SPECIFICATIONS
- Compression Ratio 17:1
- Aspiration Turbocharged (T) and Turbocharged-Aftercooled (TA)
- Bore 90 mm (3.5 in)
- Displacement 2.8 L (171 in³)
- Stroke 110 mm (4.3 in)
- Length 635 mm (25.0 in)
- Width 561 mm (22.1 in)
- Height 766 mm (30.2 in)
- Emissions U.S. EPA Tier 4 Final Nonroad Emission Standards. Also designed to meet proposed EU Stage V Nonroad Emission Standards.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2500 rpm
- Minimum Power 45 bkW60 BHP
- Maximum Power 55 bkW74 BHP
- Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 4 L (1.06 qt)
- Combustion System Direct Injection
- Doc Diameter TBA
- Doc Length TBA
- Doc Weight TBA
- Dry Weight Basic Operating Engine Without Optional Attachments 245 kg (540 lb)
- Industry industrial
EQUIPMENT
C2.8 Standard Equipment
- Air Inlet System
- Induction manifolds
- Exhaust manifolds
- Engine-mounted aftertreatment
- Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels and Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Final, proposed EU Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC) (Tier 4 Final and Stage V)
- Diesel Particulate Filter (DPF) (Stage V)
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
