NEW / / industrial / 3412C
3412C
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Compression Ratio 14.5:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 137.2 mm (5.4 in)
SPECIFICATIONS
- Compression Ratio 14.5:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 137.2 mm (5.4 in)
- Displacement 27 L (1648 in³)
- Stroke 152.4 mm (6.0 in)
- Length 1999.8 mm (78.7 in)
- Height 1413.2 mm (55.6 in)
- Emissions Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1750-2100 rpm
- Minimum Power 476 bkW638 BHP
- Maximum Power 551 bkW739 BHP
- Engine Configuration V-12, 4-Stroke-Cycle Diesel
- Weight Approximate Net Dry Basic Operating Engine Without Optional Attachments 2579 kg (5686 lb)
- Industry industrial
EQUIPMENT
3412C Standard Equipment
- Air Inlet System
- Air cleaner, regular duty with service indicators
- Turbocharged
- Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
- Heat exchanger installed
- Expansion tank
- Control System
- Charging alternator 24 volt, 35 amp
- Governor control
- Hydra-mechanical governor
- Exhaust System
- Exhaust manifold
- Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
- Flywheels & Flywheel Housings
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter
- Fuel transfer pump
- Primary fuel filter
- Fuel priming pump
- Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Tachometer
- Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler in valve cover and dipstick, both RH
- Lube oil filter
- Rear sump oil pan
- Power Take Off
- Power take-off (PTO) flywheel stub shaft
- Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- Starting System
- 24 volt, LH electric starting motor
- Jacket water heater (6 kW, 240-480 volt)
- General
- Paint: Firepump Red
- Vibration damper and guard
- Lifting eyes
360° INTERACTIVE
SPECIFICATIONS
- Compression Ratio 14.5:1
- Aspiration Turbocharged Aftercooled (TA)
- Bore 137.2 mm (5.4 in)
- Displacement 27 L (1648 in³)
- Stroke 152.4 mm (6.0 in)
- Length 1999.8 mm (78.7 in)
- Height 1413.2 mm (55.6 in)
- Emissions Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed
- Rotation From Flywheel End Counterclockwise
- Rated Speed 1750-2100 rpm
- Minimum Power 476 bkW638 BHP
- Maximum Power 551 bkW739 BHP
- Engine Configuration V-12, 4-Stroke-Cycle Diesel
- Weight Approximate Net Dry Basic Operating Engine Without Optional Attachments 2579 kg (5686 lb)
- Industry industrial
EQUIPMENT
3412C Standard Equipment
- Air Inlet System
- Air cleaner, regular duty with service indicators
- Turbocharged
- Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
- Heat exchanger installed
- Expansion tank
- Control System
- Charging alternator 24 volt, 35 amp
- Governor control
- Hydra-mechanical governor
- Exhaust System
- Exhaust manifold
- Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
- Flywheels & Flywheel Housings
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter
- Fuel transfer pump
- Primary fuel filter
- Fuel priming pump
- Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Tachometer
- Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler in valve cover and dipstick, both RH
- Lube oil filter
- Rear sump oil pan
- Power Take Off
- Power take-off (PTO) flywheel stub shaft
- Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- Starting System
- 24 volt, LH electric starting motor
- Jacket water heater (6 kW, 240-480 volt)
- General
- Paint: Firepump Red
- Vibration damper and guard
- Lifting eyes
RELATED PRODUCTS
3406C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled
- Bore: 137.2 mm (5.4 in)
3412C
industrial
- Compression Ratio: 14.5:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 137.2 mm (5.4 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3508
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3512
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
3516
industrial
- Compression Ratio: 13.0:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 170 mm (6.7 in)
C18 ACERT™
industrial
- Compression Ratio: 16.3:1
- Aspiration: Turbocharged Aftercooled (TA)
- Bore: 145 mm (5.71 in)
