SPECIFICATIONS
- Compression Ratio 17:1
- Aspiration Turbocharged-Aftercooled (TA)
- Bore 99 mm (3.9 in)
- Displacement 3.4 L (207.5 in³)
- Stroke 110 mm (4.3 in)
- Length 610 mm (24 in)
- Width 623 mm (24.5 in)
- Height 805.5 mm (31.7 in)
- Emissions U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. U.S. EPA Tier 4 Interim Equivalent and EU Stage IIIB Equivalent ratings available using EPA or EU Flex Provisions.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2200 & 2500 rpm
- Minimum Power 63 bkW84.5 BHP
- Maximum Power 90 bkW121 BHP
- Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 6 L (6.3 qt)
- Combustion System Direct Injection
- Doc Diameter 196 mm (7.7 in)
- Doc Length 320 mm (12.6 in)
- Doc Weight 15 kg (33 lb)
- Dry Weight Basic Operating Engine Without Optional Attachments 270 kg (595.2 lbs)
- Scr Diameter 251 mm (9.88 in)
- Scr Length 520 mm (20.47 in)
- Scr Weight 20 kg (44 lb)
- Industry industrial
EQUIPMENT
C3.4B, Greater than 56 kW (75 hp) Standard Equipment
- Air Inlet System
- Induction manifolds
- Exhaust manifolds
- Control System
- Starter motor
- Alternator
- Electronic Control Unit
- Sensors for: engine speed, oil pressure, and coolant temperature
- Flywheels and Flywheel Housing
- Flywheel housings
- Flywheel and starter rings
- Fuel System
- Fuel filter positions
- Common rail fuel pump and injectors
- General
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
-e1b4b397424e697c91460f6fb310feb5.jpeg)
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
