3512C - Oil-and-gas

Articulated Trucks Asphalt Pavers Backhoe Loaders Cold Planers compactors DOZERS draglines

Drills Electric rope shovels excavators hydraulic mining shovels motor graders off-highway trucks pipelayers

road reclaimers skid steer and compact track loaders track Loaders underground - hard rock wheel loaders wheel tractor - scrapers

PARTS.CAT.COM Articulated trucks Dozers Backhoe Loaders Hydraulic Mining Shovels

SUSTAINABILITY ELECTRIC POWER MARINE POWER SYSTEMS INDUSTRIAL OIL AND GAS

© 2025 Caterpillar. All Rights Reserved. Cat, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

NEW / / oil and gas / 3512C

3512C oil and ga

3512C

SPECIFICATIONS

EQUIPMENT

360° INTERACTIVE

RELATED PRODUCTS

3512C

oil and gas

Minimum Rating 1678 bkW2250 BHP
Maximum Rating 1864 bkW2500 BHP
Aspiration Turbocharged-Aftercooled

Get a quote

OVERVIEW

SPECIFICATIONS

Minimum Rating 1678 bkW2250 BHP
Maximum Rating 1864 bkW2500 BHP
Aspiration Turbocharged-Aftercooled
Bore 170 mm6.7 in
Displacement 3596 l58.9 in³
Stroke 215 mm8.5 in
Length 2880 mm113.8 in
Width 1630 mm64.2 in
Height 2185 mm86.1 in
Emissions Non-current EPA Tier 2 and China Stage III
Flywheel And Flywheel Housing SAE No. 0
Flywheel Teeth 151
Weight 6416 kg14145 lb
Industry oil-and-gas

EQUIPMENT

3512C Standard Equipment

Air Inlet System
- Heavy-duty air cleaners (dual element/service indicator)
- Four center-mounted turbochargers

Control System
- Cat® ADEM A3 ECU — LH
- With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)

Cooling System
- Separate Circuit SCAC system
- Torque converter connections
- Thermostats and housing, jacket and separate circuit water pump, gear-driven centrifugal

Exhaust System
- Land well service engine

Flywheel and Flywheel Housings
- Flywheel, SAE No. 0, 151 teeth
- Flywheel housing, SAE No. 0

Fuel System
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors

Instrumentation
- No standard instrumentation
- Optional, remote instrumentation available
- Service meter

Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filler and dipstick — LH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan — 250-hour change interval
- Oil pan drain valve — 1" NPT female connection
- Fumes disposal
- Scavenger pump

Mounting System
- Trunion front support

Power Take-Offs
- Accessory drive — lower LH
- Front housing — two-sided

Protection System
- ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40-pin customer interface connection
- Dual air inlet shutoff
- Oil pressure monitor

General
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes

3512C Optional Equipment

Charging System
- Charging alternators

Control System
- Local speed throttle control
- Throttle position sensors
- Governor conversion

Cooling System
- Coolant regulator conversion
- Water level switch gauge
- Coolant level sensors and coolant conditioner

Exhaust System
- Flexible exhaust fitting
- Elbows, flange, exhaust adapters
- Manifold and mufflers

Fuel Systems
- Flexible fuel lines
- Water/fuel separator
- Fuel level switch

Instrumentation
- Remote panel display and remote cylinder temperature display
- Gauges and instrument panels

Lube System
- Oil pans and filters
- Deep sump oil pan and front sump pan

Power Take-Offs
- Front crankshaft adapter
- Flywheel stub shaft

Protection System
- Sensors
- Shutoff controls

Starting System
- Air starting motors
- Electric starting motors
- Hydraulic starter
- Ether starting aids
- Battery sets — 24V
- Battery cable and battery rack

360° INTERACTIVE

Exterior

SPECIFICATIONS

Minimum Rating 1678 bkW2250 BHP
Maximum Rating 1864 bkW2500 BHP
Aspiration Turbocharged-Aftercooled
Bore 170 mm6.7 in
Displacement 3596 l58.9 in³
Stroke 215 mm8.5 in
Length 2880 mm113.8 in
Width 1630 mm64.2 in
Height 2185 mm86.1 in
Emissions Non-current EPA Tier 2 and China Stage III
Flywheel And Flywheel Housing SAE No. 0
Flywheel Teeth 151
Weight 6416 kg14145 lb
Industry oil-and-gas

EQUIPMENT

3512C Standard Equipment

Air Inlet System
- Heavy-duty air cleaners (dual element/service indicator)
- Four center-mounted turbochargers

Control System
- Cat® ADEM A3 ECU — LH
- With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)

Cooling System
- Separate Circuit SCAC system
- Torque converter connections
- Thermostats and housing, jacket and separate circuit water pump, gear-driven centrifugal

Exhaust System
- Land well service engine

Flywheel and Flywheel Housings
- Flywheel, SAE No. 0, 151 teeth
- Flywheel housing, SAE No. 0

Fuel System
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors

Instrumentation
- No standard instrumentation
- Optional, remote instrumentation available
- Service meter

Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filler and dipstick — LH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan — 250-hour change interval
- Oil pan drain valve — 1" NPT female connection
- Fumes disposal
- Scavenger pump

Mounting System
- Trunion front support

Power Take-Offs
- Accessory drive — lower LH
- Front housing — two-sided

Protection System
- ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40-pin customer interface connection
- Dual air inlet shutoff
- Oil pressure monitor

General
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes

3512C Optional Equipment

Charging System
- Charging alternators

Control System
- Local speed throttle control
- Throttle position sensors
- Governor conversion

Cooling System
- Coolant regulator conversion
- Water level switch gauge
- Coolant level sensors and coolant conditioner

Exhaust System
- Flexible exhaust fitting
- Elbows, flange, exhaust adapters
- Manifold and mufflers

Fuel Systems
- Flexible fuel lines
- Water/fuel separator
- Fuel level switch

Instrumentation
- Remote panel display and remote cylinder temperature display
- Gauges and instrument panels

Lube System
- Oil pans and filters
- Deep sump oil pan and front sump pan

Power Take-Offs
- Front crankshaft adapter
- Flywheel stub shaft

Protection System
- Sensors
- Shutoff controls

Starting System
- Air starting motors
- Electric starting motors
- Hydraulic starter
- Ether starting aids
- Battery sets — 24V
- Battery cable and battery rack

360° INTERACTIVE

Exterior

Interior

RELATED PRODUCTS

CN1566 Electric Motor - Oil-and-gas

CN1566 Electric Motor

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 1189 r/min1189 r/min
Mounting Designation: F1 or F2

Get a quote

CN3086 Electric Motor for Gas Compression - Oil-and-gas

CN3086 Electric Motor for Gas Compression

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 892 r/min892 r/min
Mounting Designation: F1 or F2

Get a quote

CN3586 Electric Motor for Gas Compression - Oil-and-gas

CN3586 Electric Motor for Gas Compression

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 894 rpm
Mounting Designation: F1 or F2

Get a quote

CN5086 Electric Motor - Oil-and-gas

CN5086 Electric Motor

oil and gas

Electric Motor Type: Squirrel Cage Induction Motor
Full Load Speed: 894 r/min894 r/min
Mounting Designation: F1 or F2

Get a quote

3406C - Oil-and-gas

3406C

oil and gas

Minimum Rating: 217 bkW292 BHP
Maximum Rating: 359 bkW482 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3412 - Oil-and-gas

3412

oil and gas

Minimum Rating: 476 bkW638 BHP
Maximum Rating: 551 bkW739 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3508 - Oil-and-gas

3508

oil and gas

Minimum Rating: 709 bkW950 BHP
Maximum Rating: 795 bkW1065 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3512 - Oil-and-gas

3512

oil and gas

Minimum Rating: 1066 bkW1430 BHP
Maximum Rating: 1195 bkW1600 BHP
Aspiration: Turbocharged Aftercooled

Get a quote

3516 - Oil-and-gas

3516

oil and gas

Minimum Rating: 1417 bkW1900 BHP
Maximum Rating: 1480 bkW1985 BHP
Aspiration: Turbocharged Aftercooled

Get a quote