SPECIFICATIONS
- Compression Ratio 14.5:1
- Aspiration Turbocharged Aftercooled
- Bore 137.2 mm (5.4 in)
- Displacement 14.6 L (893 in³)
- Stroke 165.1 mm (6.5 in)
- Emissions Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1750-2300 rpm
- Minimum Power 218 bkW292 BHP
- Maximum Power 359 bkW482 BHP
- Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
- Cooling System Capacity 32.2 L (34 qt)
- Lube System Refill 34.1 L (36 qt)
- Industry industrial
EQUIPMENT
3406C Standard Equipment
- Air Inlet System
- Dry or watercooled manifold and turbocharger
- Charging System
- Charging Alternator, 24 volt, 35 amp
- Control System
- Hydra-mechanical governor
- Cooling System
- Thermostats and housing
- Jacket water pump, gear driven, centrifugal
- Heat exchanger
- Expansion tank
- FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
- Optional Radiator, not UL listed or FM approved
- Exhaust System
- Exhaust manifold, water-cooled (wet) or dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
- Flywheels and Flywheel Housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter, LH
- Fuel transfer pump
- Primary fuel filter / water separator
- Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
- Lube System
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
- Oil filler in valve cover
- Dipstick
- Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- General
- Vibration damper and guard
- Lifting eyes
- Paint - fire pump red, optional radiator painted black
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
