OVERVIEW
The Cat® C1.5 Industrial Diesel Engine is offered in rating 18.4 bkW (24.7 bhp) @ 1800 rpm and meet U.S. EPA Tier 4 Final emission standards. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
SPECIFICATIONS
- Compression Ratio 22.5:1
- Aspiration Naturally Aspirated (NA) or Turbocharged (T)
- Bore 84 mm (3.3 in)
- Displacement 1.496 L (91 in³)
- Stroke 90 mm (3.5 in)
- Length 449 mm, 17.6 in
- Width 453-512 mm (17.8-20.2 in)
- Height 643 mm (25.3 in)
- Emissions U.S. EPA Tier 4 Final
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1800 rpm
- Weight 13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)
- Minimum Power 18.4 bkW24.7 BHP
- Maximum Power 18.4 bkW24.7 BHP
- Engine Configuration In-Line 3, 4-Stroke-Cycle Diesel
- Cooling System Capacity 2.6 L (2.75 qt)
- Lube System Refill 6 L (6.3 qt)
- Combustion System Indirect Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 149-156.5 kg (328.5-345 lb)
- Diameter 170 mm (6.7 in)
- Industry industrial
- Overview The Cat® C1.5 Industrial Diesel Engine is offered in rating 18.4 bkW (24.7 bhp) @ 1800 rpm and meet U.S. EPA Tier 4 Final emission standards. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
EQUIPMENT
C1.5 Standard Equipment
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Flywheel & Flywheel Housing
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
- Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
- Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
- EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel
- Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for Power Take Off (PTO)
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Tier 4 Final Aftertreatment / Clean Emissions Control Equipment)
- Diesel Particulate Filter (DPF)
- Diesel Oxidation Catalyst (DOC)
- Passive Regeneration System with Backup
RELATED PRODUCTS
![3406C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
![3412C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![C18 ACERT™ - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.5-084949c805840c30efa3997412df3f42.jpeg)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)