SPECIFICATIONS
- Minimum Rating 1550 eKW (1937 kVA)
 - Maximum Rating 1700 eKW (2125 kVA)
 - Frequency 60 hz
 - Speed 1800
 - Aspiration TTA
 - Bore 170 mm6.7 in
 - Displacement 58.56 l3574 in³
 - Stroke 215 mm8.46 in
 - Configuration Vee 12 4-Stroke-Cycle Diesel
 - Length 5085.3 mm200.2 in
 - Width 2142.1 mm84.3 in
 - Height 2131.1 mm83.9 in
 - Emissions IMO II
 - Weight Estimated 12762 kg28136 lb
 - Industry marine-power-systems
 
EQUIPMENT
3512C Standard Equipment
- AIR INLET SYSTEM
- Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
 
 
- CONTROL SYSTEM
- Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
 
 
- COOLING SYSTEM
- Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
 
 
- EXHAUST SYSTEM
- Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
 
 
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
 
 
- FUEL SYSTEM
- Fuel filter, RH, with service indicators
 - Fuel transfer pump
 - Electronically Controlled Unit Injectors
 
 
- INSTRUMENTATION
- Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
 
 
- LUBE SYSTEM
- Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
 
 
- MOUNTING SYSTEM
- Industrial type engine mounting rails)
 
 
- POWER TAKE-OFFS
- Accessory drive Lower RH, Lower LH Front housing, Two-sided
 
 
- PROTECTION SYSTEM
- A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
 - Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
 
 
- GENERAL
- Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
 
 
3512C Optional Equipment
- AIR INLET SYSTEM
- Air Cleaner Removal
 - Remote Air Inlet Adapters
 
 
- CHARGING SYSTEM
- Battery Chargers
 - Charging Alternators
 
 
- CONTROL SYSTEM
- Load Sharing module
 - Local speed throttle control
 
 
- COOLING SYSTEM
- Water level switch gauge
 - Coolant level sensors
 - Connections
 - Keel Cooling Conversions
 - Radiator cooling conversion
 - Heat exchangers
 - Auxiliary water pumps
 - Sea water pump removal
 - Air separator
 
 
- EXHAUST SYSTEM
- Exhaust outlet
 - Flexible fittings
 - Elbows
 - Flanges
 - Flange and exhaust expanders
 - Mufflers
 
 
- FUEL SYSTEM
- Fuel Cooler
 - Fuel priming pumps
 - Flexible fuel lines
 - Rigid Fuel Lines
 - Primary fuel filter
 - Fuel level switch
 
 
- GENERATORS AND GENERATOR ATTACHMENTS
- 1500/1800 RPM, 1000/1200 RPM
 - Low Voltage Connection
 - Generator Conversion
 - Low Voltage Extension Box
 - RFI Filter
 - Bearing Temperature Detectors
 - Manual Voltage Control
 - Air Filter
 
 
- INSTRUMENTATION
- PL1000T Communication Module
 - PL1000E Communication Module
 - Customer Interface Box
 - Thermocouples
 - Remote panel display
 - Remote cylinder temperature display
 
 
- LUBE SYSTEM
- Oil Pan
 - Oil pan accessories
 - Sump pumps
 - Prelubrication Options
 - Lubricating oil
 - Centrifugal Oil Filter
 
 
- MOUNTING SYSTEM
- Vibration isolators
 - Rails
 
 
- POWER TAKE-OFFS
- Flywheel guard
 - Flexible coupling
 - Coupling hub
 - Front housing accessories
 - Upper left hand front location
 - Upper left hand rear location
 - Upper right hand front location:
 - Upper right hand rear location
 - Lower left hand front location
 - Front housing accessory drives
 - Front power take-offs
 - Crankshaft pulleys
 - Damper guard removals
 
 
- PROTECTION SYSTEM
- Air inlet shutoffs
 - Switches and contactors
 - Explosion relief valve
 - Sensors
 
 
- STARTING SYSTEM
- Starting motors or barring divice
 - Air starting motors options
 - Battery sets - 24 volt - Dry
 - Battery rack
 - Jacket Water Heater
 
 
- GENERAL
- Tool set
 - Caterpillar datalink wire
 
 
- SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
- Commissioning
 
 
RELATED PRODUCTS
                                3512E
marine power systems
- Aspiration: TA
 - Bore: 170 mm6.69 in
 - Displacement: 58.6 l3574 in³
 
                                C18 IMO II
marine power systems
- Minimum Rating: 301 bkW404 BHP
 - Maximum Rating: 492 bkW660 BHP
 - Aspiration: TA, TTA
 
                                C18 Tier 3
marine power systems
- Minimum Rating: 465 bkW624 BHP
 - Maximum Rating: 599 bkW803 BHP
 - Aspiration: TA, TTA
 
                                C280
marine power systems
- Minimum Rating: 1730 bkW2320 BHP
 - Maximum Rating: 5420 bkW7268 BHP
 - Aspiration: TA
 
                                C32 IMO II
marine power systems
- Minimum Rating: 590 bkW791 BHP
 - Maximum Rating: 994 bkW1333 BHP
 - Aspiration: TTA
 
                                C32 IMO III
marine power systems
- Minimum Rating: 262 bkW352 BHP
 - Maximum Rating: 874 bkW1172 BHP
 - Aspiration: Turbocharged-aftercooled aspiration
 
                                C32 Tier 3
marine power systems
- Minimum Rating: 781 bkW1047 BHP
 - Maximum Rating: 994 bkW1333 BHP
 - Aspiration: TTA
 
                                C32 Tier 3 / IMO II
marine power systems
- Minimum Rating: 234 bkW314 BHP
 - Maximum Rating: 994 bkW1333 BHP
 - Aspiration: Turbocharged-aftercooled aspiration
 
          Articulated trucks
        
          Dozers
        
          Backhoe Loaders
        
          Hydraulic Mining Shovels
        
          ELECTRIC POWER
        
          MARINE POWER SYSTEMS
        
          INDUSTRIAL
        
          OIL AND GAS