NEW / / marine power systems / C7.1
C7.1
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
C7.1
marine power systems
- Aspiration Turbocharged, aftercooled
- Bore 105 mm4.13 in
- Displacement 7.01 l427.16 in³
SPECIFICATIONS
- Aspiration Turbocharged, aftercooled
- Bore 105 mm4.13 in
- Displacement 7.01 l427.16 in³
- Stroke 135 mm5.31 in
- Configuration In-line 6, 4-Stroke-Cycle Diesel
- Height 876 mm34.5 in
- Emissions EPA Tier 3 Recreational, IMO II, RCD 2016
- Rotation From Flywheel End Counterclockwise
- Power Range 298 bkW - 373 bkW (400 bhp - 500 bhp)
- Engine Dry Weight Approximate 750 kg1653 lb
- Length Engine 1394 mm54.9 in
- Width Engine 798 mm31.4 in
- Speed Range 2900 rpm
- Industry marine-power-systems
EQUIPMENT
C7.1 Standard Equipment
- AIR INLET SYSTEM
- Air cleaner/fumes disposal (closed system)
- Turbochargers, jacket water cooled
- Aftercooler condensate drain
- CONTROL SYSTEM
- Cold mode start strategy
- PWM secondary throttle
- Cold mode start strategy
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- Three types of throttle inputs (CAN, PWM, and 0-5V)
- 70-pin customer connector
- COOLING SYSTEM
- Sea water pump, gear driven, for HEX cooled engines only
- Sea water aftercooled
- Jacket water pump, gear driven
- JW Heat Exchanger - Corrosion resistant shell and tube style
- Fuel cooler
- Expansion tank
- Thermostat housing
- 63mm hose bead raw water inlet
- 50 mm hose bead raw water oulet
- Integrated gear oil cooler
- EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 90mm ID round flanged exhaust outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 3 - With M10 Threads
- Flywheel, SAE 11 1/2, with 3/8 UNF threads
- SAE standard rotation
- FUEL SYSTEM
- High Pressure Common Rail fuel system
- High pressure fuel system pump with integral low pressure fuel transfer pump
- Primary fuel filter, remote mounted
- Secondary fuel filter, LH top service location
- LUBE SYSTEM
- Crankcase breather, closed crankcase ventilation
- Oil filter, LH top service location
- Oil cooler
- Oil pan, center sump
- Oil pump, gear driven
- Dipstick, RH service on Port, LH service on Starboard
- MOUNTING SYSTEM
- Front and rear support brackets
- GENERAL
- Front belt and damper guard
- Lifting eyes
- Upper front-facing customer wiring connector and Service Tool connection
- PROTECTION SYSTEM
- Electronic Engine Monitoring System provides engine de-rate strategies to protect against adverse operating conditions
- PAINTS
- Engines are painted Matterhorn white with pleasure craft finish includes epoxy primer with polyurethane topcoat. Fuel lines, water lines and clamps and wiring harness will be unpainted. Standard decals and informational films will be installed. Shipped loose parts will be shipped as received from suppliers. Heat sensitive components have a textured black finish.
C7.1 Optional Equipment
- MOUNTING SYSTEM
- Vibration isolation mounting
360° INTERACTIVE
SPECIFICATIONS
- Aspiration Turbocharged, aftercooled
- Bore 105 mm4.13 in
- Displacement 7.01 l427.16 in³
- Stroke 135 mm5.31 in
- Configuration In-line 6, 4-Stroke-Cycle Diesel
- Height 876 mm34.5 in
- Emissions EPA Tier 3 Recreational, IMO II, RCD 2016
- Rotation From Flywheel End Counterclockwise
- Power Range 298 bkW - 373 bkW (400 bhp - 500 bhp)
- Engine Dry Weight Approximate 750 kg1653 lb
- Length Engine 1394 mm54.9 in
- Width Engine 798 mm31.4 in
- Speed Range 2900 rpm
- Industry marine-power-systems
EQUIPMENT
C7.1 Standard Equipment
- AIR INLET SYSTEM
- Air cleaner/fumes disposal (closed system)
- Turbochargers, jacket water cooled
- Aftercooler condensate drain
- CONTROL SYSTEM
- Cold mode start strategy
- PWM secondary throttle
- Cold mode start strategy
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- Three types of throttle inputs (CAN, PWM, and 0-5V)
- 70-pin customer connector
- COOLING SYSTEM
- Sea water pump, gear driven, for HEX cooled engines only
- Sea water aftercooled
- Jacket water pump, gear driven
- JW Heat Exchanger - Corrosion resistant shell and tube style
- Fuel cooler
- Expansion tank
- Thermostat housing
- 63mm hose bead raw water inlet
- 50 mm hose bead raw water oulet
- Integrated gear oil cooler
- EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 90mm ID round flanged exhaust outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 3 - With M10 Threads
- Flywheel, SAE 11 1/2, with 3/8 UNF threads
- SAE standard rotation
- FUEL SYSTEM
- High Pressure Common Rail fuel system
- High pressure fuel system pump with integral low pressure fuel transfer pump
- Primary fuel filter, remote mounted
- Secondary fuel filter, LH top service location
- LUBE SYSTEM
- Crankcase breather, closed crankcase ventilation
- Oil filter, LH top service location
- Oil cooler
- Oil pan, center sump
- Oil pump, gear driven
- Dipstick, RH service on Port, LH service on Starboard
- MOUNTING SYSTEM
- Front and rear support brackets
- GENERAL
- Front belt and damper guard
- Lifting eyes
- Upper front-facing customer wiring connector and Service Tool connection
- PROTECTION SYSTEM
- Electronic Engine Monitoring System provides engine de-rate strategies to protect against adverse operating conditions
- PAINTS
- Engines are painted Matterhorn white with pleasure craft finish includes epoxy primer with polyurethane topcoat. Fuel lines, water lines and clamps and wiring harness will be unpainted. Standard decals and informational films will be installed. Shipped loose parts will be shipped as received from suppliers. Heat sensitive components have a textured black finish.
C7.1 Optional Equipment
- MOUNTING SYSTEM
- Vibration isolation mounting
RELATED PRODUCTS
3512E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 58.6 l3574 in³
3516E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 78 l4765 in³
C18 IMO II
marine power systems
- Minimum Rating: 301 bkW404 BHP
- Maximum Rating: 492 bkW660 BHP
- Aspiration: TA, TTA
C18 Tier 3
marine power systems
- Minimum Rating: 465 bkW624 BHP
- Maximum Rating: 599 bkW803 BHP
- Aspiration: TA, TTA
C280
marine power systems
- Minimum Rating: 1730 bkW2320 BHP
- Maximum Rating: 5420 bkW7268 BHP
- Aspiration: TA
C32 IMO II
marine power systems
- Minimum Rating: 590 bkW791 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 IMO III
marine power systems
- Minimum Rating: 262 bkW352 BHP
- Maximum Rating: 874 bkW1172 BHP
- Aspiration: Turbocharged-aftercooled aspiration
C32 Tier 3
marine power systems
- Minimum Rating: 781 bkW1047 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 Tier 3 / IMO II
marine power systems
- Minimum Rating: 234 bkW314 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: Turbocharged-aftercooled aspiration
