride
Air conditioning for greater comfort in all climates
New ventilated seat (optional)
Heated seat and heated control handles (optional)
Easy Serviceability Access
Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
Easy ground level access to hydraulic filters located in the left rear service compartment
SPECIFICATIONS
- Engine Model Cat C4.4
- Power - Net 62.6kW
- Displacement 4.4l
- Bore 105mm
- Stroke 127mm
- Note Engine equivalent to Tier 3 emissions levels.
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 62.6kW
- Net Power - 2,200 rpm - SAE J1349 62.6kW
- Drive Pumps 1
- Relief Valve Settings 48500kPa
- Maximum Travel Speed - Reverse 10km/h
- Maximum Travel Speed - Forward 9km/h
- Track Motors 2
- Operating Weight - XL 8072kg
- Operating Weight - LGP 8380kg
- Final Drive - Each - XL 10l
- Fuel Tank 195l
- Crankcase - With Filter 11l
- Final Drive - Each - LGP 10l
- Transmission - Hydraulic Tank 59.5l
- Cooling System 22.4l
- Pump Output 68l/min
- Relief Valve Settings 20600kPa
- Length - Track on Ground - XL 2248mm
- Ground Pressure - XL 38.6kPa
- Ground Contact Area - LGP 28550cm²
- Track Gauge - LGP 1725mm
- Shoe Width - LGP 635mm
- Ground Pressure - LGP 29.2kPa
- Track Gauge - XL 1550mm
- Ground Contact Area - XL 20682cm²
- Shoe Width - XL 460mm
- Length - Track on Ground - LGP 2248mm
- Type Parallelogram
- Number of Shanks 3
- Height 165mm
- Weight 554kg
- Maximum Ground Clearance Under Tip 448mm
- Maximum Reach - Ground Line 596mm
- Overall Width 1710mm
- Maximum Digging Depth 337.5mm
- Weight 610kg
- Winch Drive Hydrostatic
- Control Hydraulic
- Speed Variable
- Rope Diameter - Optional 19mm
- Drum Capacity - Recommended Cable 113m
- Drum Width 274mm
- Drum Capacity - Optional Cable 78m
- Winch Length 705mm
- Maximum Line Pull - Full Drum 11340kg
- Throat Clearance 171.5mm
- Maximum Line Pull - Bare Drum 18144kg
- Rope Diameter - Recommended 16mm
- Maximum Line Speed - Bare Drum 40m/min
- Overall Width 741mm
- Maximum Line Speed - Full Drum 63m/min
- Drum Diameter 254mm
- Sound Levels - ISO 6396:2008 79dB(A)
- BLADE: Blade Lift Height - Intermediate 743mm
- Overall Length - With Blade - XL 4274mm
- Tractor Height - LGP 2763mm
- ROPS ISO 3471:2008
- BLADE: Blade Width - XL 2782mm
- BLADE: Blade Height - Intermediate 860mm
- BLADE: Blade Height - XL 1010mm
- BLADE: Blade Capacity (SAE) - XL 1.98m³
- BLADE: Blade Lift Height - XL 743mm
- Track Gauge - LGP 1725mm
- Length - Basic Tractor - Without Blade - LGP 3275mm
- Track Gauge - XL 1550mm
- Width - Tractor - Standard Shoes - No Blade - XL 2010mm
- BLADE: Blade Width at Maximum Angle - LGP 2874mm
- Length - Basic Tractor - Without Blade - XL 3275mm
- BLADE: Digging Depth - XL 573mm
- BLADE: Blade Capacity (SAE) - LGP 1.85m³
- BLADE: Blade Capacity (SAE) - Intermediate 1.5m³
- BLADE: Blade Height - LGP 910mm
- BLADE: Blade Width at Maximum Angle - Intermediate 2669mm
- BLADE: Maximum Tilt - XL 387mm
- Overall Length - With Blade - LGP 4274mm
- BLADE: Digging Depth - LGP 590mm
- Ground Clearance - LGP 332mm
- Note Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
- BLADE: Digging Depth - Intermediate 590mm
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
- Width - Tractor - Standard Shoes - No Blade - LGP 2360mm
- Number of Rollers - Each Side 7
- BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
- BLADE: Maximum Tilt - Intermediate 448mm
- BLADE: Maximum Tilt - LGP 438mm
- BLADE: Blade Width - Intermediate 2921mm
- Number of Shoes - Each Side - SystemOne Undercarriage 38
- BLADE: Maximum Angle (either side) - Intermediate 25°
- Ground Clearance - XL 332mm
- BLADE: Blade Width - LGP 3149mm
- FOPS ISO 3449:2005 Level II
- Tractor Height - XL 2763mm
- BLADE: Maximum Angle (either side) - LGP 25°
- BLADE: Blade Lift Height - LGP 708mm
- BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
- Sound Levels - SAE J1166 FEB2008 79dB(A)
- BLADE: Blade Width at Maximum Angle - XL 2542mm
- BLADE: Maximum Angle (either side) - XL 25°
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
D3K2 Shiphold / Port Handling
Dozers
- Engine ModelCat C4.4
- Power - Net55.2kW
- Maximum Travel Speed - Reverse10km/h
D8R
Dozers
- Engine ModelCat 3406C DITA
- Power - Net226kW
- Net Power (Rated) - 2,100 rpm - ISO 9249/SAE J1349226kW
D11
Dozers
- Engine ModelCat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward634kW
- Displacement32.1l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
