NEW / / marine power systems / M 20 C
M 20 C marine power system
M 20 C
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
M 20 C
marine power systems
- Minimum Rating 979 kWe (1224 kVA)
- Maximum Rating 1726 kWe (2160 kVA)
- Emissions Fuel Strategy IMO II
SPECIFICATIONS
- Minimum Rating 979 kWe (1224 kVA)
- Maximum Rating 1726 kWe (2160 kVA)
- Emissions Fuel Strategy IMO II
- Bore 200 mm7.87 in
- Stroke 300 mm11.81 in
- Configuration 6,8,9 Cylinder
- Swept Volume 9.4 l/cyl573.62 in³
- Length 6073 mm - 7125 mm (239.1 in - 280.5 in)
- Width 1680 mm - 1816 mm ( 66.1 in - 71.5 in)
- Height 2833 mm - 3010 mm (111.5 in - 118.5 in)
- Weight 18.8 t - 30.0 t (41447 lbs - 66139 lbs)
- Industry marine-power-systems
EQUIPMENT
M 20 C Standard Equipment
- Air Inlet System
- Air intake silencer / filter
- Control System
- Load Sharing Unit (for multiple engine plant only)
- Protection System
- Serial Link Interface (MODbus RTU / canbus)
- Speed governor
- Cooling System
- Charge air cooler
- Electric cooling water preheater (fitted on base frame)
- HT cooling water pump (engine driven)
- LT cooling water pump (engine driven)
- Exhaust System
- Exhaust gas expansion joint
- Exhaust gas insulated manifolds
- Turbocharger at counter-flywheel side
- Fuel System
- Fuel circulating pump (attached / for MDO/MGO only)
- Fuel indicator filter
- Fuel pressure valve (separate / for MDO/MGO only)
- Instrumentation
- Control push buttons and lamps
- Emergency stop lever
- Local control panel
- Pressure and temperature indicator
- Lube System
- Lube oil cooler
- Lube oil pump (engine driven)
- Lube oil self-cleaning filter
- Oil sump in base frame
- Pre-lubricating oil pump (electr. driven/fitted on base frame)
- Pressure regulating valve
- Mounting System
- Flexible pipe connections
- High flexible coupling
- Resilient mounting
- Starting System
- Air starting motor
- Manual barring device
- General
- Engine, flex. coupling and generator mounted on a common base frame
- Flywheel cover
- Lifting device (rental)
- Torsional Vibration Calculation (TVC)
M 20 C Optional Equipment
- Air Inlet System
- Air inlet shut-off valve
- Air intake transition piece
- Expansion joint
- Silencer / filter
- Control System
- Air injection control (for better load request)
- Electronic speed governor
- Engine alarm system
- Remote indicators (start air pressure, engine speed, etc.)
- Starter for electric driven pumps
- 24 DC UPS
- Cooling System
- FW/SW plate cooler
- HT cooling water pump (electric driven)
- LT cooling water pump (electric driven)
- Sea water cooling pump (electric driven)
- Temperature control valve
- Exhaust System
- Silencer (with or without spark arrester)
- Fuel System
- Fuel oil cooler
- HFO final preheater
- HFO pressure regulating valve
- HFO self-cleaning automatic filter
- HFO supply and booster pumps (electrical driven)
- HFO treatment and supply modules
- HFO viscosity control device
- Mixing tank
- Lube System
- Lube oil centrifuge
- Lube oil pump (electrical driven)
- Lube oil treatment and combined modules
- Mounting System
- Double resilient mounting
- Starting System
- Starting air compressor
- Starting air receiver
- General
- Engine PTO coupling
- Generator customer supply
- PTO shaft on counter-flywheel side
360° INTERACTIVE
