NEW / / industrial / C1.1
C1.1
OVERVIEW
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
OVERVIEW
The Cat C1.1 Industrial Power Unit is offered in ratings ranging from 14.4-18.4 bkW/19.3-24.7 bhp @ 2200-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 17.3-18.1 bkW (23.2-24.3 bhp) @ 2800-3000 rpm are available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
- Displacement 1.131 L (69 in³)
- Stroke 81 mm (3.19 in)
- Length 778 mm (30.6 in)
- Width 438 mm (17.2 in)
- Height 730 mm (28.7 in)
- Emissions 14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 3000 rpm
- Minimum Power 14.4 bkW19.3 BHP
- Maximum Power 19.7 bkW26.4 BHP
- Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
- Cooling System Capacity 5.21 L (5.5 qt)
- Lube System Refill 4.9 L (5.2 qt)
- Weight Approximate Net Dry Standard Configuration Without Oil Cooling Clutch Compressor A C 129 kg (284 lb)
- Industry industrial
- Overview The Cat C1.1 Industrial Power Unit is offered in ratings ranging from 14.4-18.4 bkW/19.3-24.7 bhp @ 2200-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 17.3-18.1 bkW (23.2-24.3 bhp) @ 2800-3000 rpm are available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
EQUIPMENT
C1.1 Standard Equipment
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted radiator and fan
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- SAE No. 5 flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
- Fuel System
- Fuel injection pump
- Fuel filter
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
360° INTERACTIVE
OVERVIEW
The Cat C1.1 Industrial Power Unit is offered in ratings ranging from 14.4-18.4 bkW/19.3-24.7 bhp @ 2200-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 17.3-18.1 bkW (23.2-24.3 bhp) @ 2800-3000 rpm are available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
- Displacement 1.131 L (69 in³)
- Stroke 81 mm (3.19 in)
- Length 778 mm (30.6 in)
- Width 438 mm (17.2 in)
- Height 730 mm (28.7 in)
- Emissions 14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 3000 rpm
- Minimum Power 14.4 bkW19.3 BHP
- Maximum Power 19.7 bkW26.4 BHP
- Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
- Cooling System Capacity 5.21 L (5.5 qt)
- Lube System Refill 4.9 L (5.2 qt)
- Weight Approximate Net Dry Standard Configuration Without Oil Cooling Clutch Compressor A C 129 kg (284 lb)
- Industry industrial
- Overview The Cat C1.1 Industrial Power Unit is offered in ratings ranging from 14.4-18.4 bkW/19.3-24.7 bhp @ 2200-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 17.3-18.1 bkW (23.2-24.3 bhp) @ 2800-3000 rpm are available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
EQUIPMENT
C1.1 Standard Equipment
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted radiator and fan
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- SAE No. 5 flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
- Fuel System
- Fuel injection pump
- Fuel filter
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
