C0.7 industria

  • Compression Ratio 23.5:1
  • Aspiration Naturally Aspirated (NA)
  • Bore 67 mm (2.64 in)

SPECIFICATIONS

  • Compression Ratio 23.5:1
  • Aspiration Naturally Aspirated (NA)
  • Bore 67 mm (2.64 in)
  • Displacement .762 L (46.5 in³)
  • Stroke 72 mm (2.83 in)
  • Length 480 mm (18.9 in)
  • Width 371 mm (14.6 in)
  • Height 528 mm (20.8 in)
  • Emissions U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
  • Rotation From Flywheel End Counterclockwise
  • Rated Speed 2800-3600 rpm
  • Minimum Power 12.2 bkW16.4 BHP
  • Maximum Power 15.3 bkW20.5 BHP
  • Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
  • Lube System Refill 2.35-3.05 L (2.48-3.22 qt)
  • Combustion System Indirect Injection
  • Weight Net Dry Basic Operating Engine Without Optional Attachments 71 kg (156.5 lb)
  • Industry industrial

EQUIPMENT

C0.7 Standard Equipment

  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel and Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

RELATED PRODUCTS

3406C - Industrial

3406C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled
  • Bore: 137.2 mm (5.4 in)
Get a quote
3412C - Industrial

3412C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 137.2 mm (5.4 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
C18 ACERT™ - Industrial

C18 ACERT™

industrial

  • Compression Ratio: 16.3:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 145 mm (5.71 in)
Get a quote
Get a quote