NEW / / oil and gas / 3412
3412
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Minimum Rating 476 bkW638 BHP
- Maximum Rating 551 bkW739 BHP
- Aspiration Turbocharged Aftercooled
SPECIFICATIONS
- Minimum Rating 476 bkW638 BHP
- Maximum Rating 551 bkW739 BHP
- Aspiration Turbocharged Aftercooled
- Bore 137 mm5.4 in
- Displacement 27 l1650 in³
- Stroke 152 mm6 in
- Length 1980 mm78 in
- Width 1300 mm51.2 in
- Height 1285 mm50.6 in
- Emissions Non-certified
- Engine Weight Net Dry 2730 kg6018 lb
- Oil Change Interval 250 h250 h
- Rotation From Flywheel End Counterclockwise
- Flywheel And Flywheel Housing SAE No. 0
- Flywheel Teeth 151
- Lube Oil System Refill 139 l36.8 gal (US)
- Cooling System Engine 58 l15.5 gal (US)
- Industry oil-and-gas
EQUIPMENT
3412 Standard Equipment
- Air Inlet System
- Air cleaner, regular duty with service indicators
- Turbocharged
- Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
- Heat exchanger installed
- Expansion tank
- Control System
- Charging alternator 24 volt, 35 amp
- Governor control
- Hydra-mechanical governor
- Exhaust System
- Exhaust manifold
- Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
- Flywheels & Flywheel Housings
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter
- Fuel transfer pump
- Primary fuel filter
- Fuel priming pump
- Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Tachometer
- Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler in valve cover and dipstick, both RH
- Lube oil filter
- Rear sump oil pan
- Power Take Off
- Power take-off (PTO) flywheel stub shaft
- Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- Starting System
- 24 volt, LH electric starting motor
- Jacket water heater (6 kW, 240-480 volt)
- General
- Paint: Firepump Red
- Vibration damper and guard
- Lifting eyes
360° INTERACTIVE
SPECIFICATIONS
- Minimum Rating 476 bkW638 BHP
- Maximum Rating 551 bkW739 BHP
- Aspiration Turbocharged Aftercooled
- Bore 137 mm5.4 in
- Displacement 27 l1650 in³
- Stroke 152 mm6 in
- Length 1980 mm78 in
- Width 1300 mm51.2 in
- Height 1285 mm50.6 in
- Emissions Non-certified
- Engine Weight Net Dry 2730 kg6018 lb
- Oil Change Interval 250 h250 h
- Rotation From Flywheel End Counterclockwise
- Flywheel And Flywheel Housing SAE No. 0
- Flywheel Teeth 151
- Lube Oil System Refill 139 l36.8 gal (US)
- Cooling System Engine 58 l15.5 gal (US)
- Industry oil-and-gas
EQUIPMENT
3412 Standard Equipment
- Air Inlet System
- Air cleaner, regular duty with service indicators
- Turbocharged
- Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
- Heat exchanger installed
- Expansion tank
- Control System
- Charging alternator 24 volt, 35 amp
- Governor control
- Hydra-mechanical governor
- Exhaust System
- Exhaust manifold
- Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.
- Flywheels & Flywheel Housings
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter
- Fuel transfer pump
- Primary fuel filter
- Fuel priming pump
- Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Tachometer
- Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler in valve cover and dipstick, both RH
- Lube oil filter
- Rear sump oil pan
- Power Take Off
- Power take-off (PTO) flywheel stub shaft
- Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- Starting System
- 24 volt, LH electric starting motor
- Jacket water heater (6 kW, 240-480 volt)
- General
- Paint: Firepump Red
- Vibration damper and guard
- Lifting eyes
RELATED PRODUCTS
CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 1189 r/min1189 r/min
- Mounting Designation: F1 or F2
CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 892 r/min892 r/min
- Mounting Designation: F1 or F2
CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 rpm
- Mounting Designation: F1 or F2
CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 r/min894 r/min
- Mounting Designation: F1 or F2
3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
- Maximum Rating: 359 bkW482 BHP
- Aspiration: Turbocharged Aftercooled
3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
- Maximum Rating: 551 bkW739 BHP
- Aspiration: Turbocharged Aftercooled
3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
- Maximum Rating: 795 bkW1065 BHP
- Aspiration: Turbocharged Aftercooled
3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
- Maximum Rating: 1195 bkW1600 BHP
- Aspiration: Turbocharged Aftercooled
3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
- Maximum Rating: 1480 bkW1985 BHP
- Aspiration: Turbocharged Aftercooled
