3512C DGB oil and ga

  • Minimum Rating 1603 bkW2150 BHP
  • Maximum Rating 1864 bkW2500 BHP
  • Aspiration Turbocharged-Aftercooled

SPECIFICATIONS

  • Minimum Rating 1603 bkW2150 BHP
  • Maximum Rating 1864 bkW2500 BHP
  • Aspiration Turbocharged-Aftercooled
  • Bore 170 mm6.7 in
  • Displacement 58.6 l3574 in³
  • Stroke 215 mm8.5 in
  • Length 2804 mm110.4 in
  • Width 1504 mm59.2 in
  • Height 2192 mm86.3 in
  • Emissions Non-current EPA Tier 2
  • Flywheel And Flywheel Housing SAE No. 0
  • Flywheel Teeth 151
  • Weight 6645 kg14650 lb
  • Industry oil-and-gas

EQUIPMENT

3512C DGB Standard Equipment

  • Air Inlet System
    • Air-to-air aftercooled (ATAAC) (512DW04, 512DW05, 512DW06, 512DW07)
    • Air cleaners (single element w/service indicator)
  • Control System
    • ADEM A3 ECU, LH
    • With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)
  • Cooling System
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Torque converter connections
    • Thermostats and housing, jacket water pump, gear-driven centrifugal (gear-driven centrifugal pumps)
    • Connections for radiator cooling
    • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
  • Exhaust System
    • Land Well Service Engine:
    • Offshore Well Service Engine:
  • Flywheels & Flywheel Housing
    • Flywheel, SAE No. 0, 151 teeth
    • Flywheel housing, SAE No. 0
  • Fuel System
    • Primary fuel filter
    • Fuel priming pump
    • Fuel filter, RH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • No standard instrumentation
    • Optional — remote instrumentation available Service meter
  • Lube System
    • Crankcase breather — top-mounted
    • Oil cooler
    • Oil filler and dipstick — RH
    • Oil pump
    • Oil filter — RH spin-on type
    • Rear sump oil pan, 250-hour change interval
    • Oil pan drain valve, 3/4" NPT female connection
    • Fumes disposal
    • Scavenger pump
  • Mounting System
    • Trunion front support
  • Power Take-Offs
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Front housing, two-sided
  • Protection System
    • ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
    • Emergency stop logic inputs provided at 40-pin customer interface connection
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Single Air inlet shutoff
  • General
    • Paint, Cat yellow
    • Vibration damper and guard
    • Lifting eyes

3512C DGB Optional Equipment

  • Air Inlet System
    • Air cleaner
    • Remote air inlet adapters
    • Air inlet heater
  • Charging System
    • Battery chargers
    • Charging alternators
  • Control System
    • Throttle position sensors
  • Cooling System
    • Coolant level sensor
    • Coolant conditioner
    • Connections
  • Emissions Certifications
    • IMO Certification and European Union Certification
  • Exhaust System
    • Flexible exhaust fitting
    • Elbows
    • Flange
    • Flange and exhaust adapters
    • Manifold
    • Mufflers
  • Fuel Systems
    • Flexible fuel lines
    • Fuel cooler
    • Fuel priming pumps
    • Water/fuel separator
    • Fuel level switch
  • Gauges and Instrument Panels
    • Engine mount premium panel
    • Remote instrumentation
  • Lube System
    • RH oil filters
    • Oil pan accessories
    • Oil pan front sump — 250 hrs
    • High capacity oil pan — 500 hrs
  • Power Take-Offs
    • Front Accessory Drives
    • Auxiliary Drive Shaft
    • Auxiliary Drive Pulleys
    • Front Stub Shaft
    • Front Crankshaft Adapter
    • Pulleys
  • Protection System
    • Corrosion Protection
  • Starting System
    • Air starting motors
    • Air pressure regulator
    • Air silencer
    • Hydraulic starter
    • Battery sets— 24V
    • Battery cable

RELATED PRODUCTS

CN1566 Electric Motor - Oil-and-gas

CN1566 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 1189 r/min1189 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3086 Electric Motor for Gas Compression - Oil-and-gas

CN3086 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 892 r/min892 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3586 Electric Motor for Gas Compression - Oil-and-gas

CN3586 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 rpm
  • Mounting Designation: F1 or F2
Get a quote
CN5086 Electric Motor - Oil-and-gas

CN5086 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 r/min894 r/min
  • Mounting Designation: F1 or F2
Get a quote
3406C - Oil-and-gas

3406C

oil and gas

  • Minimum Rating: 217 bkW292 BHP
  • Maximum Rating: 359 bkW482 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3412 - Oil-and-gas

3412

oil and gas

  • Minimum Rating: 476 bkW638 BHP
  • Maximum Rating: 551 bkW739 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3508 - Oil-and-gas

3508

oil and gas

  • Minimum Rating: 709 bkW950 BHP
  • Maximum Rating: 795 bkW1065 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3512 - Oil-and-gas

3512

oil and gas

  • Minimum Rating: 1066 bkW1430 BHP
  • Maximum Rating: 1195 bkW1600 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3516 - Oil-and-gas

3516

oil and gas

  • Minimum Rating: 1417 bkW1900 BHP
  • Maximum Rating: 1480 bkW1985 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
Get a quote