NEW / / marine power systems / VM 32 C
VM 32 C marine power system
VM 32 C
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
VM 32 C
marine power systems
- Minimum Rating 5754 kWe (7200 kVA)
- Maximum Rating 7672 kWe (9600 kVA)
- Emissions Fuel Strategy EPA Tier 2 & IMO II
SPECIFICATIONS
- Minimum Rating 5754 kWe (7200 kVA)
- Maximum Rating 7672 kWe (9600 kVA)
- Emissions Fuel Strategy EPA Tier 2 & IMO II
- Bore 320 mm12.6 in
- Stroke 460 mm18.11 in
- Configuration 12,16 Cylinder
- Swept Volume 37 l/cyl2257.88 in³
- Length 10703 mm - 12149 mm (421.4 in - 478.3 in)
- Width 3526 mm ( 138.8 in)
- Height 4639 mm (182.6 in)
- Weight 120.0 t - 140.0 t (264554 lbs - 308647 lbs)
- Industry marine-power-systems
EQUIPMENT
VM 32 C Standard Equipment
- Air Inlet System
- Air intake silencer / filter
- Control System
- Load sharing unit (for multiple engine plant only)
- Protection system (external cabinet)
- Serial link interface (MODbus / canbus)
- Speed governor
- Cooling System
- Electric cooling water preheater
- HT cooling water pump (engine driven)
- 2-stage charge air cooler
- Exhaust System
- Exhaust gas expansion joint
- Exhaust gas insulated manifolds
- Turbocharger at counter-flywheel end
- Fuel System
- Fuel circulating pump (electric driven / for MDO/MGO only)
- Fuel indicator filter
- Fuel pressure valve (separate / for MDO/MGO only)
- Instrumentation
- Control push buttons and lamps
- Emergency stop lever
- Local control panel
- Pressure and temperature indicator
- Lube System
- Engine with dry sump
- Lube oil plate cooler (separate)
- Lube oil pump (engine driven)
- Lube oil safety filter
- Lube oil self-cleaning filter (separate)
- Oil sump in base frame
- Pre-lubricating oil pump (electric driven / fitted on base frame)
- Pressure regulating valve
- Mounting System
- Engine resiliently mounted on base frame, base frame mounted rigidly
- Flexible pipe connections
- High flexible coupling
- Starting System
- Electrical barring device
- Starting air valve
- General
- Engine, flexible coupling and generator mounted on a common base frame
- Flywheel cover
- Lifting device (rental)
- Torsional Vibration Calculation (TVC)
VM 32 C Optional Equipment
- Air Inlet System
- Air inlet shut-off valve
- Air intake transition piece
- Expansion joint
- Silencer / filter
- Control System
- Electronic speed governor
- Engine alarm system
- Remote indicators (start air pressure, engine speed, etc.)
- Starter for electric driven pumps
- 24 DC UPS
- Cooling System
- CW piping for generator cooling on base frame
- CW piping for lubricating oil cooler on base frame
- FW/SW plate cooler
- HT cooling water pump (electric driven)
- LT cooling water pump (electric driven)
- Sea water cooling pump (electric driven)
- Temperature control valve
- Exhaust System
- Silencer (with or without spark arrester)
- Fuel System
- Fuel oil cooler
- HFO final preheater
- HFO pressure regulating valve
- HFO self-cleaning automatic filter
- HFO supply and booster pumps (electric driven)
- HFO treatment and supply modules
- HFO viscosity control device
- Mixing tank
- Lube System
- Lube oil centrifuge
- Lube oil pump (electric driven)
- Lube oil treatment and combined modules
- Temperature control valve
- Mounting System
- Resilient mounting on base frame
- Starting System
- Starting air compressor
- Starting air receiver
- General
- Generator customer supply
360° INTERACTIVE
