SPECIFICATIONS
- Compression Ratio 16.5:1
- Aspiration Series Turbocharged Aftercooled (TTA)
- Bore 105 mm (4.13 in)
- Displacement 7.01 L (427.7 in³)
- Stroke 135 mm (5.3 in)
- Length 1461 mm (57.5 in)
- Width 714.4 mm (28.1 in)
- Height 618.5-643.9 mm (24.3-25.3 in)
- Emissions U.S. EPA Tier 4 Final, EU Stage IV
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1800-2200 rpm
- Weight 124-134 kg (273.4-295.4 lb)
- Minimum Power 151 bkW202 BHP
- Maximum Power 205 bkW275 BHP
- Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
- Cooling System Capacity 15.2 L (16 qt)
- Lube System Refill 13-16 L (13.7-16.9 qt)
- Diameter 287-337.8 mm (11.3-13.3 in)
- Weight Approximate Net Dry Standard Configuration Without Oil Cooling Clutch Compressor A C 1000 kg (2204 lb)
- Industry industrial
EQUIPMENT
C7.1 ACERT™ Standard Equipment
- Control System
- Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
- Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
- Cooling System
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels and Flywheel Housing
- Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
- Fuel System
- Electronic high pressure common rail
- ACERT™ Technology
- Innovative filter design to ensure maximum protection of the engine
- Lube System
- Wide choice of sumps for different applications
- General
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility
- U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Selective Catalytic Reduction (SCR)
- 3" flex pipe connection with straight, 45°, and 90° options for flexibility
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
