Thermal protection of exhaust system and turbo lines
Engine frame with hood
Guard between engine and hydraulic drive
COMPRESSOR
101.9 m3/min @ 6.9 bar (3,600 ft3/min @ 100 psi), 1,800 rpm, butterfly inlet, spiral valve control
COOLING
Low coolant level switch
Two coolers (split coolers)
Maximum ambient cooling capacity of 52° C (125° F)
Variable speed cooler fans, ECM controlled
HYDRAULIC
Auxiliary circuit pump
Fan pump
Two primary pumps
CAB
Spacious cab is 4.85 m2 (52.22 ft2)
24V to 12V converter
All electric controls for drilling, tramming, leveling plus auxiliary functions
HMI touch screen control
Trainer's seat
Electric horn
Full front drill window
Heavy duty door latches
Roof mounted air conditioning/heating/pressurizing unit; hydraulic driven
Cab ladder, roof platform and railing
Roof window with protective cage
Rubber shock mounted and insulated two-man extra large FOPS cab
Slope indicators
Split operator's console with stainless steel panels and back-lit gauges
Twelve (12) windows (see Climate Groups for glass selection)
Two swing out (2) hinged doors with heavy duty door latching system
Windshield wipers and washer tank kit
Overhead interior dome lights
Dash light on each panel
Lighting package includes 4,200 lumen perimeter flood lights and 1,950 lumen area spotlights
CONTROL
All manuals stored in control system, service, operators and schematics
Engine shut down sequence in control
Drill performance and monitoring/diagnostics system
Electro-pneumatic compressor control system
Filter indicators (air, hydraulic, and compressor)
High/low tram speed select (high only when mast is down) interlock
Mast lock indicator
Electronic controls provides fast and reliable control of all drill functions
ECM proportional fan speed control system
Pump drive gearbox temperature sensor
Rotary head RPM gauge – digital
Tram interlock, machine outside stability limits
Tram interlock, pipe in hole
Tram interlock, mast up and locked or down and parked
Jack/tram interlock
Cab environment control (AC, filter, heat, fan speeds)
Pipe positioner sensor
Drill depth meter
Drill function interlock, carousel in load position
Drill function interlock, carousel not parked
Drill function interlock, mast up and locked
Drill function interlock, rod catcher not closed
Rotary torque control
Head clear interlock, rotary drive clear of carousel
Winch not parked – tram interlock
Jack pressure sensors
Virtual rotary head travel stops
FRAME
Fuel tanks separated with check valves
Hydraulic tank with isolation valves and interlocks
Slip resistant decks and walk ways
3289 L (869 gal) fuel, (2 tanks mounted under power train)
Bolt-on hand rails with kick plates
Four (4) Cat maintenance free batteries
Stainless battery box, sliding drawer type
Four leveling jacks to provide stability drilling with 7° bench angle
Heavy duty tow hooks (front end)
Lift lugs
Pipe loading guide roller
Stationary rear deck
Left rear swing gated handrail
Rear deck bit storage box
Hydraulic viewing hatch with hatch viewing spot light
Walkways around the drill, 360 degrees
Swing up cable steps, egress at each corner of drill
Spring loaded self closing gates
Vertical mast rest at front of drill
Mounting frame for pressure washer with port in fuel and water tanks
UNDERCARRIAGE
Cat undercarriage with full length rock guards and tram distance meter, auto tensioning and 900 mm (35 in) triple grousers
MAST
Up to 49 895 kg (110,000 lb) rated capacity single cylinder pulldown/hoist system
Rotary head gear box, motors choice in attachment packages
Dust hood with hinged quick change dust seal
30 degree angle drilling in 5° increments and mast locks and indicator in cab [25 degree limit for 406 mm (16 in) holes]
Auto cable tensioning system (attached on pull down side)
Sliding deck wrench, hydraulic fork
HOBO (Hydraulic Operated Break-Out wrench)
Mast lanyard mounting plates
Sheave/feed rope guards
Cable pipe catcher
Winch 5443 kg (12,000 lb) lift capacity
Pipe positioner
MISCELLANEOUS
Standard Caterpillar colors
SAFETY
Alloy drill deck covers, for servicing when mast in mast rest
Air hose safety sleeves (whip socks)
Battery disconnect and starter isolation only with lock outs
Seven (7) engine shut down buttons, by each drill egress/access point, in cab, and in engine area on drill deck
Tram alarm, with tram engagement
Strobe beacon on cab and left side of drill
Hinged protective cage for full length drill window
LED night perimeter flood lighting on four sides, LED spot lighting power group area; drill deck; mast carousel; access ladder and walkways for night drilling
A printed copy of the Operation & Maintenance Manual(s) shall be provided with each machine, installed at the factory, and available in the legal language(s) of the country where the machine is to be placed in service: – The language specified on the factory order shall be provided
A separate, weather-resistant literature compartment in the operator's station shall be provided for the Operation & Maintenance Manual and other items related to safe operation and maintenance of the machine: – The compartment shall be lockable or be inside a lockable cab – A lanyard should be used to attach the manual to the machine
Burn protection from exhaust pipes and turbo lines
SERVICE
Loop filters between hydraulic pumps and motors (2) Hydraulic return filters, (1) hydraulic case drain strainer, (2) hydraulic charge filters, compressor oil filters, automatic 45 point lubrication system, centralized
Hydraulic pressure test points
Fast fill refueling system
ROTARY ACCESSORIES
Rotary package for up to 339 mm (13 3∕8 in) OD pipe diameter pipes (drill pipe not included) carousel plates, HOBO inserts, 914 mm (36 in) top sub, deck wrench hoist bell, horse shoe wrench, universal bit basket, deck seals,chock bars pipe rack inserts, bit sub and roller deck bushing
MD6540C Optional Equipment
MISCELLANEOUS
Tow bar assembly
Interface for third party mining systems
Drill pipe thread lubrication
Bit lubricator
Remote jump start terminals
Factory service engineer on site (18 working days) days to direct start-up and commissioning
Cat 374F undercarriage with 750 mm (29.53 in) triple grousers for hard rock
Operator aides: – Mast crown clearance light – Two (2) closed circuit camera (front and left side) with monitor in cab – Hydraulic pipe catcher
360° INTERACTIVE
RELATED PRODUCTS
MD6200
drills
Note: *For width with platform access to cab or service platform walkway contact the factory.
Note: With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
Overview: Designed for longevity and easy access to components, the MD6640 is favored by drillers for dependability and serviceability. Adding to its productivity are smart features such as a simple hydraulics system, reliable electrical in all weather conditions, quick pipe changes, and angle hole drilling to 25° in 5° increments. Efficient and comfortable cab is designed for maximum operator productivity. Additionally, vibration and noise are minimized by the use of proven programmed drill control option with the cushioned centralizer and shock sub.
Thermal protection of exhaust system and turbo lines
Engine frame with hood
Guard between engine and hydraulic drive
COMPRESSOR
101.9 m3/min @ 6.9 bar (3,600 ft3/min @ 100 psi), 1,800 rpm, butterfly inlet, spiral valve control
COOLING
Low coolant level switch
Two coolers (split coolers)
Maximum ambient cooling capacity of 52° C (125° F)
Variable speed cooler fans, ECM controlled
HYDRAULIC
Auxiliary circuit pump
Fan pump
Two primary pumps
CAB
Spacious cab is 4.85 m2 (52.22 ft2)
24V to 12V converter
All electric controls for drilling, tramming, leveling plus auxiliary functions
HMI touch screen control
Trainer's seat
Electric horn
Full front drill window
Heavy duty door latches
Roof mounted air conditioning/heating/pressurizing unit; hydraulic driven
Cab ladder, roof platform and railing
Roof window with protective cage
Rubber shock mounted and insulated two-man extra large FOPS cab
Slope indicators
Split operator's console with stainless steel panels and back-lit gauges
Twelve (12) windows (see Climate Groups for glass selection)
Two swing out (2) hinged doors with heavy duty door latching system
Windshield wipers and washer tank kit
Overhead interior dome lights
Dash light on each panel
Lighting package includes 4,200 lumen perimeter flood lights and 1,950 lumen area spotlights
CONTROL
All manuals stored in control system, service, operators and schematics
Engine shut down sequence in control
Drill performance and monitoring/diagnostics system
Electro-pneumatic compressor control system
Filter indicators (air, hydraulic, and compressor)
High/low tram speed select (high only when mast is down) interlock
Mast lock indicator
Electronic controls provides fast and reliable control of all drill functions
ECM proportional fan speed control system
Pump drive gearbox temperature sensor
Rotary head RPM gauge – digital
Tram interlock, machine outside stability limits
Tram interlock, pipe in hole
Tram interlock, mast up and locked or down and parked
Jack/tram interlock
Cab environment control (AC, filter, heat, fan speeds)
Pipe positioner sensor
Drill depth meter
Drill function interlock, carousel in load position
Drill function interlock, carousel not parked
Drill function interlock, mast up and locked
Drill function interlock, rod catcher not closed
Rotary torque control
Head clear interlock, rotary drive clear of carousel
Winch not parked – tram interlock
Jack pressure sensors
Virtual rotary head travel stops
FRAME
Fuel tanks separated with check valves
Hydraulic tank with isolation valves and interlocks
Slip resistant decks and walk ways
3289 L (869 gal) fuel, (2 tanks mounted under power train)
Bolt-on hand rails with kick plates
Four (4) Cat maintenance free batteries
Stainless battery box, sliding drawer type
Four leveling jacks to provide stability drilling with 7° bench angle
Heavy duty tow hooks (front end)
Lift lugs
Pipe loading guide roller
Stationary rear deck
Left rear swing gated handrail
Rear deck bit storage box
Hydraulic viewing hatch with hatch viewing spot light
Walkways around the drill, 360 degrees
Swing up cable steps, egress at each corner of drill
Spring loaded self closing gates
Vertical mast rest at front of drill
Mounting frame for pressure washer with port in fuel and water tanks
UNDERCARRIAGE
Cat undercarriage with full length rock guards and tram distance meter, auto tensioning and 900 mm (35 in) triple grousers
MAST
Up to 49 895 kg (110,000 lb) rated capacity single cylinder pulldown/hoist system
Rotary head gear box, motors choice in attachment packages
Dust hood with hinged quick change dust seal
30 degree angle drilling in 5° increments and mast locks and indicator in cab [25 degree limit for 406 mm (16 in) holes]
Auto cable tensioning system (attached on pull down side)
Sliding deck wrench, hydraulic fork
HOBO (Hydraulic Operated Break-Out wrench)
Mast lanyard mounting plates
Sheave/feed rope guards
Cable pipe catcher
Winch 5443 kg (12,000 lb) lift capacity
Pipe positioner
MISCELLANEOUS
Standard Caterpillar colors
SAFETY
Alloy drill deck covers, for servicing when mast in mast rest
Air hose safety sleeves (whip socks)
Battery disconnect and starter isolation only with lock outs
Seven (7) engine shut down buttons, by each drill egress/access point, in cab, and in engine area on drill deck
Tram alarm, with tram engagement
Strobe beacon on cab and left side of drill
Hinged protective cage for full length drill window
LED night perimeter flood lighting on four sides, LED spot lighting power group area; drill deck; mast carousel; access ladder and walkways for night drilling
A printed copy of the Operation & Maintenance Manual(s) shall be provided with each machine, installed at the factory, and available in the legal language(s) of the country where the machine is to be placed in service: – The language specified on the factory order shall be provided
A separate, weather-resistant literature compartment in the operator's station shall be provided for the Operation & Maintenance Manual and other items related to safe operation and maintenance of the machine: – The compartment shall be lockable or be inside a lockable cab – A lanyard should be used to attach the manual to the machine
Burn protection from exhaust pipes and turbo lines
SERVICE
Loop filters between hydraulic pumps and motors (2) Hydraulic return filters, (1) hydraulic case drain strainer, (2) hydraulic charge filters, compressor oil filters, automatic 45 point lubrication system, centralized
Hydraulic pressure test points
Fast fill refueling system
ROTARY ACCESSORIES
Rotary package for up to 339 mm (13 3∕8 in) OD pipe diameter pipes (drill pipe not included) carousel plates, HOBO inserts, 914 mm (36 in) top sub, deck wrench hoist bell, horse shoe wrench, universal bit basket, deck seals,chock bars pipe rack inserts, bit sub and roller deck bushing
MD6540C Optional Equipment
MISCELLANEOUS
Tow bar assembly
Interface for third party mining systems
Drill pipe thread lubrication
Bit lubricator
Remote jump start terminals
Factory service engineer on site (18 working days) days to direct start-up and commissioning
Cat 374F undercarriage with 750 mm (29.53 in) triple grousers for hard rock
Operator aides: – Mast crown clearance light – Two (2) closed circuit camera (front and left side) with monitor in cab – Hydraulic pipe catcher
RELATED PRODUCTS
MD6200
drills
Note: *For width with platform access to cab or service platform walkway contact the factory.
Note: With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
Overview: Designed for longevity and easy access to components, the MD6640 is favored by drillers for dependability and serviceability. Adding to its productivity are smart features such as a simple hydraulics system, reliable electrical in all weather conditions, quick pipe changes, and angle hole drilling to 25° in 5° increments. Efficient and comfortable cab is designed for maximum operator productivity. Additionally, vibration and noise are minimized by the use of proven programmed drill control option with the cushioned centralizer and shock sub.
