C9 ACERT™ (Water-Cooled Manifold)

NEW / / oil and gas / C9 ACERT™ (Water-Cooled Manifold)

C9 ACERT™ (Water-Cooled Manifold) oil and ga

C9 ACERT™ (Water-Cooled Manifold)

SPECIFICATIONS

EQUIPMENT

RELATED PRODUCTS

C9 ACERT™ (Water-Cooled Manifold)

oil and gas

Minimum Rating 243 bkW325 BHP
Maximum Rating 254 bkW340 BHP
Aspiration Turbocharged-Aftercooled

Get a quote

OVERVIEW

SPECIFICATIONS

Minimum Rating 243 bkW325 BHP
Maximum Rating 254 bkW340 BHP
Aspiration Turbocharged-Aftercooled
Bore 112 mm4.4 in
Displacement 8.8 l538 in³
Stroke 149 mm5.9 in
Length 1125 mm44.4 in
Width 892 mm35.1 in
Height 1052 mm41.4 in
Emissions EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
Rotation From Flywheel End Counterclockwise
Flywheel And Flywheel Housing SAE 1 or 2
Flywheel Teeth 113 (SAE 1), 134 (SAE 2)
Lube Oil System Refill 30.3 l8 gal (US)
Cooling System 13.9 l3.7 gal (US)
Governor And Protection Electronic (ADEM™ A4)
Weight 836 kg1844 lb
Industry oil-and-gas

EQUIPMENT

C9 ACERT™ (Water-Cooled Manifold) Standard Equipment

Air Inlet System
- Turbocharger, separate circuit (SCAC) or remote (REMAC)aftercooler
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Air inlet 101.6 mm (4 in) connection type

Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Fuel cooled ECU
- Power compensation for fuel temperature
- Programmable low and high idle
- Electronic diagnostics and fault logging
- Programmable monitoring system (engine speed, temperature,pressure)
- J1939 broadcast (diagnostic and engine status)
- Certified electrical control system (hazardous environment only)
- Derated engine: automatic ambient temperature compensation

Cooling System
- Thermostats and housing, RH forward-facing outlet — 51 mm(2.01 in) connection
- Jacket water pump — belt-driven, centrifugal
- Water pump — inlet RH facing downward 63 mm (2.48 in)

Exhaust System
- Exhaust manifold — water-cooled
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Rear facing turbo exhaust 81.8 mm (3.22 in) connection, nonV-band clamp

Flywheels and Flywheel Housing
- Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation

Fuel System
- HEUI fuel system
- Fuel filter — secondary, LH (2-micron high performance)
- Fuel transfer pump — left front
- Fuel priming pump — left front

Lube System
- Crankcase breather — LH
- Crankcase fumes disposal — with integrated service indicator, LH
- Oil cooler — RH
- Oil filter — RH
- Oil pan — front sump
- Oil filler — top mounted
- Oil level gauge — LH side
- Oil pump — gear-driven
- Oil valve sampling
- Preservation of turbocharger, flywheel, and crankcase

Power Take-Offs
- Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter,22.3 mm (7/8 in) wide

General
- Vibration damper
- Lifting eyes
- Automatic variable timing — electronic
- Literature

Mandatory Options
- Flywheel housing and flywheel
- Throttle position sensor and/or throttle control
- (Non-hazardous environment only)
- Primary filter/water separator
- Turbo orientation

C9 ACERT™ (Water-Cooled Manifold) Optional Equipment

Air Compressors
- Air compressors
- Air compressor governor

Air Inlet System
- Air cleaner
- Precleaner
- Air inlet elbow
- Air shutoffs

Charging Systems
- Charging alternators
- Alternator mounting
- Alternator belt tensioner
- Alternator pulleys
- Alternator guards

Cooling System
- Radiators
- Fan drive and pulley — f/u/w radiator packages
- Fans f/u/w radiator packages
- Coolant level sensor
- Fan drive mountings
- Fan adapters
- Fan adapter for blower fans
- Fan pulleys
- Fan height instructions
- Vee belts for customer-supplied radiators
- Suction fans and blower fans
- Water inlet elbows
- Dry charge coolant conditioners

Emissions Certifications
- IMO certification

Exhaust System
- Flexible fitting
- Turbocharger exhaust outlet adapters
- Elbows, flange, pipes, clamp
- Rain caps
- Manifolds
- Mufflers

Flywheels and Flywheel Housing
- Crankshaft seal

Fuel System
- Flexible fuel lines
- Water separator and fuel filters
- Fuel cooler

Instrumentation
- Gauges and instrument panels
- Interconnect harness
- Voltmeters
- Gauge mounting
- Ammeter

Lube System
- Oil pans
- Drain and cover
- Oil level gauges
- Remote oil filter
- Oil fillers
- Lubricating oil
- Fumes disposal

Mounting System
- Structural steel base
- Engine support — front and rear

Power Take-Offs
- Enclosed clutch
- Clutch supports
- Flywheel stub shaft
- Hydraulic pump drives
- Hydraulic gear pumps

Starting System
- Starting aids
- Electric starting motors — 12V and 24V
- Battery sets — 12V and 24V (dry)
- Battery cable

General
- Tool set

360° INTERACTIVE

SPECIFICATIONS

Minimum Rating 243 bkW325 BHP
Maximum Rating 254 bkW340 BHP
Aspiration Turbocharged-Aftercooled
Bore 112 mm4.4 in
Displacement 8.8 l538 in³
Stroke 149 mm5.9 in
Length 1125 mm44.4 in
Width 892 mm35.1 in
Height 1052 mm41.4 in
Emissions EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
Rotation From Flywheel End Counterclockwise
Flywheel And Flywheel Housing SAE 1 or 2
Flywheel Teeth 113 (SAE 1), 134 (SAE 2)
Lube Oil System Refill 30.3 l8 gal (US)
Cooling System 13.9 l3.7 gal (US)
Governor And Protection Electronic (ADEM™ A4)
Weight 836 kg1844 lb
Industry oil-and-gas

EQUIPMENT

C9 ACERT™ (Water-Cooled Manifold) Standard Equipment

Air Inlet System
- Turbocharger, separate circuit (SCAC) or remote (REMAC)aftercooler
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Air inlet 101.6 mm (4 in) connection type

Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Fuel cooled ECU
- Power compensation for fuel temperature
- Programmable low and high idle
- Electronic diagnostics and fault logging
- Programmable monitoring system (engine speed, temperature,pressure)
- J1939 broadcast (diagnostic and engine status)
- Certified electrical control system (hazardous environment only)
- Derated engine: automatic ambient temperature compensation

Cooling System
- Thermostats and housing, RH forward-facing outlet — 51 mm(2.01 in) connection
- Jacket water pump — belt-driven, centrifugal
- Water pump — inlet RH facing downward 63 mm (2.48 in)

Exhaust System
- Exhaust manifold — water-cooled
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Rear facing turbo exhaust 81.8 mm (3.22 in) connection, nonV-band clamp

Flywheels and Flywheel Housing
- Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation

Fuel System
- HEUI fuel system
- Fuel filter — secondary, LH (2-micron high performance)
- Fuel transfer pump — left front
- Fuel priming pump — left front

Lube System
- Crankcase breather — LH
- Crankcase fumes disposal — with integrated service indicator, LH
- Oil cooler — RH
- Oil filter — RH
- Oil pan — front sump
- Oil filler — top mounted
- Oil level gauge — LH side
- Oil pump — gear-driven
- Oil valve sampling
- Preservation of turbocharger, flywheel, and crankcase

Power Take-Offs
- Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter,22.3 mm (7/8 in) wide

General
- Vibration damper
- Lifting eyes
- Automatic variable timing — electronic
- Literature

Mandatory Options
- Flywheel housing and flywheel
- Throttle position sensor and/or throttle control
- (Non-hazardous environment only)
- Primary filter/water separator
- Turbo orientation

C9 ACERT™ (Water-Cooled Manifold) Optional Equipment

Air Compressors
- Air compressors
- Air compressor governor

Air Inlet System
- Air cleaner
- Precleaner
- Air inlet elbow
- Air shutoffs

Charging Systems
- Charging alternators
- Alternator mounting
- Alternator belt tensioner
- Alternator pulleys
- Alternator guards

Cooling System
- Radiators
- Fan drive and pulley — f/u/w radiator packages
- Fans f/u/w radiator packages
- Coolant level sensor
- Fan drive mountings
- Fan adapters
- Fan adapter for blower fans
- Fan pulleys
- Fan height instructions
- Vee belts for customer-supplied radiators
- Suction fans and blower fans
- Water inlet elbows
- Dry charge coolant conditioners

Emissions Certifications
- IMO certification

Exhaust System
- Flexible fitting
- Turbocharger exhaust outlet adapters
- Elbows, flange, pipes, clamp
- Rain caps
- Manifolds
- Mufflers

Flywheels and Flywheel Housing
- Crankshaft seal

Fuel System
- Flexible fuel lines
- Water separator and fuel filters
- Fuel cooler

Instrumentation
- Gauges and instrument panels
- Interconnect harness
- Voltmeters
- Gauge mounting
- Ammeter

Lube System
- Oil pans
- Drain and cover
- Oil level gauges
- Remote oil filter
- Oil fillers
- Lubricating oil
- Fumes disposal

Mounting System
- Structural steel base
- Engine support — front and rear

Power Take-Offs
- Enclosed clutch
- Clutch supports
- Flywheel stub shaft
- Hydraulic pump drives
- Hydraulic gear pumps

Starting System
- Starting aids
- Electric starting motors — 12V and 24V
- Battery sets — 12V and 24V (dry)
- Battery cable

General
- Tool set

RELATED PRODUCTS

CN1566 Electric Motor

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 1189 r/min1189 r/min
Mounting Designation: F1 or F2

Get a quote

CN3086 Electric Motor for Gas Compression

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 892 r/min892 r/min
Mounting Designation: F1 or F2

Get a quote

CN3586 Electric Motor for Gas Compression

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 894 rpm
Mounting Designation: F1 or F2

Get a quote

CN5086 Electric Motor

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 894 r/min894 r/min
Mounting Designation: F1 or F2

Get a quote

3406C

oil and gas

Minimum Rating: 217 bkW292 BHP
Maximum Rating: 359 bkW482 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3412

oil and gas

Minimum Rating: 476 bkW638 BHP
Maximum Rating: 551 bkW739 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3508

oil and gas

Minimum Rating: 709 bkW950 BHP
Maximum Rating: 795 bkW1065 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3512

oil and gas

Minimum Rating: 1066 bkW1430 BHP
Maximum Rating: 1195 bkW1600 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3516

oil and gas

Minimum Rating: 1417 bkW1900 BHP
Maximum Rating: 1480 bkW1985 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

Enquiry Basket Summary

C9 ACERT™ (Water-Cooled Manifold)

SPECIFICATIONS

EQUIPMENT

RELATED PRODUCTS

C9 ACERT™ (Water-Cooled Manifold)

OVERVIEW

SPECIFICATIONS

EQUIPMENT

C9 ACERT™ (Water-Cooled Manifold) Standard Equipment

C9 ACERT™ (Water-Cooled Manifold) Optional Equipment

360° INTERACTIVE

RELATED PRODUCTS

CN1566 Electric Motor

CN3086 Electric Motor for Gas Compression

CN3586 Electric Motor for Gas Compression

CN5086 Electric Motor

3406C

3412

3508

3512

3516

SPECIFICATIONS

EQUIPMENT

C9 ACERT™ (Water-Cooled Manifold) Standard Equipment

C9 ACERT™ (Water-Cooled Manifold) Optional Equipment

RELATED PRODUCTS

CN1566 Electric Motor

CN3086 Electric Motor for Gas Compression

CN3586 Electric Motor for Gas Compression

CN5086 Electric Motor

3406C

3412

3508

3512

3516