NEW / / industrial / C1.1
C1.1
OVERVIEW
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
OVERVIEW
The C1.1 Industrial Diesel Engine is offered in ratings ranging from 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm. These ratings meet EPA Tier 4 Final emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers and Underground Mining Equipment.
SPECIFICATIONS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
- Displacement 1.13 L (69 in³)
- Stroke 81 mm (3.19 in)
- Length 491 mm (19.33 in)
- Width 400 mm (15.7 in)
- Height 576 mm (22.7 in)
- Emissions U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2200-3400 rpm
- Minimum Power 14.1 bkW19.1 BHP
- Maximum Power 21 bkW28.2 BHP
- Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
- Lube System Refill 3.4-4.4 L (3.6-4.6 qt)
- Combustion System Indirect Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 87 kg (191 lb)
- Industry industrial
- Overview The C1.1 Industrial Diesel Engine is offered in ratings ranging from 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm. These ratings meet EPA Tier 4 Final emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers and Underground Mining Equipment.
EQUIPMENT
C1.1 Standard Equipment
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 40 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Paint: Caterpillar yellow, with optional colors available at request
360° INTERACTIVE
OVERVIEW
The C1.1 Industrial Diesel Engine is offered in ratings ranging from 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm. These ratings meet EPA Tier 4 Final emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers and Underground Mining Equipment.
SPECIFICATIONS
- Compression Ratio 23:1
- Aspiration Naturally Aspirated (NA)
- Bore 77 mm (3.03 in)
- Displacement 1.13 L (69 in³)
- Stroke 81 mm (3.19 in)
- Length 491 mm (19.33 in)
- Width 400 mm (15.7 in)
- Height 576 mm (22.7 in)
- Emissions U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Rotation From Flywheel End Counterclockwise
- Rated Speed 2200-3400 rpm
- Minimum Power 14.1 bkW19.1 BHP
- Maximum Power 21 bkW28.2 BHP
- Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
- Lube System Refill 3.4-4.4 L (3.6-4.6 qt)
- Combustion System Indirect Injection
- Weight Net Dry Basic Operating Engine Without Optional Attachments 87 kg (191 lb)
- Industry industrial
- Overview The C1.1 Industrial Diesel Engine is offered in ratings ranging from 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm. These ratings meet EPA Tier 4 Final emission standards. They are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers and Underground Mining Equipment.
EQUIPMENT
C1.1 Standard Equipment
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 40 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Paint: Caterpillar yellow, with optional colors available at request
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
