NEW / / marine power systems / C32 IMO III
C32 IMO III marine power system
C32 IMO III
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
C32 IMO III
marine power systems
- Minimum Rating 219 ekW
- Maximum Rating 940 ekW
- Frequency 60hz
SPECIFICATIONS
- Minimum Rating 219 ekW
- Maximum Rating 940 ekW
- Frequency 60hz
- Aspiration Turbocharged-aftercooled aspiration
- Bore 145 mm5.71 in
- Displacement 32.1 l1959 in³
- Stroke 162 mm6.38 in
- Configuration Vee-12, 4-stroke-Cycle-Diesel
- Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
- Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
- Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
- Emissions IMO III emissions certified (SCR required)
- Oil Change Interval 750 hrs
- Governor Electronic (A5 ECM)
- Generator SR5 - Form Wound
- Cooling Heat exchanger, keel or radiator cooled
- Rated Engine Speed 1500 rpm
- Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Industry marine-power-systems
EQUIPMENT
C32 IMO III Standard Equipment
- AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
- COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- FUEL SYSTEM
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
- GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
- LUBE SYSTEM
- Oil fill, simplex filter and dipstick
- MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
- GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
C32 IMO III Optional Equipment
- ALARM AND PROTECTION
- MGCPIIIB control panel with Cat® Alarm and Protection System
- IP44 generator protection
- EXHAUST SYSTEM
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
- FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
- STARTING SYSTEM
- Starting motors – air, electric or redundant
360° INTERACTIVE
SPECIFICATIONS
- Minimum Rating 219 ekW
- Maximum Rating 940 ekW
- Frequency 60hz
- Aspiration Turbocharged-aftercooled aspiration
- Bore 145 mm5.71 in
- Displacement 32.1 l1959 in³
- Stroke 162 mm6.38 in
- Configuration Vee-12, 4-stroke-Cycle-Diesel
- Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
- Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
- Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
- Emissions IMO III emissions certified (SCR required)
- Oil Change Interval 750 hrs
- Governor Electronic (A5 ECM)
- Generator SR5 - Form Wound
- Cooling Heat exchanger, keel or radiator cooled
- Rated Engine Speed 1500 rpm
- Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
- Industry marine-power-systems
EQUIPMENT
C32 IMO III Standard Equipment
- AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
- COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- FUEL SYSTEM
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
- GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
- LUBE SYSTEM
- Oil fill, simplex filter and dipstick
- MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
- GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
C32 IMO III Optional Equipment
- ALARM AND PROTECTION
- MGCPIIIB control panel with Cat® Alarm and Protection System
- IP44 generator protection
- EXHAUST SYSTEM
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
- FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
- STARTING SYSTEM
- Starting motors – air, electric or redundant
RELATED PRODUCTS
3512E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 58.6 l3574 in³
3516E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 78 l4765 in³
C18 IMO II
marine power systems
- Minimum Rating: 301 bkW404 BHP
- Maximum Rating: 492 bkW660 BHP
- Aspiration: TA, TTA
C18 Tier 3
marine power systems
- Minimum Rating: 465 bkW624 BHP
- Maximum Rating: 599 bkW803 BHP
- Aspiration: TA, TTA
C280
marine power systems
- Minimum Rating: 1730 bkW2320 BHP
- Maximum Rating: 5420 bkW7268 BHP
- Aspiration: TA
C32 IMO II
marine power systems
- Minimum Rating: 590 bkW791 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 IMO III
marine power systems
- Minimum Rating: 262 bkW352 BHP
- Maximum Rating: 874 bkW1172 BHP
- Aspiration: Turbocharged-aftercooled aspiration
C32 Tier 3
marine power systems
- Minimum Rating: 781 bkW1047 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 Tier 3 / IMO II
marine power systems
- Minimum Rating: 234 bkW314 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: Turbocharged-aftercooled aspiration
Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER SYSTEMS
INDUSTRIAL
OIL AND GAS
