SPECIFICATIONS
- Minimum Rating 1245 ekW1245 ekW
- Maximum Rating 1245 ekW1245 ekW
- Voltage 600
- Aspiration Turbocharged-Aftercooled
- Fuel System EUI
- Bore 170 mm6.69 in
- Displacement 59 l3574 in³
- Stroke 215 mm8.5 in
- Length 7880 mm310.2 in
- Width 2384 mm93.9 in
- Emissions U.S. EPA Nonroad Tier 2
- Oil Change Interval 500 h500 h
- Lube Oil System Refill 318 l84 gal (US)
- Cooling System Engine 157 l41 gal (US)
- Engine Control And Protection ADEM A3
- Generator SR4B
- Weight 13381 kg29500 lb
- Generator Set Control EMCP 4.3
- Industry oil-and-gas
EQUIPMENT
3512C (HD) Standard Equipment
- Air Inlet System
- Corrosion-resistant aftercooler core
- Air Inlet shutoff
- Regular duty air cleaner
- Control System
- ADEM A3 ECU, left-hand mounted
- Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls or
- Cat Digital Voltage Regulator (DVR), includes reactive droop capability, 3-phase voltage sensing, kVAR/PF modes, RFI suppression, min/max exciter limiter and exciter diode monitor, space heater and jacket water heater connection and controls, temperature monitoring for 6 stator RTDs and 2 bearing RTDs via J1939
- Cooling System
- Separate-circuit aftercooled
- Outlet controlled jacket water thermostat
- Jacket water pump - gear driven
- Dual outlet
- Aftercooler water pump - gear driven
- Aftercooler water thermostat
- Exhaust System
- Dry exhaust manifold
- Dual turbochargers, water cooled bearings
- Exhaust adapter, 297 mm I.D. to 340 mm I.D. (11.7 in to 13.4 in)
- Weldable flange, 360 mm I.D. (14.2 in)
- Flywheel and Housing
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
- Fuel System
- Fuel filter simplex (LH) with priming pump (LH)
- Fuel transfer pump
- Fuel return line with flexible connection
- Electronic unit injectors
- Fuel priming pump
- Instrumentation
- Emergency stop button
- Analog gauges:
- Service port connector
- Customer connection terminal blocks
- EMCP 4.3 Control Panel
- 140 mm (5.5 in) Graphical Display
- Communication
- Controls
- Generator Set Protection
- Outputs
- Inputs
- Other Features
- Lubrication System
- Crankcase breather
- Oil cooler
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
- Simplex oil filter
- Mounting System
- 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
- Viscous damper drive line coupler
- Power take-offs
- Accessory drive
- Lower LH front (available for PTO usage)
- Front housing, two-sided
- Protection System
- Engine alarms, derate, and shutdown in abnormal operation
- Starting System
- TDI air starting motor, RH - 1034 kPa (150 psi)
- LH control air silencer
- General
- Paint - Cat yellow
- Vibration damper and guard
- Lifting eyes
- Lift and cable two provisions
3512C (HD) Optional Equipment
- Air Inlet System
- Heavy duty air cleaner
- Remote air inlet adapter - rectangular
- Remote air inlet adapter - round
- Control System
- Load sharing governor, 2301A
- Load sharing module
- Governor conversion to 0-200 mA direct rack control
- Cooling System
- Radiator options:
- Coolant level sensor
- Coolant conditioner
- Exhaust System
- Exhaust flexible fitting, 318 I.D. mm (12.5 in)
- Elbow, 305 mm (12 in)
- Muffler 305 mm (12 in), non spark arresting
- Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
- Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
- Fuel System
- Custom fuel filter
- Primary fuel filter
- Primary fuel filter with water separator
- Generator Attachments
- Barrel-mounted petroleum terminal box with air filter and pressure differential switch
- Barrel-mounted petroleum terminal box
- Current droop transformer
- Cable access box
- Low voltage extension box
- Current sensing transformers (3)
- Bearing temperature detectors
- Instrumentation
- Communications module PL1000T
- Communications module PL1000E
- Thermocouples installed, one per cylinder
- Lubrication System
- RH installed centrifugal oil filter
- Crankcase fumes disposal
- Oil level regulator
- Mounting System
- 7.62 m (25 ft) outer base
- 9.14 m (30 ft) outer base
- 12.19 m (40 ft) outer base
- Package isolator supports (3), for mounting inner base to customer-supplied base
- Custom base
- Power Take-off
- Alternator, 24V, 60A
- Crankshaft pulley
- Protection System
- Explosion relief valves (3)
- Metal particle detector switch
- Metal particle detector with annunciator
- Starting System
- Custom starting motor
- Air pressure regulator
- General
- LH installed engine barring group
- Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
- Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
- Jacket water heater lines
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
-beb96e66b54b0cc48cbdde20d5d0da18.jpeg)
CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 1189 r/min1189 r/min
- Mounting Designation: F1 or F2
CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 892 r/min892 r/min
- Mounting Designation: F1 or F2
CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 rpm
- Mounting Designation: F1 or F2
CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 r/min894 r/min
- Mounting Designation: F1 or F2
3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
- Maximum Rating: 359 bkW482 BHP
- Aspiration: Turbocharged Aftercooled
3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
- Maximum Rating: 551 bkW739 BHP
- Aspiration: Turbocharged Aftercooled
3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
- Maximum Rating: 795 bkW1065 BHP
- Aspiration: Turbocharged Aftercooled
3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
- Maximum Rating: 1195 bkW1600 BHP
- Aspiration: Turbocharged Aftercooled
3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
- Maximum Rating: 1480 bkW1985 BHP
- Aspiration: Turbocharged Aftercooled
