160K Motor Grader

Equipment / NEW / Motor Graders / Motor Graders / 160K

METRIC

160K

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

TOOLS AND EXPERT HELP

PRODUCT BROCHURES AND DOWNLOADS

MEDIA GALLERY

KEY SPECS

Base Power (1st Gear) - Net 139kW186hp
Engine Model Cat C7
Displacement 7.2l439in³

Get a quote

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

PERFORMANCE AND PRODUCTIVITY

Cat C7 engine meets U.S. EPA Tier 3/EU Stage IIIA equivalent or Tier 2/Stage II equivalent emissions standards, depending on emission standards of specific country.
Power Shift Countershaft Transmission matched to engine, maximizing power to the ground.

POWERFUL EFFICIENCY

Electronic Throttle Control helps improve productivity by optimizing HP and torque to match the power demands of the application.
Aggressive blade angles, optimized moldboard curvature and large throat clearance allows material to roll more freely along blade, increasing efficiency.
Hydraulic demand fan automatically adjusts speed according to cooling requirements maximizing power to the ground and improving fuel efficiency.
Engine Idle Shutdown is available to shut down engine after a set period of time, saving fuel and helping reduce emissions.

SIMPLE TO OPERATE

Proportional Priority Pressure-Compensating (PPPC) provides load-sensing hydraulics with superior control, enhanced performance, and efficiency.
Optional AutoShift Transmission improves ease of operation and maximizes productivity by automatically shifting the transmission at optimal shift points.
Rocker and control switches are in easy reach.
Proven conventional controls provide industry-standard control pattern and feel for precise cutting edge movement.

SAVE MAINTENANCE TIME

Durable nylon composite wear inserts maximize circle torque and component life.
Sacrificial brass moldboard slide rail wear strips between blade mounting group and moldboard can be easily adjusted and replaced.
Left-side, ground level service area access speeds up maintenance and ensures that routine service is performed on time.

HEAVY DUTY CONSTRUCTION

Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
Components are designed and manufactured to Caterpillar quality standards throughout all Caterpillar facilities.

WORK IN COMFORT

Optional HVAC, defroster fan and sun shades keep you comfortable, while conveniently placed power ports keep additional communication devices charged and ready.

PRODUCTIVITY WITH TECHNOLOGY

Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
Optional Cat Product Link™ aids your equipment management with remote monitoring capabilities.
AccuGrade Attachment Ready Option (ARO) can be ordered as a factory or dealer installed option making installation of the AccuGrade grade control system faster and easier.

BUILT-IN SAFETY FEATURES

Brakes located at each tandem wheel offer the largest total brake surface area in the industry, delivering dependable stopping power.
Standard circle drive slip clutch protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object.
Ground level engine shutoff allows anyone nearby to shut the machine down in case of an emergency.
Built-in lock check valves.
Clear view to moldboard heel and tandem tires enhance productivity and safe operation.
Blade Lift Accumulators help absorb impact loads to the moldboard by allowing vertical blade travel.

SPECIFICATIONS

Base Power (1st Gear) - Net 139kW186hp
Engine Model Cat C7
Displacement 7.2l439in³
Bore 105mm4.1in
Stroke 127mm5in
High - Ambient Capability 50°C122°F
Note (2) Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Derating Altitude 3048m10000ft
Note (3) Maximum torque measured at 1,000 rpm in gears 4-8.
VHP Range - Net 139-154 kW (186-206 hp)
Torque Rise 46%
Number of Cylinders 6
Maximum Torque 1076N·m794ft-lb
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Operating Weight - Typically Equipped 39035kg17706lb
Blade Width 4.3m14ft
Arc Radius 413mm16.3in
Throat Clearance 90mm3.5in
End Bit - Thickness 16mm0.6in
End Bit - Width 152mm6.0in
Moldboard - Thickness 25mm1.0in
Cutting Edge Width 203mm8.0in
Moldboard - Height 686mm27.0in
Cutting Edge Thickness 16mm0.6in
Moldboard Sideshift - Right 943mm37.1in
Maximum Depth of Cut 790mm31.1in
Circle Centershift - Left 752mm29.6in
Moldboard Sideshift - Left 851mm33.5in
Maximum Lift Above Ground 452mm17.8in
Blade Tip Range - Forward 40°
Circle Centershift - Right 728mm28.7in
Maximum Shoulder Reach Outside of Tires - Right 2261mm89.0in
Blade Tip Range - Backward 5°
Maximum Shoulder Reach Outside of Tires - Left 2223mm87.5in
Front Axle - Wheel Lean - Left/Right 18°
Circle - Outer Diameter 1553mm61.1in
Front Axle - Total Oscillation per Side 32°
Gross Vehicle Weight - Base - Rear Axle 10726kg23646lb
Gross Vehicle Weight - Typically Equipped - Front Axle 5136kg11324lb
Gross Vehicle Weight - Typically Equipped - Total 17706kg39035lb
Gross Vehicle Weight - Base - Front Axle 4459kg9831lb
Gross Vehicle Weight - Base - Total 15185kg33477lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 12570kg27711lb
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.