816K Landfill Compactor

Equipment / NEW / Compactors / Landfill Compactors / 816K

METRIC

816K

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

TOOLS AND EXPERT HELP

PRODUCT BROCHURES AND DOWNLOADS

MEDIA GALLERY

KEY SPECS

Gross Power 212kW284hp
Net Power 185kW248hp
Engine Model Cat® C7.1: configured for two emissions options

Get a quote

FIND A DEALER

OVERVIEW

FEATURES AT A GLANCE

POWERFUL EFFICIENCY

Advanced Productivity Electronic Control System (APECS) delivers improved transmission shifting performance and a higher level of comfort for operators.
Decelerator pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. Allows the operator to slow speeds when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button.
Electro hydraulic controls increase productivity with responsive implements feature. Operate comfortably with easy-to-use soft-detent controls.
Steering System provides confident machine operation and precise control enabled by the 815K's load sensing hydraulic steering system.
Increased efficiency with variable displacement piston pumps that give operators precise positioning for easy maneuvering in tight areas with 42 degree articulation in each direction.
Steering and Transmission Integrated Control System (STIC™) enhances operator comfort by integrating steering and transmission control functions in a single lever. Includes finger-controlled gear selection.

LONG TERM VALUE AND DURABILITY

Designed and made with purpose-built structures to remain safe and durable for the long run.
Long-life-designs, materials and robotic welding ensure multiple life cycles and ability to withstand the toughest conditions.
Full box-section rear frame resists torsional shock and twisting forces.
Heavy-duty steering-cylinder mounts efficiently conduct steering loads into the frame.

PERFORMANCE WITH LESS FUEL

Advanced Productivity Electronic Control System (APECS) delivers consistent, smooth shifting and efficiency through integrated electronic controls.
Strategic use of metallurgy and heat treating ensures long-life gears.
The Cat C7.1 engine is designed for maximum fuel efficiency and increased power density.
Two engine options are available to meet Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent emission standards. (depending upon market).
Engine features innovative Cat electronics, fuel injection process, air-management systems, aftertreatment solution with Cat selective catalytic reduction.
Integrated systems intelligently lower working engine speeds and reduce overall system heat loads resulting in improved performance and fuel efficiency.
Next generation fuel injection systems control fuel metering through a series of carefully timed microbursts providing cleaner combustion and the most efficient fuel burn.

WHEEL TIPS BUILT TO PERFORM

New long-life Paddle and Plus design tip options.
Up to 40% longer life.
Purpose designed for Cat Landfill Compactors.
Improved machine performance.
Improved traction.
Select Paddle Tip for traction and fuel economy.
Select Plus Tip for increased side-slope stability.
Select combination of both to optimize performance in your conditions.

OPERATOR COMFORT AND CONTROL

Pressurized cab sits on isolation mounts improving comfort and reducing sound.
Cab features a convenient floor storage tray/lunch box.
Cat Comfort Series III Seat includes mid-back design, thick, contoured cushions, air suspension, six-way adjustments, and a seat-mounted implement pod and STIC steer that moves with the seat for optimal control.
Control Panel gives operators the information and controls for safer and time-saving settings.
STIC control simplicity provides maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

PRODUCTIVITY WITH TECHNOLOGY

Cat Compaction Control system uses Machine Drive Power (MDP) technology to measure rolling resistance and correlates it with landfill compaction. 3D mapping indicates where to work and when layers are at optimum density. The system eliminates voids, optimizes cell space and documents results.
VisionLink 3D Project Monitoring provides managers with detailed compaction analysis to more effectively monitor and manage operations.
DETECT technologies help keep people and equipment safe by keeping operator aware of the work area and by monitoring and reporting unsafe conditions like avoidance zones.
COMPACT technologies combine advanced compaction measurement, in-cab guidance and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and with fewer passes.
Product Link is deeply integrated into your machine, giving you access to information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface. Helps effectively manage fleet and lower operating costs.

BUILT-IN SAFETY FEATURES

Railings, ladders and non-slip surfaces enhance technician and operator safety.
Rearview camera with in-cab monitor increases operator awareness around the machine.
Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
Low interior sound levels.
Pressurized cab with filtered air.
Engine and power train guards prevent trash build-up and shield components.
Front frame guards prevent trash build-up inside the frame and protects components and hydraulic lines.
Axle wrapping and seal guarding prevents material from wrapping and binding around the axles and assists when cleaning is needed.
Transmission oil tube is guarded to resist damage from debris.
The fuel tank is positioned away from the debris in the front frame and is easily accessed.
High radiator air inlet with screen helps prevent trash from entering the radiator area, maintaining proper airflow and aiding debris to fall off.
Striker bars and optional cleaner fingers are located in front and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel tips in maintaining good compaction.
In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel tips clean.
Roof extends past the cab doors and windows to minimize debris build up.
Suction fan allows ambient air to cool, enhancing cooling capacity. It also pressurizes the engine compartment, preventing trash build up.

REDUCE ENVIRONMENTAL IMPACT

Engine Idle Shutdown saves fuel by avoiding unnecessary idling.
Reduce waste to the environment with maintenance-free batteries.
To assist with maximizing machine life, the Cat 816K is built for multiple lives and is one of our most rebuilt products. To get the most value from your investment, Caterpillar offers sustainable options including Cat Reman and Certified Rebuild programs. With these programs, remanufactured components deliver cost savings of 40 to 70 percent, lowering operating costs while also reducing waste and minimizing the need for raw materials.

TOP-TIER SERVICE AND SUPPORT

Safe and convenient service via ground level or platform access to daily service points.
Swing-out doors on both sides of engine compartment provide easy access to daily service checks.
Ecology drains for ease of service and prevention of spills.
Reduce downtime with VIMS™ system notifications so operators and technicians can resolve problems before failure.
Sight gauges mean quick visual inspection and minimize fluid contamination.
Hydraulic oil cooler, air conditioner condenser, and fuel cooler grouped for easy access.
Side access doors allow convenient cleanout of cooling package.
New ground level service area includes a Master Disconnect Switch with integrated lock-out/tag-out, DEF purge lamp (Tier 4 Final/Stage IV machines only), circuit breakers, emergency fuel shutoff switch and the jump start receptacle.
Centralized grease points speed maintenance.
Cat dealers keep you running with preventive maintenance programs, maintenance contracts, best-in-class parts availability and operator training support.

SPECIFICATIONS

Gross Power 212kW284hp
Net Power 185kW248hp
Engine Model Cat® C7.1: configured for two emissions options
Bore 105mm4.1in
Stroke 135mm5.3in
Displacement 7.01l427.8in³
High Idle Speed 2270r/min2270r/min
Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent 186kW249hp
Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV 1219N·m899lb/ft
Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV 185kW248hp
Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent 186kW249hp
Gross Power - ISO 14396 - Tier 4 Final/Stage IV 204kW274hp
Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent 213kW286hp
Rated Power (SAE J1349) - Tier 4 Final/Stage IV 185kW248hp
Gross Power - SAE J1995 - Tier 4 Final/Stage IV 212kW284hp
Low Idle Speed 800r/min800r/min
Emissions Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Travel Speeds - Forward - Second 10.9km/h6.8mile/h
Travel Speeds - Reverse - First 7.0km/h4.3mile/h
Transmission Type Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
Travel Speeds - Forward - First 6.1km/h3.8mile/h
Travel Speeds - Reverse - Second 12.5km/h7.8mile/h
Pump Flow at 2,111 rpm 89l/min23.5gal/min
Maximum Supply Pressure 20200kPa2930psi
Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in)
Main Relief Pressure 22000kPa3190psi
Front Planetary – Fixed
Rear Planetary – Oscillating
Oscillation Angle ±6°
Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only) 16l4.2gal (US)
Differential - Final Drives - Rear 43l11.4gal (US)
Engine Crankcase 20l5.28gal (US)
Fuel Tank 500l132.1gal (US)
Differential - Final Drives - Front 43l11.4gal (US)
Hydraulic Tank Only 75l19.8gal (US)
Transmission 56l14.8gal (US)
Cooling System - Tier 4 Final/Stage IV 81l21.4gal (US)
Operating Weight 25809kg56899lb
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent 112dB(A)112dB(A)
Operator Sound Level - ISO 6396 70dB(A)70dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV 111dB(A)111dB(A)
Operator Sound Level - ISO 6396 71dB(A)71dB(A)
Maximum Operating Weight (Tier 4 Final/Stage IV) 25809kg56899lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 25541kg56308lb
Height - Top of Exhaust Pipe 3497mm11.5ft
Height - Top of Hood 2720mm8.9ft
Ground Clearance - Bumper 818mm2.7ft
Hitch to Centerline of Front Axle 1675mm5.5ft
Wheel Base 3350mm11.0ft
Width - Over Wheels 3338mm131.4ft
Overall Length - Maximum 8058mm26.4ft
Outside Turning Radius - Blade 6473mm21.2ft
Height - Cab Roof 3878mm12.7ft
Height - Top of Beacon 4368mm14.3ft
Inside Turn Radius - Wheels 2700mm8.9ft
Inside Turn Radius - Blade 2910mm9.5ft
Centerline of Rear Axle to Bumper 1990mm6.5ft
Ground Clearance 516mm1.7ft
Bore 101.6mm4.0in
Steering Pressure Limited 27600kPa4003psi
Vehicle Articulation Angle 84°84°
Stroke 597mm23.5in
Steering System - Pump Piston – Variable Displacement
Steering System - Circuit Closed Center Load Sensing
Maximum System Flow 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Torque Rise 52%52%
Paddle Tips - Tip Height 159mm6.25in
Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent 1016N·m749lb/ft
Paddle Tips - Drum Diameter 1400mm55.1in
Paddle Tips - Width over Drums 3338mm131.4in
Paddle Tips - Outside Diameter 1717mm67.6in
Plus Tips - Outside Diameter 1717mm67.6in
Plus Tips - Drum Width 1016mm40.0in
Width - Moldboard Length 3580mm11.75ft
Combo Wheels - Replaceable Welded
Plus Tips - Tips per Row 5
Plus Tips - Drum Diameter 1400mm55.1in
Combo Wheels - Weight (Group) 6148kg13554lb
Combo Wheels - Outside Diameter 1717mm67.6in
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent 110dB(A)110dB(A)
Maximum Lift Above Ground 1140mm3.7ft
Height - Including Cutting Edge and Screen 1961mm6.4ft
Paddle Tips - Weight (Group) 5954kg13126lb
Paddle Tips - Tips per Row 5
Combo Wheels - Tips per Wheel 20
Plus Tips - Replaceable Welded
Maximum Altitude - Without Derating 3000m9842.52ft
Combo Wheels - Drum Diameter 1400mm55.1in
Paddle Tips - Drum Width 1016mm40.0in
Plus Tips - Width over Drums 3338mm131.4in
Plus Tips - Tip Height 159mm6.25in
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV 109dB(A)109dB(A)
Combo Wheels - Drum Width 1016mm40.0in
Width - Over End Bits 3656mm12.0ft
Combo Wheels - Tip Height 159mm6.25in
Plus Tips - Weight (Group) 6342kg13982lb
Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent 205kW275hp
Maximum Depth of Cut 362mm1.2ft
Paddle Tips - Tips per Wheel 20
Plus Tips - Tips per Wheel 20
Cooling System - Tier 3/Stage IIIA Equivalent 73l19.3gal (US)
Combo Wheels - Width over Drums 3338mm131.4in
Combo Wheels - Tips per Row 5
Paddle Tips - Replaceable Welded
Note All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.