SPECIFICATIONS
- Compression Ratio 16.5:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 115 mm (4.53 in)
- Displacement 9.3 L (567.5 in³)
- Stroke 149 mm (5.87 in)
- Length 1125 mm (44.3 in)
- Width 791 mm (31.1 in)
- Height 1068 mm (42 in)
- Emissions China Nonroad III, Brazil MAR-1 and and UN R96 Stage IIIA emission standards.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1800-2200 rpm
- Minimum Power 230 bkW308 BHP
- Maximum Power 310 bkW416 BHP
- Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
- Lube System Refill 30 L (31.7 qts)
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 865 kg (1907 lb)
- Industry industrial
EQUIPMENT
C9.3B Standard Equipment
- Air Inlet System
- Turbocharged: system with front and rear exhaust configurations
- Air-to-Air Aftercooled
- Control system
- Available SAE No. 1 flywheel housings with rear power take-off (PTO) drive options for SAE B,
SAE C, or combination. Engine power can also be taken from the front of the engine on some
applications.
- Control System
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Electronic control system with single on-engine ECM
- Over-foam wiring harness
- Automatic altitude compensation
- Cooling System
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels and Flywheel Housing
- Available SAE No. 1 and No. 2 flywheel/housings
- Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary and tertiary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system (OCV) with fumes disposal (optional OCV filter system)
- Oil cooler
- Oil filler
- Lube oil filter
- Choice of front, rear or center sumps
- Oil dipstick
- Gear driven oil pump
- General
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
