SPECIFICATIONS
- Minimum Rating 1678 bkW2250 BHP
 - Maximum Rating 1864 bkW2500 BHP
 - Aspiration Turbocharged-Aftercooled
 - Bore 170 mm6.7 in
 - Displacement 58.9 l3596 in³
 - Stroke 215 mm8.5 in
 - Length 3116 mm123 in
 - Width 2308.7 mm90.9 in
 - Height 2635 mm104 in
 - Emissions Non-Road Mobile EPA Tier 4 Final
 - Flywheel And Flywheel Housing SAE No. 0
 - Flywheel Teeth 151
 - Weight 7164 kg15793 lb
 - Industry oil-and-gas
 
EQUIPMENT
3512E Tier 4 Final Standard Equipment
- Air Inlet System
- Air-to-air aftercooled
 - Air cleaners (single element w/service indicator)
 
 
- Control System
- ADEM A4 ECU, LH
 - With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)
 
 
- Cooling System
- ATAAC
 - Thermostats and housing, jacket water pump, gear-driven centrifugal (gear-driven centrifugal pumps)
 
 
- Exhaust System
- Land Well Service Engine:
 - Offshore Well Service Engine:
 
 
- Flywheels & Flywheel Housing
- Flywheel, SAE No. 0, 151 teeth
 
 
- Fuel System
- Secondary/tertiary fuel filters
 - Fuel priming pump (electric)
 - Common rail fuel system
 - Fuel transfer pump
 
 
- Lube System
- Crankcase breather — top-mounted
 - Electric prelube
 - Fumes disposal
 - Oil cooler
 - Oil filler and dipstick — LH
 - Oil pump
 - Oil filter — RH spin-on type
 - Rear sump oil pan, 250-hour change interval
 - Oil pan drain valve, 1" NPT female connection
 - Oil scavenger pump
 
 
- Mounting System
- Trunion front support
 
 
- Power Take-Offs
- Accessory drive -- Lower LH/upper RH
 - Front housing, two-sided
 
 
- Protection System
- ADEM A4 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
 - Emergency stop logic inputs provided at 40-pin customer interface connection
 - Dual Air inlet shutoff
 - Oil pressure monitor
 
 
- General
- Paint, Cat yellow
 - Vibration damper and guard
 - Lifting eyes
 - Hydraulic valve lash adjusters
 - Power link engine monitoring
 
 
3512E Tier 4 Final Optional Equipment
- Air Inlet System
- Optional heavy-duty air cleaners (dual element/service indicator with precleaners)
 - Four front-mounted turbochargers
 
 
- Charging System
- Charging alternators
 
 
- Control System
- Throttle position sensors
 - Local speed throttle control
 - Governor conversion
 - Variable speed radiator fan control
 
 
- Cooling System
- Coolant regulator conversion
 - Water level switch gauge
 - Coolant level sensors and coolant conditioner
 - External transmission cooler connections
 - Variable speed hydraulic fan pump
 
 
- Emissions Certifications
- US EPA Tier 4 Final
 
 
- Exhaust System
- Flexible exhaust fitting
 - Elbows, flange, bellows, rain caps
 - Industrial and residential mufflers (painted steel and stainless steel)
 
 
- Fuel Systems
- Flexible fuel lines
 - Primary fuel filter/fuel water separator
 
 
- Instrumentation
- Remote panel display and remote cylinder temperature display
 
 
- Lube System
- 500- hour deep sump oil pan (rear sump pan)
 
 
- Power Take-Offs
- Flywheel stub shaft
 - Front Crankshaft Adapter
 
 
- Protection System
- Sensors
 - Shutoff controls
 
 
- Starting System
- Hydraulic starter
 - Hydraulic starter - RH
 - Dual hydraulic starter - LHR
 - Manual engine barring device
 
 
- General
- Air compressor
 - Aftertreatment support package
 
 
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
                                CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 1189 r/min1189 r/min
 - Mounting Designation: F1 or F2
 
                                CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 892 r/min892 r/min
 - Mounting Designation: F1 or F2
 
                                CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 894 rpm
 - Mounting Designation: F1 or F2
 
                                CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 894 r/min894 r/min
 - Mounting Designation: F1 or F2
 
                                3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
 - Maximum Rating: 359 bkW482 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
 - Maximum Rating: 551 bkW739 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
 - Maximum Rating: 795 bkW1065 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
 - Maximum Rating: 1195 bkW1600 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
 - Maximum Rating: 1480 bkW1985 BHP
 - Aspiration: Turbocharged Aftercooled
 
          Articulated trucks
        
          Dozers
        
          Backhoe Loaders
        
          Hydraulic Mining Shovels
        
          ELECTRIC POWER
        
          MARINE POWER SYSTEMS
        
          INDUSTRIAL
        
          OIL AND GAS