SPECIFICATIONS
- Type Autonomy ready
- Note Variable speed control
- Note 1 Hydraulic, indexing pipe carousels accept various pipe diameters
- Note 2 Configuration choices include single pass, multi pass, vertical or angle drilling
- Industry drills
- Overview N
EQUIPMENT
MD6310 Optional Equipment
- FRAME
- Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
- Fast fuel fill 578 L (150 gal) per min
- MAST
- Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck
- Rotary tool lubrication, 113 L (30 gal) oil injection system
- Mast access ladder, mast grating and lanyard posts
- DECK MISCELLANEOUS
- Pipe thread greaser
- Tool box
- OPERATOR ENVIRONMENT
- Trainer seat that folds away
- Window shades
- Manometer pressure gauge
- Cab roof access ladder
- POWER GROUP
- Machine blown down kit for auxiliary air to clean the machine
- SERVICE TOOLS OPTIONS
- Bushing Retention Tool 178 to 235 mm (7 to 9.25 in) pipe diameter
- Lifting bails (available on request; required for commissioning)
- API thread
– 114 mm (4.5 in)
– 140 mm (5.5 in)
– 168 mm (6.625 in) for top sub/shock sub - BECO thread
– 108 mm (4.5 in) for 114 mm (7 in) pipe
– 152 mm (6 in) for 193 mm (7.625 in) up to 235 mm (9.25 in) pipe
- TECHNOLOGY PRODUCTS
- Product Link Elite – cellular
- Product Link Elite – satellite
- Product Link Elite – Dual (cellular and satellite)
- Terrain for Drilling
- GROUND ENGAGING TOOLS
- Drill bits, rotary tricone
– 228 mm (9.0 in), OPT 1, (S3)
– 228 mm (9.0 in), OPT 2, (M2)
– 228 mm (9.0 in), OPT 3, (H1)
– 251 mm (9.875 in), OPT 1, (M1)
– 251 mm (9.875 in), OPT 2, (M3)
– 251 mm (9.875 in), OPT 3, (H1)
– 270 mm (10.625 in), OPT 1, (S3)
– 270 mm (10.625 in), OPT 2, (M3)
– 270 mm (10.625 in), OPT 3, (H1)
– 311 mm (12.25 in), OPT 1, (M1)
– 311 mm (12.25 in), OPT 2, (M3)
– 311 mm (12.25 in), OPT 3, (H1)
- DUST SUPPRESSION
- Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
- Tram off spray system
- DRILL PIPE
- 12.1 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel accepts quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 193 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in) - 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel accepts quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 193 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in)
– Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
- DEALER OPTIONS
- Window tint/film
- Kit to convert Genset ready from 50 Hz to 60 Hz
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
MD6200
drills
- Note: *For width with platform access to cab or service platform walkway contact the factory.
- Industry: drills
- Overview: MD6200 Rotary Blasthole Drill Specifications – 11 m (36 ft)
MD6250
drills
- Note: With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
- Industry: drills
- Overview: N
MD6310
drills
- Type: Autonomy ready
- Note: Variable speed control
- Note 1: Hydraulic, indexing pipe carousels accept various pipe diameters
MD6540C
drills
- Engine Model: Cat® 3512C HD, 1,800 rpm
- Brakes: Spring set, hydraulic release
- Type: Full Autonomy
MD6640
drills
- Industry: drills
- Overview: Designed for longevity and easy access to components, the MD6640 is favored by drillers for dependability and serviceability. Adding to its productivity are smart features such as a simple hydraulics system, reliable electrical in all weather conditions, quick pipe changes, and angle hole drilling to 25° in 5° increments. Efficient and comfortable cab is designed for maximum operator productivity. Additionally, vibration and noise are minimized by the use of proven programmed drill control option with the cushioned centralizer and shock sub.
