NEW / / oil and gas / 3512C
3512C
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
- Minimum Rating 932 bkW1250 BHP
- Maximum Rating 1100 bkW1475 BHP
- Aspiration Turbocharged-Aftercooled
SPECIFICATIONS
- Minimum Rating 932 bkW1250 BHP
- Maximum Rating 1100 bkW1475 BHP
- Aspiration Turbocharged-Aftercooled
- Bore 170 mm6.69 in
- Displacement 59 l3574 in³
- Stroke 215 mm8.46 in
- Length 2682 mm105.6 in
- Width 1791 mm70.5 in
- Height 2019 mm79.5 in
- Emissions U.S. EPA Non-road Tier 2
- Engine Weight Net Dry 5423 kg11945 lb
- Oil Change Interval 500
- Rotation From Flywheel End Counterclockwise
- Flywheel And Flywheel Housing SAE No. 00
- Flywheel Teeth 183
- Rated Speed 1200 r/min1200 r/min
- Governor And Protection ADEM A3
- Minimum Cooling System Engine Only 157 l41 gal (US)
- Industry oil-and-gas
EQUIPMENT
3512C Standard Equipment
- Air Inlet System
- Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)
- Dual rear-mounted turbochargers
- Control System
- ADEM A3 ECU — LH
- Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)
- Cooling System
- Torque converter connections
- Thermostats and housing, jacket water pump, gear-drivencentrifugal
- Connections for radiator cooling
- Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
- Separate Circuit Aftercooler (SCAC)
- Exhaust System
- Exhaust manifold — dry, stainless steel bellows
- Dual turbochargers with watercooled bearings
- Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.
- Flywheels and Flywheel Housing
- Flywheel, SAE No. 0 — 151 teeth
- Flywheel housing — SAE No. 0
- Fuel System
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
- Instrumentation
- Electronic instrument panel
- Instrumentation readouts:
- Lube System
- Crankcase breather — top-mounted
- Oil cooler
- Oil filler and dipstick — RH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan, 250-hour change interval
- Oil pan drain valve — 3/4" NPT female connection
- Mounting System
- Rails — mounting, floor type
- Power Take-Offs
- Front housing — two-sided
- Protection System
- ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions
- Emergency stop logic inputs provided at 40-pin customer interfaceconnection
- Air inlet shutoff
- Starting System
- Air starting motor — RH, 620 to 1034 kPa (90 to 150 psi)
- Air silencer
- General
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes
- B-Series LAND
3512C Optional Equipment
- Air Inlet System
- Air cleaner and air cleaner mounting
- Remote air inlet adapters
- Air inlet heater
- Charging System
- Battery chargers
- Charging alternators
- Control System
- Local speed throttle control
- Throttle position sensors
- Load sharing modules
- Governor conversion
- Cooling System
- High gloss black folded core radiators
- Coolant regulator conversion
- Belt guard and radiator guard
- Blower fan
- Radiator cover
- Fan drive and fan pulleys
- Water level switch gauge
- Coolant level sensors
- Coolant conditioner
- Expansion tank
- Heat exchanger cooling conversion
- Auxiliary water pump
- Air separator
- Exhaust System
- Flexible exhaust fitting
- Elbows and flange
- Flange and exhaust adapters
- Manifold and mufflers
- Fuel Systems
- Flexible fuel lines
- Fuel cooler
- Water/fuel separator
- Fuel level switch
- Instrumentation
- Customer management device
- Remote panel display and remote cylinder temperature display
- Switches and contactors
- Gauges and instrument panels
- Lube System
- Fumes disposal
- Oil pans
- Prelube options
- Sump pumps
- Oil Filters
- Power Take-Offs
- Front housing
- Flexible couplings
- Coupling hub
- Front accessory drives
- Auxiliary drive shaft
- Auxiliary drive pulleys
- Front stub shaft
- Damper guard removal
- Pulleys
- Flywheel stub shaft
- Protection System
- Shutoffs
- Switches and contractors
- Explosion relief valve
- Sensors
- Oil pressure monitor
- Shutoff controls
- Corrosion protection
- Starting System
- Air starting motors — electric
- Air pressure regulator
- Air silencer
- Air start controls — manual, electric
- Redundant start
- Starting aids
- Battery sets – 24V
- Battery cable and battery rack
360° INTERACTIVE
SPECIFICATIONS
- Minimum Rating 932 bkW1250 BHP
- Maximum Rating 1100 bkW1475 BHP
- Aspiration Turbocharged-Aftercooled
- Bore 170 mm6.69 in
- Displacement 59 l3574 in³
- Stroke 215 mm8.46 in
- Length 2682 mm105.6 in
- Width 1791 mm70.5 in
- Height 2019 mm79.5 in
- Emissions U.S. EPA Non-road Tier 2
- Engine Weight Net Dry 5423 kg11945 lb
- Oil Change Interval 500
- Rotation From Flywheel End Counterclockwise
- Flywheel And Flywheel Housing SAE No. 00
- Flywheel Teeth 183
- Rated Speed 1200 r/min1200 r/min
- Governor And Protection ADEM A3
- Minimum Cooling System Engine Only 157 l41 gal (US)
- Industry oil-and-gas
EQUIPMENT
3512C Standard Equipment
- Air Inlet System
- Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)
- Dual rear-mounted turbochargers
- Control System
- ADEM A3 ECU — LH
- Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)
- Cooling System
- Torque converter connections
- Thermostats and housing, jacket water pump, gear-drivencentrifugal
- Connections for radiator cooling
- Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
- Separate Circuit Aftercooler (SCAC)
- Exhaust System
- Exhaust manifold — dry, stainless steel bellows
- Dual turbochargers with watercooled bearings
- Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.
- Flywheels and Flywheel Housing
- Flywheel, SAE No. 0 — 151 teeth
- Flywheel housing — SAE No. 0
- Fuel System
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
- Instrumentation
- Electronic instrument panel
- Instrumentation readouts:
- Lube System
- Crankcase breather — top-mounted
- Oil cooler
- Oil filler and dipstick — RH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan, 250-hour change interval
- Oil pan drain valve — 3/4" NPT female connection
- Mounting System
- Rails — mounting, floor type
- Power Take-Offs
- Front housing — two-sided
- Protection System
- ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions
- Emergency stop logic inputs provided at 40-pin customer interfaceconnection
- Air inlet shutoff
- Starting System
- Air starting motor — RH, 620 to 1034 kPa (90 to 150 psi)
- Air silencer
- General
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes
- B-Series LAND
3512C Optional Equipment
- Air Inlet System
- Air cleaner and air cleaner mounting
- Remote air inlet adapters
- Air inlet heater
- Charging System
- Battery chargers
- Charging alternators
- Control System
- Local speed throttle control
- Throttle position sensors
- Load sharing modules
- Governor conversion
- Cooling System
- High gloss black folded core radiators
- Coolant regulator conversion
- Belt guard and radiator guard
- Blower fan
- Radiator cover
- Fan drive and fan pulleys
- Water level switch gauge
- Coolant level sensors
- Coolant conditioner
- Expansion tank
- Heat exchanger cooling conversion
- Auxiliary water pump
- Air separator
- Exhaust System
- Flexible exhaust fitting
- Elbows and flange
- Flange and exhaust adapters
- Manifold and mufflers
- Fuel Systems
- Flexible fuel lines
- Fuel cooler
- Water/fuel separator
- Fuel level switch
- Instrumentation
- Customer management device
- Remote panel display and remote cylinder temperature display
- Switches and contactors
- Gauges and instrument panels
- Lube System
- Fumes disposal
- Oil pans
- Prelube options
- Sump pumps
- Oil Filters
- Power Take-Offs
- Front housing
- Flexible couplings
- Coupling hub
- Front accessory drives
- Auxiliary drive shaft
- Auxiliary drive pulleys
- Front stub shaft
- Damper guard removal
- Pulleys
- Flywheel stub shaft
- Protection System
- Shutoffs
- Switches and contractors
- Explosion relief valve
- Sensors
- Oil pressure monitor
- Shutoff controls
- Corrosion protection
- Starting System
- Air starting motors — electric
- Air pressure regulator
- Air silencer
- Air start controls — manual, electric
- Redundant start
- Starting aids
- Battery sets – 24V
- Battery cable and battery rack
RELATED PRODUCTS
CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 1189 r/min1189 r/min
- Mounting Designation: F1 or F2
CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 892 r/min892 r/min
- Mounting Designation: F1 or F2
CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 rpm
- Mounting Designation: F1 or F2
CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
- Full Load Speed: 894 r/min894 r/min
- Mounting Designation: F1 or F2
3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
- Maximum Rating: 359 bkW482 BHP
- Aspiration: Turbocharged Aftercooled
3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
- Maximum Rating: 551 bkW739 BHP
- Aspiration: Turbocharged Aftercooled
3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
- Maximum Rating: 795 bkW1065 BHP
- Aspiration: Turbocharged Aftercooled
3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
- Maximum Rating: 1195 bkW1600 BHP
- Aspiration: Turbocharged Aftercooled
3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
- Maximum Rating: 1480 bkW1985 BHP
- Aspiration: Turbocharged Aftercooled
