SPECIFICATIONS
- Note With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
- Industry drills
- Overview N
EQUIPMENT
MD6250 Optional Equipment
- FRAME
- Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (Required for autonomy packages)
- Platform to mount fire suppression bottles
- Jib crane ready
- MAST
- Overhead winch assembly with cable and hook, plus with remote control; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
- Tool lubrication system for Rotary Drilling with 113 L (30 gal) capacity
- Pipe thread greaser with reloadable tank for disposable grease bucket
- SERVICE TOOLS
- Bushing retention tool – 102-194 mm (4.0-7.625 in)
- OPERATOR ENVIRONMENT
- Fold up trainer’s seat with seat belt
- Cab pressure gauge
- Window shades
- Cab roof access system with ladder, cage and rails (only available with cascading stairs and cab walkway)
- Hydraulic viewing hatch with spotlight
- Control package for drill assist; single-pass auto drill
- TECHNOLOGY PRODUCTS
- Product Link Elite; satellite, cellular or dual
- Terrain guidance system hardware
- DUST SUPPRESSION
- Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dust collector)
- Tram off spray system
- WORK TOOLS
- Lifting bails (available on request; required for commissioning)
– API thread 89 mm (3.5 in)
– API thread 114 mm (4.5 in)
– API thread 140 mm (5.5 in)
– BECO thread 102 mm (4.0 in)
– BECO thread 114 mm (4.5 in)
– BECO thread 152 mm (6.0 in)
- DRILL BITS, ROTARY TRICONE
- Recommended for Rotary or DTH Dual Purpose
- All bits have standard nozzles
- Obtain S/M/H codes from the Rock Formation to Bit Conversion table https://catpublications.com search for PEXQ1027
- Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may require an additional truck.
– 171 mm (6.75 in), Option 1, (S2)
– 171 mm (6.75 in), Option 2, (M1)
– 171 mm (6.75 in), Option 3, (M3)
– 200 mm (7.875 in), Option 1, (S2)
– 200 mm (7.875 in), Option 2, (M1)
– 200 mm (7.875 in), Option 3, (M3)
– 229 mm (9.0 in), Option 1, (S3)
– 229 mm (9.0 in), Option 2, (M2)
– 229 mm (9.0 in), Option 3, (H1)
– 251 mm (9.875 in), Option 1, (M1)
– 251 mm (9.875 in), Option 2, (M3)
– 251 mm (9.875 in), Option 3, (H1)
- DRILL PIPE
- Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in) - Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in) - Dual purpose carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of two (2)
– Quantity of two (2) 3 m (10 ft) starter pipes are included in the drill tool package
– 140 mm (5.5 in)
– 168 mm (6.625 in) - Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast – Accepts quantity of two (2)
– Quantity of two (2) 7.6 m (25 ft) starter pipes are included in the drill tool package
– 168 mm (6.625 in)
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
MD6200
drills
- Note: *For width with platform access to cab or service platform walkway contact the factory.
- Industry: drills
- Overview: MD6200 Rotary Blasthole Drill Specifications – 11 m (36 ft)
MD6250
drills
- Note: With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
- Industry: drills
- Overview: N
MD6310
drills
- Type: Autonomy ready
- Note: Variable speed control
- Note 1: Hydraulic, indexing pipe carousels accept various pipe diameters
MD6540C
drills
- Engine Model: Cat® 3512C HD, 1,800 rpm
- Brakes: Spring set, hydraulic release
- Type: Full Autonomy
MD6640
drills
- Industry: drills
- Overview: Designed for longevity and easy access to components, the MD6640 is favored by drillers for dependability and serviceability. Adding to its productivity are smart features such as a simple hydraulics system, reliable electrical in all weather conditions, quick pipe changes, and angle hole drilling to 25° in 5° increments. Efficient and comfortable cab is designed for maximum operator productivity. Additionally, vibration and noise are minimized by the use of proven programmed drill control option with the cushioned centralizer and shock sub.
