US
METRIC
16
KEY SPECS
- Base Power (1st Gear) - Net 216kW
- Engine Model Cat® C13
- Bore 130mm
OVERVIEW
BENEFITS
-
Move more with less fuel
- Eco Mode saves fuel while maintaining productivity.
-
Maintain cross slope
- Cat Grade Control helps operator maintain desired cross slope.
-
Manage your fleet
- Cat MineStar helps manage your fleet to optimize quality and operating costs.
FEATURES AT A GLANCE
RELIABILITY YOU CAN COUNT ON
- Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.
- Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.
- C13 engine has been optimized to be as efficient without compromising performance. Eco mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible, offering additional fuel savings.
- Center shift section of the front frame is a heavy-duty steel casting improving stress distribution for enhanced durability.
- Rear frame structure is lengthened providing easy access to components in the engine enclosure as well as improved machine balance.
- Front axle steering cylinder enhances durability and hydraulic lines are routed to improve reliability.
- Modular cooling package provides simple removal and installation of components on the cooling system reducing service time.
- Engine enclosure doors provide complete access to the engine without any enclosure post.
- Extended maintenance intervals reduce the number of touches and downtime.
- Fluid monitoring systems help prevent critical components from damage when levels are low.
- Information Display in cab shows service/maintenance concerns and diagnostic codes are logged.
PERFORMANCE AND PRODUCTIVITY
- Motor graders have a direct impact on how productively all other mining machines operate – in particular in their role in haul road maintenance. The 16is optimized exactly to this goal:
- Additional weight along with adjusted weight balance offers enhanced performance improving traction and the ability to keep ground speed, especially when carrying a large load.
- Available with three variations of the C13 engine depending upon sales region.
- Emissions reduction technology is transparent, with no action required from the operator.
- Multi-color / touch screen information display is the operator's gateway to monitoring machine performance and provides convenient way of modifying machine parameters to tailor performance to the current task. Assist in providing service information for troubleshooting.
- Cat Product Link™ Elite integrates into the machine, taking guesswork out of equipment management. Provides easy access to machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface helping you manage your fleet and operating costs.
- Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.
ENSURING A SAFE JOB SITE
- Caterpillar considers the safety of everyone in, on or around Cat equipment when developing products or enhancing safety features.
- The 16has safety features including -
- Access to Tandem
- Rear View Camera
- Seat Belt Indicator
- Access Platform – optional
- Service Access Platform – optional
- Fire Suppression Ready System – optional
TOP-TIER SERVICE AND SUPPORT
- Cat dealers are committed to helping you succeed, ensuring you have the right machine for the job, making parts available, operator training and providing a wide range of versatile work tools.
SPECIFICATIONS
- Base Power (1st Gear) - Net 216kW
- Engine Model Cat® C13
- Bore 130mm
- Stroke 157mm
- Speed at Rated Power 2,000 rpm
- Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 3711m
- Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1721N·m
- Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1771N·m
- Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1721N·m
- Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
- Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43%
- Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39%
- Standard - Ambient Capability 50°C
- Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 3954m
- VHP Range - Net - Metric 216-259 kW (294-353 hp)
- Base Power (1st Gear) - Net - Metric 216kW
- Standard - Fan Speed - Minimum 550 rpm
- Standard - Fan Speed - Maximum 1,450 rpm
- Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
- Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39%
- Emissions (1) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
- VHP Range - Net 216-259 kW (290-348 hp)
- Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 3810m
- Displacement 12.5l
- Number of Cylinders 6
- Operating Weight - Typically Equipped 32411kg
- Forward/Reverse Gears 8 Forward/6 Reverse
- Transmission Direct drive, power shift, countershaft
- Brakes - Dynamic Brake Torque per Wheel 36701N·m
- Brakes - Secondary Oil-actuated, oil-disc
- Brakes - Service Oil-actuated, oil disc
- Brakes - Parking Spring applied, hydraulically released
- Blade Width 4.9m
- Circuit Type Electro-hydraulic load sensing, closed center
- Pump Type Variable piston
- Maximum System Pressure 24750kPa
- Standby Pressure 5900kPa
- Pump Output* 280l/min
- Note *Pump output measured at 2,150 rpm.
- Steering Range - Left/Right 47.5°
- Forward - 6th 25.8km/h
- Forward - 4th 12.3km/h
- Forward - 5th 19km/h
- Turning Radius - Outside Front Tires 9.3m
- Forward - 7th 35.5km/h
- Top Speed - Forward 51.7km/h
- Forward - 3rd 8.9km/h
- Reverse - 6th 40.8km/h
- Reverse - 5th 28km/h
- Reverse - 2nd 6.6km/h
- Reverse - 3rd 9.7km/h
- Forward - 8th 51.7km/h
- Reverse - 1st 3.6km/h
- Forward - 1st 4.5km/h
- Top Speed - Reverse 40.8km/h
- Forward - 2nd 6.1km/h
- Reverse - 4th 15km/h
- Articulation Angle - Left/Right 20°
- Fuel Capacity 496l
- Cooling System 70l
- DEF Tank 16l
- Hydraulic System - Total 146l
- Hydraulic System - Tank 70l
- Engine Oil 36l
- Transmission - Differential - Final Drives 98.5l
- Tandem Housing - Each 129l
- Front Wheel Spindle Bearing Housing 0.9l
- Circle Drive Housing 10l
- Front Frame Structure - Height 460mm
- Front Frame Structure - Width 356mm
- Drawbar - Width 76mm
- Drawbar - Height 203mm
- Front Axle - Total Oscillation per Side 35°
- Circle - Diameter 1822mm
- Circle - Blade Beam Thickness 50mm
- Front Frame Structure - Thickness 14mm
- Front Axle - Wheel Lean 18° Left/17° Right
- Front Axle - Height to Center 670mm
- Tandem Oscillation - Front Up 15°
- Sidewall Thickness - Outer 22mm
- Sidewall Thickness - Inner 22mm
- Tandem Oscillation - Front Down 25°
- Height 648mm
- Width 236mm
- Drive Chain Pitch 63.5mm
- Wheel Axle Spacing 1841mm
- Arc Radius 413mm
- Throat Clearance 126mm
- Thickness 25mm
- End Bit - Width 152mm
- Blade Pull* - Base GVW 18615kg
- Cutting Edge Width 203mm
- Cutting Edge Thickness 25mm
- Down Force - Maximum GVW 19895kg
- Height 787mm
- Width 4.9m
- Down Force - Base GVW 13945kg
- Blade Pull* - Maximum GVW 23985kg
- End Bit - Thickness 19mm
- Maximum Blade Position Angle 65°
- Maximum Lift Above Ground 400mm
- Maximum Depth of Cut 470mm
- Maximum Shoulder Reach Outside of Tires - Right 2311mm
- Moldboard Sideshift - Left 740mm
- Circle Centershift - Right 560mm
- Circle Centershift - Left 690mm
- Moldboard Sideshift - Right 790mm
- Maximum Shoulder Reach Outside of Tires - Left 2311mm
- Blade Tip Range - Forward 40°
- Blade Tip Range - Backward 5°
- Ripping Depth - Maximum 452mm
- Shank Holder Spacing - Minimum 445mm
- Ripper Shank Holders 7
- Penetration Force 13749kg
- Pry-Out Force 19822kg
- Machine Length Increase, Beam Raised 1610mm
- Gross Vehicle Weight - Maximum Tested - Total 38500kg
- Gross Vehicle Weight - Base** - Total 28816kg
- Gross Vehicle Weight - Typically Equipped - Rear Axle 23678kg
- Gross Vehicle Weight - Typically Equipped - Total 32411kg
- Gross Vehicle Weight - Maximum Tested - Front Axle 11850kg
- Gross Vehicle Weight - Typically Equipped - Front Axle 8733kg
- Gross Vehicle Weight - Maximum Tested - Rear Axle 26650kg
- Gross Vehicle Weight - Base** - Front Axle 8134kg
- Gross Vehicle Weight - Base** - Rear Axle 20682kg
- Ground Clearance - Rear Axle 396mm
- Length - Counterweight to Ripper 12051mm
- Length - Front Axle to Moldboard 3066mm
- Length - Front Axle to Mid Tandem 7365mm
- Height - Top of Cylinders 3088mm
- Width - Tire Center Lines 2703mm
- Width - Outside Rear Tires 3411mm
- Length - Between Tandem Axles 1841mm
- Height - Top of Cab 3719mm
- Width - Outside Front Tires 3411mm
- Height - Front Axle Center 733mm
- Length - Front Tire to Rear of Machine - Including Tow Hitch 10593mm
- Height - Exhaust Stack 3557mm
- Steering ISO 5010:2007
- Brakes ISO 3450:2011
- Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
- ROPS/FOPS ISO 3471:2008/ISO 3449:2005
- Gear - Reverse 3rd-6th 222kW
- Gear - Forward 8th 259kW
- Gear - Forward 4th 227kW
- Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star
- Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
- Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star
- Gear - Reverse 1st 216kW
- Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
- Gear - Forward 3rd 222kW
- Gear - Forward 3rd 222kW
- Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star
- Gear - Reverse 3rd-6th 222kW
- Gear - Reverse 2nd 216kW
- Gear - Forward 7th 244kW
- Gear - Forward 6th 239kW
- Gear - Forward 6th 239kW
- Gear - Forward 8th 259kW
- Gear - Forward 5th 232kW
- Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
- Gear - Reverse 1st 216kW
- Gear - Reverse 2nd 216kW
- Gear - Forward 1st 216kW
- Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
- Gear - Forward 4th 227kW
- Gear - Forward 5th 232kW
- Gear - Forward 7th 244kW
- Gear - Forward 1st 216kW
- Gear - Forward 2nd 216kW
- Gear - Forward 2nd 216kW
- Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star
- Shank Holder Spacing - Maximum 500mm
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
- Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5
- Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.
- Note Calculated with no slip and 23.5 R25 L-3 tires.
- Optimized VHP Range - Net 216-259 kW (290-348 hp)
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
160 LVR
Motor Graders
- Base Power (1st Gear) - Net139kW
- Engine ModelCat C7
- Displacement7.2l
140 LVR
Motor Graders
- Base Power (1st Gear) - Net128kW
- Engine ModelCat C7
- Displacement7.2l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
