C7 ACERT™ (Dry Manifold) oil and ga

  • Minimum Rating 168 bkW225 BHP
  • Maximum Rating 223 bkW300 BHP
  • Aspiration Turbocharged-Aftercooled

SPECIFICATIONS

  • Minimum Rating 168 bkW225 BHP
  • Maximum Rating 223 bkW300 BHP
  • Aspiration Turbocharged-Aftercooled
  • Bore 110 mm4.3 in
  • Displacement 7.2 l441.8 in³
  • Stroke 127 mm5 in
  • Length 1052 mm41.4 in
  • Width 759 mm29.9 in
  • Height 1031 mm40.6 in
  • Emissions EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
  • Rotation From Flywheel End Counterclockwise
  • Flywheel And Flywheel Housing SAE 1, 2, or 3
  • Flywheel Teeth 156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
  • Lube Oil System Refill 18 l4.8 gal (US)
  • Governor And Protection Electronic (ADEM™ 3)
  • Weight 629 kg1386 lb
  • Industry oil-and-gas

EQUIPMENT

C7 ACERT™ (Dry Manifold) Standard Equipment

  • Air Inlet System
    • Turbocharger, air to air aftercooled
    • Air inlet, LH side facing front 79.0 mm (3.11 in) connection
  • Control System
    • Electronic governing, PTO speed control
    • Programmable rating
    • Cold mode start strategy
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and TEL
    • Electronic diagnostics and fault logging
    • Programmable monitoring system (engine speeds, temperature, pressure)
    • J1939 broadcast (diagnostic and engine status)
    • Automatic variable timing, electronic
    • All engines shipped at max rated rpm
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump — belt-driven, centrifugal
    • Water pump, inlet RH front vertical inlet (pointing down)
  • Exhaust System
    • Exhaust manifold — dry
    • Front turbo exhaust
  • Fuel System
    • Hydraulic Electronic Unit injection (HEUI)
    • Fuel filter — secondary, LH front (2-micron high performance)
    • Fuel transfer pump — LH front
    • Fuel priming pump — LH front
  • General
    • Vibration damper
    • Paint — Cat yellow
    • Lifting eyes
    • Electronic installation kit (connectors, pins, sockets)
  • Lube System
    • Crankcase breather, LH side
    • Oil cooler, RH
    • Oil filler, front top valve cover
    • Oil filter and sampling valve, RH
    • Oil pan, front sump, 31 L (33 qt) oil change capacity
    • Oil dipstick, LH rear
    • Engine oil pump (gear-driven)
    • Engine shipped without oil
  • Power Take-Offs
    • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide

C7 ACERT™ (Dry Manifold) Optional Equipment

  • Air Compressor
    • Air compressors
    • Air compressor governor
  • Air Inlet System
    • Air cleaners
    • Precleaner
    • Air inlet elbow
    • Air shutoffs
  • Charging Systems
    • Charging alternators
    • Alternator mountings
    • Alternator belt tensioner
    • Alternator pulleys
    • Alternator guards
  • Cooling System
    • Radiators
    • Fan drive and pulley - f/u/w radiator packages
    • Fans f/u/w radiator packages
    • Coolant level sensor
    • Fan drive mountings
    • Fan adapters
    • Fan adapter for blower fans
    • Fan pulleys
    • Fan height instructions
    • Vee belts for customer-supplied radiators
    • Suction fans and blower fans
    • Water inlet elbows
    • Dry charge coolant conditioners
  • Emissions Certification
    • IMO Certification
  • Exhaust System
    • Flexible fitting
    • Turbocharger exhaust outlet adapters
    • Elbows, flange, pipes, clamp
    • Rain caps
    • Manifolds
    • Mufflers
  • Flywheels and Flywheel Housing
    • Crankshaft seal
  • Fuel System
    • Flexible fuel lines
    • Water separator and fuel filters
    • Fuel cooler
  • General
    • Tool set
  • Instrumentation
    • Gauges and instrument panels
    • Interconnect harnesses
    • Voltmeters
    • Gauge mounting
    • Ammeter
  • Lube System
    • Oil pan
    • Drain and cover
    • Oil level gauges
    • Remote oil filter
    • Oil fillers
    • Lubricating oil
    • Fumes disposal
  • Mounting System
    • Structural steel base
    • Front engine support
    • Rear engine supports
  • Power Take-Offs
    • Enclosed clutch
    • Clutch supports
    • Flywheel stub shaft
    • Hydraulic pump drives
    • Hydraulic gear pumps
  • Starting System
    • Starting Aids
    • Electric Starting Motors — 12V and 24V
    • Battery Sets - 12V and 24V (dry)
    • Battery Cable

RELATED PRODUCTS

CN1566 Electric Motor - Oil-and-gas

CN1566 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 1189 r/min1189 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3086 Electric Motor for Gas Compression - Oil-and-gas

CN3086 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 892 r/min892 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3586 Electric Motor for Gas Compression - Oil-and-gas

CN3586 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 rpm
  • Mounting Designation: F1 or F2
Get a quote
CN5086 Electric Motor - Oil-and-gas

CN5086 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 r/min894 r/min
  • Mounting Designation: F1 or F2
Get a quote
3406C - Oil-and-gas

3406C

oil and gas

  • Minimum Rating: 217 bkW292 BHP
  • Maximum Rating: 359 bkW482 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3412 - Oil-and-gas

3412

oil and gas

  • Minimum Rating: 476 bkW638 BHP
  • Maximum Rating: 551 bkW739 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3508 - Oil-and-gas

3508

oil and gas

  • Minimum Rating: 709 bkW950 BHP
  • Maximum Rating: 795 bkW1065 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3512 - Oil-and-gas

3512

oil and gas

  • Minimum Rating: 1066 bkW1430 BHP
  • Maximum Rating: 1195 bkW1600 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3516 - Oil-and-gas

3516

oil and gas

  • Minimum Rating: 1417 bkW1900 BHP
  • Maximum Rating: 1480 bkW1985 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
Get a quote