SPECIFICATIONS
- Minimum Rating 597 bkW800 BHP
- Maximum Rating 858 bkW1150 BHP
- Aspiration Turbocharged-Aftercooled
- Bore 137.7 mm5.4 in
- Displacement 27.2 l1658 in³
- Stroke 152.4 mm6 in
- Length 1918 mm75.5 in
- Width 1463 mm57.6 in
- Height 1321 mm52 in
- Emissions U.S. EPA Non-road Tier 2
- Engine Weight Net Dry 2895 kg6382 lb
- Oil Change Interval 250
- Rotation From Flywheel End Counterclockwise
- Flywheel And Flywheel Housing SAE No. 0 or SAE No. 1
- Flywheel Teeth 136 (SAE 0), 113 (SAE 1)
- Rated Speed 1800 r/min2100 r/min
- Governor And Protection ADEM A3
- Minimum Cooling System Engine Only 54.9 l14.5 gal (US)
- Industry oil-and-gas
EQUIPMENT
C27 ACERT™ Standard Equipment
- Air Inlet System
- Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
- Cooling System
- Thermostats and housing — outlet LH vertical orientation
- Jacket water pump — gear-driven, centrifugal RH
- Exhaust System
- Exhaust manifold — dry, heat shields
- Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
- Water-cooled center sections
- Flywheels and Flywheel Housings
- SAE No. 0 or SAE No. 1
- SAE standard rotation
- Fuel System
- MEUI system
- Fuel filter, RH ( 2 micron high performance)
- Fuel transfer pump
- Fuel priming pump (optional electric priming pump)
- Lube System
- Crankcase breather — rear mounted
- Oil cooler — RH
- Side turbo — oil filler in RH front gear case
- Rear turbo — oil filler in RH valve cover
- Oil level gauge — RH
- Oil filter — RH
- Oil pan rear sump
- Power Take-Offs
- Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
- General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
C27 ACERT™ Optional Equipment
- Air Inlet System
- Air lines
- Air cleaners
- Precleaners
- Charging System
- Battery chargers
- Charging alternators
- Alternator mountings
- Cooling System
- Blower fans
- Suction fans
- Radiators
- Fuel Systems
- Electric fuel priming pump
- Instrumentation
- Gauges and instrument panels
- Lube System
- Lubricating oil
- Oil pan
- Oil filter
- Power Take-Offs
- Hydraulic pump drives
- Pulley
- Auxiliary drive
- Starting System
- Electric starting motor
- Battery sets - 24V
- Battery cable
- Battery rack
- Starting aids
- Packaging
- Overseas preservation
- Storage preservation
- Export packaging
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 1189 r/min1189 r/min
- Mounting Designation: F1 or F2
CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 892 r/min892 r/min
- Mounting Designation: F1 or F2
CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 rpm
- Mounting Designation: F1 or F2
CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 r/min894 r/min
- Mounting Designation: F1 or F2
3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
- Maximum Rating: 359 bkW482 BHP
- Aspiration: Turbocharged Aftercooled
3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
- Maximum Rating: 551 bkW739 BHP
- Aspiration: Turbocharged Aftercooled
3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
- Maximum Rating: 795 bkW1065 BHP
- Aspiration: Turbocharged Aftercooled
3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
- Maximum Rating: 1195 bkW1600 BHP
- Aspiration: Turbocharged Aftercooled
3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
- Maximum Rating: 1480 bkW1985 BHP
- Aspiration: Turbocharged Aftercooled
