D5K2
OVERVIEW
BENEFITS
-
Up to 20% Fuel Savings
- With enhanced load sensing ECO Mode
- With enhanced load sensing ECO Mode
-
Up to 6% Increased Machine Productivity
- With Optional Power Pitch
-
3 Blade Control Features
- Slope Indicate, Slope Assist and Stable Blade offers simple and intuitive control of the blade
FEATURES AT A GLANCE
Grade With Ease and Accuracy
Improvements were made in various areas of blade control, using new technology features. Options such as Slope Indicate, Slope Assist and Stable Blade, offers the operator simple, intuitive control of the blade especially during finish grading and contributes to increased productivity and less operator fatigue.
Choices for any Application
The family of Small Dozers offers a choice of both track frames and undercarriages.
Track frames are available in two configurations:
XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required
Undercarriages are available in two configurations:
• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn
• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components
All Day Comfort
The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
Quiet environment
Wide door openings for easy entry/exit
Dash mounted air vents for improved air circulation
Air suspension seat for a more comfortable ride
Air conditioning for greater comfort in all climates
New ventilated seat (optional)
Heated seat and heated control handles (optional)
Easy Serviceability Access
Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
Easy ground level access to hydraulic filters located in the left rear service compartment
SPECIFICATIONS
- Engine Model Cat C4.4
- Power - Net 71.6kW
- Displacement 4.4l
- Bore 105mm
- Stroke 127mm
- Note Engine equivalent to Tier 3 emissions levels.
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 71.6kW
- Net Power - 2,200 rpm - SAE J1349 71.6kW
- Drive Pumps 1
- Track Motors 2
- Relief Valve Settings 48500kPa
- Maximum Travel Speed - Reverse 10km/h
- Maximum Travel Speed - Forward 9km/h
- Operating Weight - XL 9110kg
- Operating Weight - LGP 9418kg
- Final Drive - Each - XL 10l
- Fuel Tank 195l
- Crankcase - With Filter 11l
- Transmission - Hydraulic Tank 59.5l
- Cooling System 22.4l
- Final Drive - Each - LGP 10l
- Pump Output 68l/min
- Relief Valve Settings 20600kPa
- Track Gauge - XL 1600mm
- Shoe Width - LGP 660mm
- Length - Track on Ground - LGP 2310mm
- Shoe Width - XL 510mm
- Ground Contact Area - XL 23562cm²
- Length - Track on Ground - XL 2310mm
- Track Gauge - LGP 1750mm
- Ground Pressure - XL 38.6kPa
- Ground Pressure - LGP 31.1kPa
- Ground Contact Area - LGP 30492cm²
- Type Parallelogram
- Number of Shanks 3
- Height 165mm
- Weight 554kg
- Maximum Ground Clearance Under Tip 448mm
- Maximum Reach - Ground Line 555mm
- Overall Width 1710mm
- Maximum Digging Depth 337.5mm
- Weight 610kg
- Winch Drive Hydrostatic
- Control Hydraulic
- Speed Variable
- Drum Diameter 254mm
- Rope Diameter - Optional 19mm
- Maximum Line Speed - Full Drum 63m/min
- Maximum Line Pull - Full Drum 11340kg
- Winch Length 705mm
- Rope Diameter - Recommended 16mm
- Maximum Line Pull - Bare Drum 18144kg
- Overall Width 741mm
- Drum Width 274mm
- Maximum Line Speed - Bare Drum 40m/min
- Drum Capacity - Recommended Cable 113m
- Drum Capacity - Optional Cable 78m
- Throat Clearance 171.5mm
- BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
- Tractor Height - LGP 2769mm
- BLADE: Blade Height - LGP 1010mm
- Tractor Height - XL 2769mm
- Number of Rollers - Each Side 7
- BLADE: Maximum Tilt - LGP 448mm
- Length - Basic Tractor - Without Blade - LGP 3265mm
- BLADE: Blade Lift Height - LGP 767mm
- BLADE: Blade Capacity (SAE) - XL 2.19m³
- Track Gauge - XL 1600mm
- BLADE: Maximum Angle (either side) - Intermediate 25°
- BLADE: Blade Height - Intermediate 1010mm
- BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
- BLADE: Digging Depth - XL 586mm
- Length - Basic Tractor - Without Blade - XL 3265mm
- BLADE: Blade Capacity (SAE) - LGP 2.34m³
- BLADE: Blade Width at Maximum Angle - XL 2636mm
- BLADE: Blade Width - Intermediate 2921mm
- Sound Levels - ISO 6396:2008 79dB(A)
- BLADE: Blade Width at Maximum Angle - Intermediate 2669mm
- Width - Tractor - Standard Shoes - No Blade - LGP 2410mm
- Overall Length - With Blade - XL 4309mm
- BLADE: Digging Depth - Intermediate 572mm
- Note Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
- BLADE: Blade Width at Maximum Angle - LGP 2940mm
- BLADE: Maximum Tilt - XL 402mm
- BLADE: Maximum Tilt - Intermediate 448mm
- BLADE: Blade Height - XL 1073mm
- Overall Length - With Blade - LGP 4309mm
- Width - Tractor - Standard Shoes - No Blade - XL 2110mm
- BLADE: Maximum Angle (either side) - XL 25°
- Ground Clearance - XL 332mm
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
- ROPS ISO 3471:2008
- Ground Clearance - LGP 332mm
- BLADE: Digging Depth - LGP 572mm
- BLADE: Blade Lift Height - XL 767mm
- FOPS ISO 3449:2005 Level II
- Number of Shoes - Each Side - SystemOne Undercarriage 36
- BLADE: Blade Capacity (SAE) - Intermediate 2.09m³
- BLADE: Blade Lift Height - Intermediate 767mm
- BLADE: Blade Width - XL 2782mm
- BLADE: Blade Width - LGP 3220mm
- BLADE: Maximum Angle (either side) - LGP 25°
- Sound Levels - SAE J1166 FEB2008 79dB(A)
- Track Gauge - LGP 1750mm
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
D3K2 Shiphold / Port Handling
Dozers
- Engine ModelCat C4.4
- Power - Net55.2kW
- Maximum Travel Speed - Reverse10km/h
D8R
Dozers
- Engine ModelCat 3406C DITA
- Power - Net226kW
- Net Power (Rated) - 2,100 rpm - ISO 9249/SAE J1349226kW
D11
Dozers
- Engine ModelCat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward634kW
- Displacement32.1l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
