CX48-P2300 oil and ga

  • Length 1893.2 mm74.5 in
  • Width 1128 mm44.4 in
  • Height 1049 mm41.3 in

SPECIFICATIONS

  • Length 1893.2 mm74.5 in
  • Width 1128 mm44.4 in
  • Height 1049 mm41.3 in
  • Weight 1757 kg3873 lb
  • Gross Input Power 1715 bkW2300 BHP
  • Gross Peak Input Torque 9024 N·m6656 ft-lb
  • Rated Input Speed 1900 r/min1900 r/min
  • Gear Type Straight Planetary Spur
  • Gears 8F/0R
  • 1 F Gear Ration 3.34
  • 2 F Gear Ration 2.45
  • 3 F Gear Ration 2.20
  • 4 F Gear Ration 1.81
  • 5 F Gear Ration 1.62
  • 6 F Gear Ration 1.36
  • 7 F Gear Ration 1.19
  • 8 F Gear Ration 1.00
  • Industry oil-and-gas

EQUIPMENT

CX48-P2300 Standard Equipment

  • Cat Engines for Optimized Power Train
    • Cat 3512B
    • Cat 3512C
    • Cummins QSK45
    • Cummins QSK50
    • MTU 12V4000
  • Transmission Rotation
    • Input rotation — counterclockwise
    • Output rotation — counterclockwise (as viewed from rear)
  • Torque Converter
    • Integral torque converter
    • Series - TC58927-ESLF
    • Stall torque ratio - 2.20
  • Clutches
    • Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
    • Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
  • Installation Connections
    • 2 oil cooler lines
    • 1 electrical connector
  • Oil System
    • Cat Transmission/Drive Train Oil-4 (TDTO)
    • Sump oil temperatures
    • Hydraulic Fill Capacity — Approx. 108 L (28.5 gal), 125 L (33 gal) initial fill; subject to cooler size, lines, and installation
    • Filter Type — 6 micron synthetic, cartridge remote mount
  • Mountings
    • Input connection (flywheel) — SAE #0
    • Output connections (yoke) — GWB 390.60/GWB 390.65
    • Structural application subject to Caterpillar approval
  • Control System
    • Electronic Control Unit (ECU)
    • Electronic data link, SAE J1939
    • Electrical system 24V
  • Power Take-Off Drives
    • Location
    • Mounting type: J744 SAE C
    • Rated power
    • Rotation: Clockwise as installed on SAE C pad
    • Ratio, 1.216:1

CX48-P2300 Optional Equipment

  • Integral Power Take-Off
    • Location: 12 o'clock
    • Mounting type: J704 SAE 8 bolt
    • Rated power
    • Rotation:
    • Ratio - 1.088:1

360° INTERACTIVE

Exterior

Interior

RELATED PRODUCTS

CN1566 Electric Motor - Oil-and-gas

CN1566 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 1189 r/min1189 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3086 Electric Motor for Gas Compression - Oil-and-gas

CN3086 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 892 r/min892 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3586 Electric Motor for Gas Compression - Oil-and-gas

CN3586 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 rpm
  • Mounting Designation: F1 or F2
Get a quote
CN5086 Electric Motor - Oil-and-gas

CN5086 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 r/min894 r/min
  • Mounting Designation: F1 or F2
Get a quote
3406C - Oil-and-gas

3406C

oil and gas

  • Minimum Rating: 217 bkW292 BHP
  • Maximum Rating: 359 bkW482 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3412 - Oil-and-gas

3412

oil and gas

  • Minimum Rating: 476 bkW638 BHP
  • Maximum Rating: 551 bkW739 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3508 - Oil-and-gas

3508

oil and gas

  • Minimum Rating: 709 bkW950 BHP
  • Maximum Rating: 795 bkW1065 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3512 - Oil-and-gas

3512

oil and gas

  • Minimum Rating: 1066 bkW1430 BHP
  • Maximum Rating: 1195 bkW1600 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3516 - Oil-and-gas

3516

oil and gas

  • Minimum Rating: 1417 bkW1900 BHP
  • Maximum Rating: 1480 bkW1985 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
Get a quote