836K Landfill Compactor

Equipment / NEW / Compactors / Landfill Compactors / 836K

METRIC

836K

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

TOOLS AND EXPERT HELP

PRODUCT BROCHURES AND DOWNLOADS

MEDIA GALLERY

KEY SPECS

Gross Power 419.0kW562.0hp
Net Power 370.0kW496.0hp
Engine Model C18 Cat®

Get a quote

FIND A DEALER

OVERVIEW

FEATURES AT A GLANCE

POWERFUL EFFICIENCY

Impeller Clutch Torque Converter (ICTC) reduces wheel slippage and tip wear by modulating rim pull from 100 to 20 percent while depressing left pedal. After 20 percent rim pull is achieved the left pedal applies the brake.
Reduces wheel slippage without reducing hydraulic efficiency.
Improves fuel efficiency with its lock-up clutch torque converter providing direct drive.
Steering and Transmission Integrated Control System (STIC™) enhances operator comfort by integrating steering and transmission control functions in a single lever. Includes finger-controlled gear selection.
Low-effort integrated controls deliver faster cycles and help reduce operator fatigue.
The 836K's Steering System offers precise machine control enabled by its load-sensing hydraulic steering system.
Provides increased efficiency by use of variable displacement piston pumps.
Delivers precise positioning for easy operation in tight areas with 43 degree articulation in each direction.
Electro hydraulic controls increase productivity with responsive implements feature. Operate comfortably with easy-to-use soft-detent controls.
Variable displacement load sensing hydraulic piston pumps improve efficiency with new flow sharing implement and steering system.

LONG TERM VALUE AND DURABILITY

Designed and made with purpose-built structures to remain safe and durable for the long run.
Full box-section rear frame resists torsional shock and twisting forces.
Heavy-duty steering cylinder mounts efficiently conduct steering loads into the frame.
Axle mounting, lower hitch pin, frame plate, and bearing size have all been increased for longer life.

PERFORMANCE WITH LESS FUEL

Advanced Productivity Electronic Control System (APECS) delivers consistent, smooth shifting and efficiency through integrated electronic controls.
Strategic use of metallurgy and heat treating ensures long-life gears.
The Cat C18 engine is designed for maximum fuel efficiency and increased power density.
Two engine options are available to meet Tier 4 Final/Stage IV/Korea Tier 4 Final or Tier 3/Stage IIIA equivalent emission standards. (depending upon market).
Integrated systems intelligently lower working engine speeds and reduce overall system heat loads resulting in improved performance and fuel efficiency.
Engine idle shutdown reduces fuel waste during idling periods.
Delayed engine shutdown maximizes durability.

WHEEL TIPS BUILT TO PERFORM

New long-life Paddle and Plus design tip options.
Up to 40% longer life.
Purpose designed for Cat Landfill Compactors.
Improved machine performance.
Improved traction.
Longer wear life.
Four new wheel and tip configurations to meet your application: paddle tip for traction and fuel economy, plus tip for increased side-slope stability,combination of both to optimize performance in your conditions, or diamond tip for the longest life tip on the market and a reputation to match.

OPERATOR COMFORT AND CONTROL

Pressurized cab sits on isolation mounts improving comfort and reducing sound.
Cab features a convenient floor storage tray/lunch box.
Cat Comfort Series III Seat includes mid-back design, thick, contoured cushions, air suspension, six-way adjustments, and a seat-mounted implement pod and STIC steer that moves with the seat for optimal control.
Control panel gives operators the information and controls for safer and time-saving settings.
STIC control simplicity provides maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

PRODUCTIVITY WITH TECHNOLOGY

Cat Compaction Control system uses Machine Drive Power (MDP) technology to measure rolling resistance and correlates it with landfill compaction. 3D mapping indicates where to work and when layers are at optimum density. The system eliminates voids, optimizes cell space and documents results.
VisionLink 3D Project Monitoring provides managers with detailed compaction analysis to more effectively monitor and manage operations.
DETECT technologies help keep people and equipment safe by keeping operator aware of the work area and by monitoring and reporting unsafe conditions, like avoidance zones.
COMPACT technologies combine advanced compaction measurement, in-cab guidance and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes.
Rear vision camera greatly enhances visibility behind the machine to help the operator work with greater confidence and at peak potential while keeping people and assets safe.
Product Link is deeply integrated into your machine, giving you access to information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface. Helps effectively manage fleet and lower operating costs.

BUILT-IN SAFETY FEATURES

Railings, ladders and non-slip surfaces enhance technician and operator safety.
Rearview camera with in-cab monitor increases operator awareness around the machine.
Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
Low interior sound levels.
Pressurized cab with filtered air.
Engine and power train guards prevent trash build-up and shield components.
Front frame guards prevent trash build-up inside the frame and protects components and hydraulic lines.
Axle wrapping and seal guarding prevents material from wrapping and binding around the axles and assists when cleaning is needed.
Transmission oil tube is guarded to resist damage from debris.
The fuel tank is positioned away from the debris in the front frame and is easily accessed.
High radiator air inlet with screen helps prevent trash from entering the radiator area, maintaining proper airflow and aiding debris to fall off.
Striker bars and optional cleaner fingers are located in front and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel tips in maintaining good compaction.
In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel tips clean.
Roof extends past the cab doors and windows to minimize debris build up.
Suction fan allows ambient air to cool, enhancing cooling capacity. It also pressurizes the engine compartment, preventing trash build up.

REDUCE ENVIRONMENTAL IMPACT

More fuel efficient that previous model.
Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
The 836K is built to be rebuilt, maximizing machine life, and minimizing environmental impact. Get the most from your investment, with our sustainable options including Cat Reman and Certified Rebuild programs. With these programs, remanufactured components deliver cost savings of 40 to 70 percent, lowering operating costs while also reducing waste and minimizing the need for raw materials.

TOP-TIER SERVICE AND SUPPORT

Safe and convenient service via ground level or platform access to daily service points.
Ground level swing-out reversing fan for easy inspection and cleanout.
Swing-out doors on both sides of engine compartment provide easy access to daily service checks.
Ecology drains for ease of service and prevention of spills.
Reduce downtime with VIMS™ system notifications so operators and technicians can resolve problems before failure.
Sight gauges mean quick visual inspection and minimize fluid contamination.
Pressurized, temperature controlled engine compartment prevents small debris from entering and prevents extreme temperatures in the compartment.
Cat dealers keep you running with preventive maintenance programs, maintenance contracts, best-in-class parts availability and operator training support.

SPECIFICATIONS

Gross Power 419.0kW562.0hp
Net Power 370.0kW496.0hp
Engine Model C18 Cat®
Bore 145.0mm5.71in
Stroke 183.0mm7.2in
Displacement 18.1l1104.5in³
Low Idle Speed 750.0r/min750.0r/min
Gross - SAE J1349 419.0kW562.0hp
Rated Power (Net ISO 14396) 412.0kW553.0hp
Net Power - SAE J1349 - Converter Drive - Torque Rise 52.0%52.0%
Net Power - SAE J1349 - Converter Drive - Gross Power 370.0kW496.0hp
Maximum Altitude - Without Derating 2286.0m7500.0ft
Net Power - SAE J1349 - Direct Drive - Gross Power 370.0kW496.0hp
High Idle Speed 2120.0r/min2120.0r/min
Net Power - SAE J1349 - Direct Drive - Torque Rise 52.0%52.0%
Rated Power (Lab) 414.0kW555.0hp
Maximum Gross Torque - 1,300 rpm 3085.0N·m2275.0ft·lbf
Emissions Tier 4 Final/Stage IV/Korea Tier 4 Final or Tier 3/Stage IIIA equivalent
Travel Speed - Reverse - Converter 2nd 10.4km/h6.5mile/h
Travel Speed - Forward - Lockup 2nd 11.7km/h7.3mile/h
Travel Speed - Reverse - Lockup 2nd 12.3km/h7.6mile/h
Travel Speed - Forward - Lockup 1st 6.5km/h4.0mile/h
Transmission Type Cat Planetary Powershift
Travel Speed - Forward - Converter 1st 6.2km/h3.9mile/h
Travel Speed - Reverse - Converter 1st 6.5km/h4.0mile/h
Travel Speed - Forward - Converter 2nd 10.9km/h6.8mile/h
Travel Speed - Reverse - Lockup 1st 6.9km/h4.3mile/h
Steering System Double Acting – End Mounted
Stroke (1) 740.0mm29.1in
Bore (1) 127.0mm5.0in
Vehicle Articulation Angle 86°
Bore (2) 137.9mm5.5in
Maximum Supply Pressure 32000.0kPa4640.0psi
Stroke (2) 1021.0mm40.2in
Main Relief Pressure 24100.0kPa3495.0psi
Lift System Double Acting Cylinder
Pump Flow at 2,006 rpm 250.0l/min66.0gal/min
Hydraulic System Flow Sharing Implement
Front Planetary – Fixed
Rear Planetary – Oscillating
Oscillation Angle 13°
Parking Brake Spring Applied, Hydraulic Released
Control System Full Hydraulic Split Circuit
Fuel Tank 793.0l209.0gal (US)
Cooling System 107.0l28.0gal (US)
Crankcase 60.0l16.0gal (US)
Transmission 120.0l32.0gal (US)
Diesel Engine Fluid Tank (Tier 4 Final/Stage IV/Korea Tier 4 Final) 32.8l9.0gal (US)
Differential - Final Drives - Rear 190.0l50.0gal (US)
Differential - Final Drives - Front 186.0l49.0gal (US)
Hydraulic System - Tank Only 240.0l63.0gal (US)
Operating Weight 55927.0kg123319.0lb
Interior Sound Level - Standard 72.0dB(A)72.0dB(A)
Exterior Sound Level - Suppression 109.0dB(A)109.0dB(A)
Interior Sound Level - Suppression 71.0dB(A)71.0dB(A)
Exterior Sound Level - Standard 111.0dB(A)111.0dB(A)
Maximum Operating Weight (Tier 4 Final/Stage IV/Korea Tier 4 Final) - Multiple Blade and Wheel Offerings 55927kg123319lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) - Multiple Blade and Wheel Offerings 55617kg122615lb
Height - Top of Cab with A/C 4655.0mm15.27ft
Height - Top of Exhaust Pipe 4608.0mm15.12ft
Height - Top of Hood 3421.0mm11.22ft
Ground Clearance - Bumper 1029.0mm3.38ft
Centerline of Rear Axle to Edge of Counterweight 3187.0mm10.46ft
Hitch to Centerline of Front Axle 2275.0mm7.46ft
Wheel Base 4550.0mm14.93ft
Width - Over Wheels 4280.0mm14.04ft
Height - ROPS/Canopy 4284.0mm14.06ft
Height - Top of Cab with Strobe 4845.0mm15.9ft
Length - With Blade on Ground - Straight Blade 10182.0mm33.41ft
Turning Radius - Inside of Wheels 3635.0mm11.93ft
Ground Clearance 632.0mm2.07ft
Total Steering Angle 86 degrees
Steering Pressure Limited 24100kPa3495psi
Steering System - Circuit Steering Double Acting – End Mounted
Steering System - Pump Piston – Variable Displacement
Maximum Flow at × rpm 52 L/min @ 2,006 rpm
Diameter - With Tips 2125.0mm7.0ft
Drum Diameter 1770.0mm5.81ft
Drum Width 1400.0mm4.59ft
Tips per Wheel 40
Operating Weight - With Full Tank Capacities and U-Blade (Tier 3/Stage IIIA Equivalent) 55617kg122615lb
Operating Weight - With Full Tank Capacities and U-Blade (Tier 4 Final/Stage IV/Korea Tier 4 Final) 55927kg123319lb