SPECIFICATIONS
- Compression Ratio 14.7:1
- Aspiration Turbocharged Aftercooled
- Bore 170 mm (6.7 in)
- Displacement 78 L (4760 in³)
- Stroke 215 mm (8.5 in)
- Length 3278 mm (129.1 in)
- Width 1530 mm (60.2 in)
- Height 2062 mm (81.2 in)
- Emissions U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1750 rpm
- Minimum Power 1506 bkW2100 BHP
- Maximum Power 1506 bkW2100 BHP
- Engine Configuration V-16, 4-Stroke-Cycle Diesel
- Lube System Refill 807 L (852 qt)
- Weight Net Dry Basic Operating Engine Without Optional Attachments 7840 kg (17284 lb)
- Industry industrial
EQUIPMENT
3516C Standard Equipment
- Air Inlet System
- Air to Air Aftercooled (ATAAC)
- Four turbochargers, center mounted
- Control System
- ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
- Cooling System
- Thermostats and housing
- Gear driven centrifugal jacket water pump
- Connections for radiator cooling
- Exhaust System
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
- Two exhaust outlets, 203 mm (8 in) round flange
- Flywheels and Flywheel Housing
- SAE No. 00 flywheel (183 teeth)
- SAE No. 00 flywheel housing
- Fuel System
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
- Instrumentation
- No standard instrument or gauge panel
- Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
- Protection System
- ADEM A4 ECM monitoring system to provide customer programmable engine
- Deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40 pin customer interface connection
- Starting System
- Dual 24V electric starting motor, LH, unwired
- General
- Paint: Caterpillar yellow
- Vibration damper
- Lifting eyes
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
