NEW / / marine power systems / 3508C
3508C marine power system
3508C
SPECIFICATIONS
EQUIPMENT
RELATED PRODUCTS
3508C
marine power systems
- Aspiration TTA
- Bore 170 mm6.7 in
- Displacement 34.5 l2107 in³
SPECIFICATIONS
- Aspiration TTA
- Bore 170 mm6.7 in
- Displacement 34.5 l2107 in³
- Stroke 190 mm7.5 in
- Configuration Vee 8, 4-Stroke-Cycle Diesel
- Length 2117 mm83.4 in
- Width 1703 mm67 in
- Height 1829 mm72 in
- Emissions IMO II, EU IW
- Rotation From Flywheel End Counterclockwise or Clockwise
- Power Range 775-1100 bhp (578-820 bkW)
- Minimum Dry Weight 4960 kg10935 lb
- Speed Range 1200-1600 rpm
- Industry marine-power-systems
EQUIPMENT
3508C Standard Equipment
- Fuel System
- Fuel filter, RH, with service indicators.
- Fuel transfer pump.
- Electronically controlled init injectors
- Instrumentation
- Graphical Unit (Marine Power Display) for analog or digital display of
- Lube System
- Crankcase breather, Top mounted
- Oil filter, RH, with service indicators
- Oil filler and dipstick, RH
- Standard sump oil pan (500 Hour oil change interval)
- Oil pump, gear type
- Mounting System
- Rails, engine mounting, ledge type, 203 mm x 203 mm (8 in x 8 in)
- Power Takeoffs
- Accessory drive
- Front housing, two-sided
- General
- Vibration damper and guard
- Lifting eyes
- Paint, Caterpillar Yellow engine with black rails
- NOTE: Engines for heat exchanger cooling do NOT include heat exchanger.
- Flywheel and Flywheel Housing
- Flywheel, SAE No. 0, 151 teeth.
- Flywheel housing, SAE No. 0.
- Air Inlet System
- Separate circuit aftercooler core, corrosion resistant coated (air side)
- Air cleaner, regular duty
- Dual turbochargers, 152 mm (6 in) OD straight connection
- Control System
- Dual Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
- Cooling System
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump with SCAC engines
- Auxiliary sea water pump, Centrifugal, Non-self-priming
- Expansion tank
- Exhaust System
- Dry gas tight exhaust manifolds with heat shields.
- Dual turbochargers with watercooled bearings and heat shield.
- Exhaust outlet, vertical, 203 mm (8 in) round flanged.
- Protection System
- A4 ECU Electronic Monitoring System provides customer programmable engine de-rate strategies to protect against adverse operating conditions
- AIII Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:
3508C Optional Equipment
- Charging System
- Battery Charger, 10 amp
- Charging Alternators
- Cooling System
- Water Level Switch Gauge
- Coolant Level Sensors
- Connections
- Keel Cooling Conversions
- Heat Exchangers
- Auxiliary Water Pumps
- Sea Water Pump Removal
- Coolant Shunt Tanks
- Air Separator
- Marine Gear Cooling
- Instrumentation
- PL1000T Communication Module
- Customer Interface
- Thermocouples
- Remote Panel Display
- Remote Cylinder Temperature Display
- Pilot House Instrument Panels
- Marine Gear Sensors
- Engine Vision Display System
- Mounting System
- Engine Supports
- Vibration Isolators
- Power Take-Offs
- Front Housing Accessories
- Flexible Coupling and Guards
- Upper Left Hand Front Location:
- Upper Right Hand Front Location:
- Upper Right Hand Rear Location:
- Lower Left Hand Front Location:
- Lower Left Hand Rear Location:
- Front Housing Accessory Drives
- Upper LH Accessory Drive
- Upper RH Accessory Drive
- Front Power Take Offs
- Crankshaft Pulleys
- Damper Guard Removals
- Air Inlet System
- Remote Air Inlet Adapters
- Control System
- Throttle Position Sensor
- Throttle Position Signal Conv.
- Throttle Position Sensor Removal
- Local Speed Throttle Control
- Throttle Synchronization
- Exhaust System
- Exhaust Outlet
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
- Lube System
- Oil Pan
- Oil Pan Accessories
- Sump Pumps
- Lubricating Oil
- Protection System
- Air Inlet Shutoffs
- Switches and Contactors
- Explosion Relief Valve
- Sensors
- Special Appearance
- Special Appearance Packages with Chrome Covers
- Chrome Plated Relief Valves
- Black Air Cleaners
- Yacht Class Finish
- Starting System
- Starting Motors or Barring Device
- Air Starting Motor Options:
- Starting Aids
- Battery Sets - 24 Volt - Dry
- Battery rack
- General
- Tool set
- Caterpillar datalink wire
- Packing
- Shrink Wrap Protection
- Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
- Storage Preservation with Vapor Corrosion Inhibitor
- Export Packaging
360° INTERACTIVE
SPECIFICATIONS
- Aspiration TTA
- Bore 170 mm6.7 in
- Displacement 34.5 l2107 in³
- Stroke 190 mm7.5 in
- Configuration Vee 8, 4-Stroke-Cycle Diesel
- Length 2117 mm83.4 in
- Width 1703 mm67 in
- Height 1829 mm72 in
- Emissions IMO II, EU IW
- Rotation From Flywheel End Counterclockwise or Clockwise
- Power Range 775-1100 bhp (578-820 bkW)
- Minimum Dry Weight 4960 kg10935 lb
- Speed Range 1200-1600 rpm
- Industry marine-power-systems
EQUIPMENT
3508C Standard Equipment
- Fuel System
- Fuel filter, RH, with service indicators.
- Fuel transfer pump.
- Electronically controlled init injectors
- Instrumentation
- Graphical Unit (Marine Power Display) for analog or digital display of
- Lube System
- Crankcase breather, Top mounted
- Oil filter, RH, with service indicators
- Oil filler and dipstick, RH
- Standard sump oil pan (500 Hour oil change interval)
- Oil pump, gear type
- Mounting System
- Rails, engine mounting, ledge type, 203 mm x 203 mm (8 in x 8 in)
- Power Takeoffs
- Accessory drive
- Front housing, two-sided
- General
- Vibration damper and guard
- Lifting eyes
- Paint, Caterpillar Yellow engine with black rails
- NOTE: Engines for heat exchanger cooling do NOT include heat exchanger.
- Flywheel and Flywheel Housing
- Flywheel, SAE No. 0, 151 teeth.
- Flywheel housing, SAE No. 0.
- Air Inlet System
- Separate circuit aftercooler core, corrosion resistant coated (air side)
- Air cleaner, regular duty
- Dual turbochargers, 152 mm (6 in) OD straight connection
- Control System
- Dual Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
- Cooling System
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump with SCAC engines
- Auxiliary sea water pump, Centrifugal, Non-self-priming
- Expansion tank
- Exhaust System
- Dry gas tight exhaust manifolds with heat shields.
- Dual turbochargers with watercooled bearings and heat shield.
- Exhaust outlet, vertical, 203 mm (8 in) round flanged.
- Protection System
- A4 ECU Electronic Monitoring System provides customer programmable engine de-rate strategies to protect against adverse operating conditions
- AIII Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:
3508C Optional Equipment
- Charging System
- Battery Charger, 10 amp
- Charging Alternators
- Cooling System
- Water Level Switch Gauge
- Coolant Level Sensors
- Connections
- Keel Cooling Conversions
- Heat Exchangers
- Auxiliary Water Pumps
- Sea Water Pump Removal
- Coolant Shunt Tanks
- Air Separator
- Marine Gear Cooling
- Instrumentation
- PL1000T Communication Module
- Customer Interface
- Thermocouples
- Remote Panel Display
- Remote Cylinder Temperature Display
- Pilot House Instrument Panels
- Marine Gear Sensors
- Engine Vision Display System
- Mounting System
- Engine Supports
- Vibration Isolators
- Power Take-Offs
- Front Housing Accessories
- Flexible Coupling and Guards
- Upper Left Hand Front Location:
- Upper Right Hand Front Location:
- Upper Right Hand Rear Location:
- Lower Left Hand Front Location:
- Lower Left Hand Rear Location:
- Front Housing Accessory Drives
- Upper LH Accessory Drive
- Upper RH Accessory Drive
- Front Power Take Offs
- Crankshaft Pulleys
- Damper Guard Removals
- Air Inlet System
- Remote Air Inlet Adapters
- Control System
- Throttle Position Sensor
- Throttle Position Signal Conv.
- Throttle Position Sensor Removal
- Local Speed Throttle Control
- Throttle Synchronization
- Exhaust System
- Exhaust Outlet
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
- Lube System
- Oil Pan
- Oil Pan Accessories
- Sump Pumps
- Lubricating Oil
- Protection System
- Air Inlet Shutoffs
- Switches and Contactors
- Explosion Relief Valve
- Sensors
- Special Appearance
- Special Appearance Packages with Chrome Covers
- Chrome Plated Relief Valves
- Black Air Cleaners
- Yacht Class Finish
- Starting System
- Starting Motors or Barring Device
- Air Starting Motor Options:
- Starting Aids
- Battery Sets - 24 Volt - Dry
- Battery rack
- General
- Tool set
- Caterpillar datalink wire
- Packing
- Shrink Wrap Protection
- Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
- Storage Preservation with Vapor Corrosion Inhibitor
- Export Packaging
RELATED PRODUCTS
3512E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 58.6 l3574 in³
3516E
marine power systems
- Aspiration: TA
- Bore: 170 mm6.69 in
- Displacement: 78 l4765 in³
C18 IMO II
marine power systems
- Minimum Rating: 301 bkW404 BHP
- Maximum Rating: 492 bkW660 BHP
- Aspiration: TA, TTA
C18 Tier 3
marine power systems
- Minimum Rating: 465 bkW624 BHP
- Maximum Rating: 599 bkW803 BHP
- Aspiration: TA, TTA
C280
marine power systems
- Minimum Rating: 1730 bkW2320 BHP
- Maximum Rating: 5420 bkW7268 BHP
- Aspiration: TA
C32 IMO II
marine power systems
- Minimum Rating: 590 bkW791 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 IMO III
marine power systems
- Minimum Rating: 262 bkW352 BHP
- Maximum Rating: 874 bkW1172 BHP
- Aspiration: Turbocharged-aftercooled aspiration
C32 Tier 3
marine power systems
- Minimum Rating: 781 bkW1047 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: TTA
C32 Tier 3 / IMO II
marine power systems
- Minimum Rating: 234 bkW314 BHP
- Maximum Rating: 994 bkW1333 BHP
- Aspiration: Turbocharged-aftercooled aspiration
