Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER SYSTEMS
INDUSTRIAL
OIL AND GAS
US
METRIC
815
KEY SPECS
- Gross Power (SAE J1995:2014) 212kW
- Net Power (SAE J1349:2011) 186kW
- Net Power (ISO 9249:2007) 186kW
OVERVIEW
BENEFITS
-
IMPROVED TECHNOLOGY
- Boost your productivity with technologies like Cat Compact 3D Mapping and Cat Compaction Control with Machine Drive Power.
-
LOW MAINTENANCE
- Designed to reduce your service and maintenance costs with longer filter life.
-
ENHANCED OPERATOR COMFORT
- Updated cab with quiet steering, new seat and adjustable controls helps operators work more productively throughout the day.
FEATURES AT A GLANCE
OPERATOR COMFORT AND CONTROL
- Improved ingress/egress with an improved cab with flip up armrest.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
- Safety and visibility enhanced with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Premium plus seat with leather finish containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening.
- Improved comfort with low operator sound levels.
- Improved spectator sound levels and optional low sound packages.
TOP-TIER SERVICE AND SUPPORT
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
– Hydraulic oil cooler, fuel cooler, and condenser grouped together
– Centralized grease points - Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
POWERFUL EFFICIENCY
- Powerful, responsive Cat® 7.1 engine is designed for maximum fuel economy and increased power density.
- Reliable performance and low emissions.
- High productivity with optional four-way tilting blade.
- Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 3 and EU Stage IIIA equivalent.
- For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing SCR technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points with the all new Advanced Productivity Electronic Control System (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed and reduce fuel burn.
PRODUCTIVITY WITH TECHNOLOGY
- Optional Cat Compact 3D mapping technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Cat Compaction Control with Machine Drive Power (MDP) is an energy-based measurement system that correlates compaction with rolling resistance to provide an indication of soil stiffness.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
OPTIMIZE COMPACTION
- Chevron tamping tip design provides greater ground pressure, more compaction, excellent traction, and a smooth ride.
- Symmetrical tamping tip pattern results in equal compaction in forward or reverse. Tips are full perimeter and replaceable. The tip is welded to a base assembly, then welded directly to the drum.
- Each wheel has two cleaner bars to keep the drums free of carryover dirt, regardless of rolling direction so efficiency is maximized.
- The adjustable cleaner bar tips (standard or abrasive type) are heat-treated and direct-hardened cutting edge steel to increase wear life, which translates into lower operating costs.
SPECIFICATIONS
- Gross Power (SAE J1995:2014) 212kW
- Net Power (SAE J1349:2011) 186kW
- Net Power (ISO 9249:2007) 186kW
- Engine Power (ISO 14396:2002) 205kW
- Emissions Option 1 - U.S. EPA Tier 4 Final/EU Stage V
- Engine Model Cat® C7.1
- Rated Speed 2200r/min
- Torque Rise 52%
- Note (1) Net power available at flywheel when the engine is equipped with fan, air cleaner, aftertreatment, and alternator with engine speed at 2,200 rpm.
- Emissions Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Rated Speed 2200 r/min
- Net Power - ISO 9249:2007 186kW
- Gross Power - SAE J1995:2014 213kW
- Peak Torque ( 1,400 rpm ) 1016N·m
- Torque Rise 26%
- Note (2) Net power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,200 rpm.
- Bore 105mm
- Stroke 135mm
- Displacement 7.01l
- High Idle Speed 2270r/min
- Low Idle Speed 800r/min
- Maximum Altitude - Without Derating 3000m
- Operating Weight (Tier 4 Final/Stage V) 22522kg
- Operating Weight (Tier 3/Stage IIIA equivalent) 22232kg
- Transmission Type Cat Planetary Power Shift
- Travel Speeds - Forward - First 6.3km/h
- Travel Speeds - Forward - Second 10.8km/h
- Travel Speeds - Forward - Third 18.2km/h
- Travel Speeds - Reverse - First 7.2km/h
- Travel Speeds - Reverse - Second 12.4km/h
- Travel Speeds - Reverse - Third 18.4km/h
- Lift/Tilt System - Circuit Pilot operated Load Sensing valve with EH
- Lift/Tilt System Variable displacement piston
- Maximum Flow at 2,200 rpm 89l/min
- Relief Valve Setting - Lift/Tilt 22000kPa
- Cylinders, Double Acting: Lift, Bore, Stroke 101.6 mm x 627 mm (4.0 in x 24.7 in)
- Cylinders, Double Acting: Left and Right Tilt, Bore, Stroke 101.6 mm x 167 mm (4.0 in x 6.6 in)
- Pilot System Open center, fixed displacement gear
- Pilot Relief Valve Setting 21000kPa
- Steering System - Circuit Pilot, Load Sensing
- Steering System - Pump Piston – Variable Displacement
- Maximum Flow at 2,200 rpm 147l/min
- Relief Valve Setting - Steering 27600kPa
- Total Steering Angle 84°
- Steering Cycle Times - High Idle 3.0s
- Steering Cycle Times - Low Idle 8.2s
- Fuel Tank 500l
- Diesel Exhaust Fluid Tank 16l
- Cooling Systems - Tier 4 Final/EU Stage V 81l
- Cooling System - Tier 3/Stage IIIA Equivalent 73l
- Engine Crankcase 20l
- Transmission 56l
- Differential - Final Drives - Front 65l
- Differential - Final Drives - Rear 65l
- Hydraulic Tank Only 75l
- Note Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
- Front Planetary – Fixed
- Rear Planetary – Oscillating
- Oscillation Angle ±10
- Service Brakes Single Disc Wet (Enclosed) 2 WHL
- Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.994 tons).
- Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)
- Machine Sound Power Level (ISO 6395:2008) 112dB(A)
- Machine Sound Power Level (ISO 6395:2008)*** 109dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*,*** 70dB(A)
- Machine Sound Power Level (ISO 6395:2008)** 107dB(A)
- Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
- Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
- Note (3) ***Sound suppression equipped
- Note (4) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (5) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (6) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)
- Machine Sound Power Level (ISO 6395:2008) 112dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*** 70dB(A)
- Machine Sound Power Level (ISO 6395:2008)*** 110dB(A)
- Note (1) ***Sound suppression equipped
- Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Capacity 2.06m³
- Overall Width 3761mm
- Height 860mm
- Digging Depth 222mm
- Ground Clearance 802mm
- Maximum Tilt 346mm
- Turning Radius - Outside Corner of Blade 6437mm
- Turning Radius - Inside Face of Pusharm 2520mm
- Weight 800kg
- Total Operating Weight 22522kg
- Weight 4409kg
- Outside Diameter 1412mm
- Drum Diameter 1029mm
- Drum Width 991mm
- Tips per Row 12
- Tips per Wheel 60
- Replaceable Weld On
- Width - Over Drums 3243mm
- Width Between Drums 1261mm
- Tip Height 192mm
- Height - Top of Beacon 3933mm
- Height - Top of Cab Roof 3650mm
- Height - Top of Exhaust Pipe 3394mm
- Height - Top of Hood 2616mm
- Height to Top of Radiator Guard 2405mm
- Ground Clearance to Hitch 365mm
- Ground Clearance to Transmission Guard 375mm
- Ground Clearance to Bottom of Bumper 665mm
- Centerline of Rear Axle to Bumper 1990mm
- Hitch to Centerline of Front Axle 1675mm
- Wheel Base 3350mm
- Width over Platform 3140mm
- Height to Top of GPS Antenna 3701mm
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
816K
Compactors
- Gross Power212kW
- Net Power185kW
- Engine ModelCat® C7.1: configured for two emissions options
836
Compactors
- Gross Power - SAE J1995:2014419kW
- Net Power - SAE J1349:2011370kW
- Net Power - ISO 9249:2007374kW
826
Compactors
- Gross Power - SAE J1995:2014324kW
- Net Power - SAE J1349:2011302kW
- Net Power - ISO 9249:2007302kW
815K
Compactors
- Engine ModelCat® C7.1: configured for two emissions options
- Net Power185kW
- Bore105mm
815
Compactors
- Gross Power (SAE J1995:2014)212kW
- Net Power (SAE J1349:2011)186kW
- Net Power (ISO 9249:2007)186kW
CB68B
Compactors
- Standard - Operating Weight14180kg
- Standard Compaction Width2130mm
- Curb Clearance723mm
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
