OVERVIEW
The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.
SPECIFICATIONS
- Compression Ratio 18:1
- Aspiration Turbocharged (T) or Turbocharged-Aftercooled (TA)
- Bore 84 mm (3.3 in)
- Displacement 2.2 L (135 in³)
- Stroke 100 mm (3.9 in)
- Length 408.4 mm (16.07 in)
- Width 534 mm (21.0 in)
- Height 751 mm (29.6 in)
- Emissions U.S. EPA Tier 4 Final, EU Stage V
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2800 rpm
- Weight 5.8 kg (12.79 lb)
- Minimum Power 45 bkW60 BHP
- Maximum Power 55 bkW74 BHP
- Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 4.3 L (4.5 qt)
- Lube System Refill 9.3 L (9.8 qt)
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 252 kg (556 lbs)
- Diameter 155 mm (6.1 in)
- Industry industrial
- Overview The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.
EQUIPMENT
C2.2 Standard Equipment
- Control System
- Alternator 12 volt 85 amp
- Starter motor 12 volt
- Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
- Electronic control unit - chassis mounted
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
- Flywheels and Flywheel Housing
- SAE No. 4 standard flywheel housing
- Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
- Fuel System
- 2000 bar high-pressure common rail system
- Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- General
- Cast iron engine block
- Cast iron exhaust manifold
- Gradeability 35° continuous
- Paint: Cat yellow
- U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
360° INTERACTIVE
Exterior
OVERVIEW
The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.
SPECIFICATIONS
- Compression Ratio 18:1
- Aspiration Turbocharged (T) or Turbocharged-Aftercooled (TA)
- Bore 84 mm (3.3 in)
- Displacement 2.2 L (135 in³)
- Stroke 100 mm (3.9 in)
- Length 408.4 mm (16.07 in)
- Width 534 mm (21.0 in)
- Height 751 mm (29.6 in)
- Emissions U.S. EPA Tier 4 Final, EU Stage V
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2800 rpm
- Weight 5.8 kg (12.79 lb)
- Minimum Power 45 bkW60 BHP
- Maximum Power 55 bkW74 BHP
- Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel
- Cooling System Capacity 4.3 L (4.5 qt)
- Lube System Refill 9.3 L (9.8 qt)
- Combustion System Direct Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 252 kg (556 lbs)
- Diameter 155 mm (6.1 in)
- Industry industrial
- Overview The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.
EQUIPMENT
C2.2 Standard Equipment
- Control System
- Alternator 12 volt 85 amp
- Starter motor 12 volt
- Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
- Electronic control unit - chassis mounted
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
- Flywheels and Flywheel Housing
- SAE No. 4 standard flywheel housing
- Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
- Fuel System
- 2000 bar high-pressure common rail system
- Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- General
- Cast iron engine block
- Cast iron exhaust manifold
- Gradeability 35° continuous
- Paint: Cat yellow
- U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
