SPECIFICATIONS
- Minimum Rating 4370 ekW5460 kV·A
 - Maximum Rating 4370 ekW5460 kV·A
 - Aspiration Turbocharged-Aftercooled
 - Bore 320 mm12.6 in
 - Displacement 592 l36126 in³
 - Stroke 460 mm18.1 in
 - Length 12060 mm474.8 in
 - Width 3000 mm118.1 in
 - Height 5661 mm222.9 in
 - Emissions IMO Tier II
 - Lube Oil System Refill 10800 l2853 gal (US)
 - Cooling System Engine 1900 l502 gal (US)
 - Weight 150000 kg330000 lb
 - Generator Set Control Electronic
 - Engine Control Electronic
 - Industry oil-and-gas
 
EQUIPMENT
16CM32C Standard Equipment
- Engine
- Motor-driven barring gear, fitted on engine
 - Reversing contractor and push button switch with cable
 - Electronic speed setting equipment with actuator and speed pick-up
 - Emergency shutdown equipment with pushbutton, separate, formanual emergency stop
 
 
- Engine Indicators
- Gauge board with set liquid damped pressure gauges for:fuel, lubricating oil, fresh water, starting air, and charge air.
 - On-engine thermometers for fuel, lubricating oil, fresh water,and charge air
 - Electric remote speed indicator
 - Turbocharger and remote speed indicator
 - Exhaust gas temperature indicator
 
 
- Control
- Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
 - Starting solenoid valve on engine, 24 V DC
 - Separate electronic speed governor
 
 
- Monitoring for Unattended Operation
- Pressure switches, mounted on engine, for:
 - Switches for:
 - Control Cabinet with housings for wall mounting, including:
 
 
- Starting Air System
- Separate non-return valve for the starting air pipe to the engine
 
 
- Air Intake System
- Air intake filter, fitted on the turbocharger
 - – Air bottles, separate
 
 
- Fuel System
- Separate circulating pump driven by electric motor, horizontalor vertical
 - Duplex filter with differential pressure indication
 
 
- Exhaust System
- Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
 - Expansion joint separate
 - Separate silencer and spark arrester, unlagged 35 dB(A)
 
 
- Fresh Cooling Water System
- HT pump, fitted on engine
 - LT pump, separate, vertical design, electric motor driven
 - HT thermostat, not powered and separate
 - Engine preheating equipment, fitted on base frame
 
 
- Lubricating Oil System
- Plate cooler, fitted on engine
 - Force pump, fitted on engine
 - Prelubrication pump, fitted on base frame, electric motor driven
 - Boll and Kirch automatic backflushing filter, separate
 - Duplex filter with differential pressure indication, separate
 - Pressure control valve, separate
 - Thermostat, not powered, separate
 
 
- Connecting Parts – Engine
- Set of connecting parts between flange coupling and flywheel
 - Flexible flange coupling between engine and generator
 - Base frame with flywheel guard and incorporating lube oil sump tank,for engine and generator
 - Mounting of engine and generator on the base frame
 - Set of bonded rubber rails for resilient mounting of the base frame
 - Set of flexible pipe connections
 
 
- Tools
- Set of tools for the engine including hydraulic tightening tools and nozzle tester
 - Set of tools for turbocharger
 - Inside micrometer for cylinder liners
 - Ruler for cylinder liner
 
 
- Spare Parts
- Set of engine spare parts for unrestricted operation
 - Set of spare flexible pipe connections
 
 
RELATED PRODUCTS
                                CN1566 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 1189 r/min1189 r/min
 - Mounting Designation: F1 or F2
 
                                CN3086 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 892 r/min892 r/min
 - Mounting Designation: F1 or F2
 
                                CN3586 Electric Motor for Gas Compression
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 894 rpm
 - Mounting Designation: F1 or F2
 
                                CN5086 Electric Motor
oil and gas
- Electric Motor Type: Squirrel Cage Induction Motor
 - Full Load Speed: 894 r/min894 r/min
 - Mounting Designation: F1 or F2
 
                                3406C
oil and gas
- Minimum Rating: 217 bkW292 BHP
 - Maximum Rating: 359 bkW482 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3412
oil and gas
- Minimum Rating: 476 bkW638 BHP
 - Maximum Rating: 551 bkW739 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3508
oil and gas
- Minimum Rating: 709 bkW950 BHP
 - Maximum Rating: 795 bkW1065 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3512
oil and gas
- Minimum Rating: 1066 bkW1430 BHP
 - Maximum Rating: 1195 bkW1600 BHP
 - Aspiration: Turbocharged Aftercooled
 
                                3516
oil and gas
- Minimum Rating: 1417 bkW1900 BHP
 - Maximum Rating: 1480 bkW1985 BHP
 - Aspiration: Turbocharged Aftercooled
 
          Articulated trucks
        
          Dozers
        
          Backhoe Loaders
        
          Hydraulic Mining Shovels
        
          ELECTRIC POWER
        
          MARINE POWER SYSTEMS
        
          INDUSTRIAL
        
          OIL AND GAS