OVERVIEW
C1.1 Industrial Power Units, with the rating: 17.9 bkW (24 bhp) @ 3000 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available for U.S. EPA Flexibility and for Europe and, depending on applicable emission standards, may be introduced in other regulated jurisdictions. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
- Minimum Rating 17.9 bkW24 BHP
- Maximum Rating 17.9 bkW24 BHP
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
- Displacement 1.131 L (69 in³)
- Stroke 81 mm (3.19 in)
- Length 778 mm (30.6 in)
- Width 438 mm (17.2 in)
- Height 730 mm (28.7 in)
- Emissions U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 3000 rpm
- Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
- Cooling System Capacity 5.21 L (5.5 qt)
- Lube System Refill 4.9 L (5.2 qt)
- Weight Net Dry Standard Configuration Without Oil Cooling Clutch Compressor A C 129 kg (284 lb)
- Industry industrial
- Overview C1.1 Industrial Power Units, with the rating: 17.9 bkW (24 bhp) @ 3000 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available for U.S. EPA Flexibility and for Europe and, depending on applicable emission standards, may be introduced in other regulated jurisdictions. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
EQUIPMENT
C1.1 Standard Equipment
- Air Inlet System
- Inlet manifold
- Control System
- Alternator 12 volt 15 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted radiator and fan
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- SAE No. 5 flywheel housing
- Fuel System
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
RELATED PRODUCTS
![3406C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
![3412C - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3508 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3512 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![3516 - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
![C18 ACERT™ - Industrial](https://barloworld-equipment.com/hubfs/products/industrial-C1.1-5aa892589a84a0b231dbc8ae23bb7af3.jpeg)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)