OVERVIEW
Cat C4.4 ACERT Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C4.4 ACERT engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.
SPECIFICATIONS
- Compression Ratio 16.5:1
- Aspiration Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
- Bore 105 mm (4.13 in)
- Displacement 4.4 L (268.5 in³)
- Stroke 127 mm (5.00 in)
- Length 647-828 mm (25.5-32.6 in)
- Width 365-695 mm (14.3-27.4 in)
- Height 279-430 mm (11-16.9 in)
- Emissions U.S. EPA Tier 4 Final, EU Stage IV
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2200 rpm
- Weight 34-80 kg (75-17;6.4 lb)
- Minimum Power 65.9 bkW88.4 BHP
- Maximum Power 129.4 bkW173.5 BHP
- Engine Configuration Inline 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 10.8 L (11.4 qt)
- Lube System Refill 5.2-13.5 L (5.5-14.27 qt)
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 400-420 kg (881.8-926 lb)
- Diameter 224.9-270.3 mm (9.6-10.6 in)
- Industry industrial
- Overview Cat C4.4 ACERT Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C4.4 ACERT engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.
EQUIPMENT
C4.4 Standard Equipment
- Air Inlet System
- Standard air cleaners
- Control System
- Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
- Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
- Cooling System
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
- Flywheels and Flywheel Housing
- Wide choice of drivetrain interfaces, including SAE No. 2 and SAE No. 3 configurations
- Fuel System
- Electronic high pressure common rail
- ACERT™ Technology
- Innovative filter design to ensure maximum protection of the engine
- Lube System
- Wide choice of sumps for different applications
- Power Take Off
- SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
- General
- Available with or without a balancer
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIB Equivalent Aftertreatment / Clean Emissions Control Equipment
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- No ash service requirement
- Passive regeneration
- U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- 3" flex pipe connection with straight, 45°, and 90° options for flexibility
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
![3406C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
![3412C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![C18 ACERT™ - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C4.4-5c950b78a914ef35e107390ca051339e.jpeg)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)