NEW / / industrial / C7 ACERT™
C7 ACERT™
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Compression Ratio 16.2:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 110 mm (4.33 in)
SPECIFICATIONS
- Compression Ratio 16.2:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 110 mm (4.33 in)
- Displacement 7.2 L (442 in³)
- Stroke 127 mm (5.0 in)
- Length 1053 mm (41.5 in)
- Width 758 mm (29.8 in)
- Height 1032 mm (40.6 in)
- Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1800-2200 rpm
- Minimum Power 168 bkW225 BHP
- Maximum Power 224 bkW300 BHP
- Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 588 kg (1296 lb)
- Industry industrial
EQUIPMENT
C7 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Fuel System
- HEUI™ injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
- Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
- General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
360° INTERACTIVE
SPECIFICATIONS
- Compression Ratio 16.2:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 110 mm (4.33 in)
- Displacement 7.2 L (442 in³)
- Stroke 127 mm (5.0 in)
- Length 1053 mm (41.5 in)
- Width 758 mm (29.8 in)
- Height 1032 mm (40.6 in)
- Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1800-2200 rpm
- Minimum Power 168 bkW225 BHP
- Maximum Power 224 bkW300 BHP
- Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 588 kg (1296 lb)
- Industry industrial
EQUIPMENT
C7 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Fuel System
- HEUI™ injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
- Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
- General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
