SPECIFICATIONS
- Minimum Rating 730 ekW (913 kVA)
- Maximum Rating 940 ekW (1175 kVA)
- Frequency 60hz
- Speed 1800 rpm
- Emissions Fuel Strategy EPA Tier III
- Engine Model Vee-12, 4-stroke-Cycle-Diesel
- Aspiration Turbocharged and aftercooled
- Governor Type Electronic
- Fuel System MEUI
- Bore 145 mm5.7 in
- Displacement 32.1 l1959 in³
- Stroke 162 mm6.38 in
- Length 162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum)
- Width 1528 mm60.2 in
- Height 1667 mm65.6 in
- Number Of Poles 4
- Insulation Class H
- Weight Estimated 7131 kg15721 lb
- Excitation Permanent magnet
- Ip Rating 23
- Voltage Regulator CDVR
- Number Of Leads 6
- Number Of Bearings 2 roller bearings
- Industry marine-power-systems
EQUIPMENT
C32 ACERT Tier 3 Standard Equipment
- AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
- CONTROL SYSTEM
- If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
- Electronic diagnostics and fault logging
- Engine Protection Mode for extended ambient conditions
- Electronic fuel/air ratio control
- COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
- 4 Bolt ANSI Flange Connection
- Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
- EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
- FUEL SYSTEM
- Duplex Fuel Filters, Spin-on, RH service
- Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- GENERATORS AND GENERATOR ATTACHMENTS
- SR5 form wound
- 2 roller bearings
- Permanent magnet excitation
- 4 pole, 6 leads, Series Star connected
- Caterpillar's Digital Voltage Regulator (CDVR)
- Marine Class H insulation, Class F temperature rise
- Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
- Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
- IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
- System IV insulation for harsh environment protection
- LUBE SYSTEM
- Simplex oil filters, RH service
- Deep sump oil pan
- RH service oil filler locations
- RH service dipstick
- Oil pump, gear driven
- MOUNTING SYSTEM
- Formed C-channel rails, 300mm (11.81in) height
- Six shipped loose combined helical spring/rubber
- isolators for installation below package base
- GENERAL
- Front Damper guard
- Common electrical bondng point on HEX and KEEL cooled engines
C32 ACERT Tier 3 Optional Equipment
- ALARM AND PROTECTION
- Remote panels
- MCS Controller
- Power analyzer module
- Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors
- EXHAUST SYSTEM
- Dry Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- Rain Cap
- AIR INLET SYSTEM
- Air Inlet Cleaner
- Closed Crankcase Ventilation
- Air inlet adapter
- CHARGING SYSTEM
- Battery Chargers, Charging Alternators
- LUBE SYSTEM
- Duplex Oil Filters, Sump Pump
- STARTING SYSTEM
- Electric Starting Motors - Single 24 Volt
- Air Starting Motor
- Dual Starting Motors (Electric and Air)
- Air Start Accessories
- Starting Aids - JW Heaters
- Battery Sets - 24 Volt - Dry
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
3512E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 58.6 l3574 in³
3516E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 78 l4765 in³
C18 IMO II
marine power systems
- Minimum Rating: 301 bkW404 BHP
- Maximum Rating: 492 bkW660 BHP
- Aspiration: TA, TTA
C18 Tier 3
marine power systems
- Minimum Rating: 465 bkW624 BHP
- Maximum Rating: 599 bkW803 BHP
- Aspiration: TA, TTA
C280
marine power systems
- Minimum Rating: 1730 bkW2320 BHP
- Maximum Rating: 5420 bkW7268 BHP
- Aspiration: TA
C32 IMO II
marine power systems
- Minimum Rating: 590 bkW791 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 IMO III
marine power systems
- Minimum Rating: 262 bkW352 BHP
- Maximum Rating: 874 bkW1172 BHP
- Aspiration: Turbocharged-aftercooled aspiration
C32 Tier 3
marine power systems
- Minimum Rating: 781 bkW1047 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 Tier 3 / IMO II
marine power systems
- Minimum Rating: 234 bkW314 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: Turbocharged-aftercooled aspiration
