3406C industria

  • Compression Ratio 14.5:1
  • Aspiration Turbocharged Aftercooled
  • Bore 137.2 mm (5.4 in)

SPECIFICATIONS

  • Compression Ratio 14.5:1
  • Aspiration Turbocharged Aftercooled
  • Bore 137.2 mm (5.4 in)
  • Displacement 14.6 L (893 in³)
  • Stroke 165.1 mm (6.5 in)
  • Emissions Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
  • Rotation From Flywheel End Counterclockwise
  • Rated Speed 1750-2300 rpm
  • Minimum Power 218 bkW292 BHP
  • Maximum Power 359 bkW482 BHP
  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Cooling System Capacity 32.2 L (34 qt)
  • Lube System Refill 34.1 L (36 qt)
  • Industry industrial

EQUIPMENT

3406C Standard Equipment

  • Air Inlet System
    • Dry or watercooled manifold and turbocharger
  • Charging System
    • Charging Alternator, 24 volt, 35 amp
  • Control System
    • Hydra-mechanical governor
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, gear driven, centrifugal
    • Heat exchanger
    • Expansion tank
    • FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
    • Optional Radiator, not UL listed or FM approved
  • Exhaust System
    • Exhaust manifold, water-cooled (wet) or dry
    • Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel
    • SAE No. 1 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, LH
    • Fuel transfer pump
    • Primary fuel filter / water separator
  • Instrumentation
    • Instrument panel, LH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Water temperature gauge
    • Service meter
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Lube oil filter
    • Oil filler in valve cover and dipstick, both RH
    • Rear sump oil pan
    • Oil filler in valve cover
    • Dipstick
  • Mounting System
    • Supports
  • Power Take-Offs
    • Flywheel stub shaft
  • Protection System
    • Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
  • General
    • Vibration damper and guard
    • Lifting eyes
    • Paint - fire pump red, optional radiator painted black

360° INTERACTIVE

Exterior

Interior

RELATED PRODUCTS

3406C - Industrial

3406C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled
  • Bore: 137.2 mm (5.4 in)
Get a quote
3412C - Industrial

3412C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 137.2 mm (5.4 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
C18 ACERT™ - Industrial

C18 ACERT™

industrial

  • Compression Ratio: 16.3:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 145 mm (5.71 in)
Get a quote