Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER
INDUSTRIAL
OIL AND GAS
.png)
RENTALS
.png)
AFTERMARKET
US
METRIC
735
KEY SPECS
- Engine Model Cat® C13A
- Gross Power (SAE J1995) 306kW
- Net Power (SAE J1349) 298kW
OVERVIEW
BENEFITS
-
RELIABLE PERFORMANCE
- The redesigned dump body provides easier loading and maximum payload, while the C13A engine delivers the power you require, combined with relentless reliability.
-
BUILT-IN SAFETY
- Designed for safe and convenient access with ground level service, and Dynamic Rollover Protection applies brakes when needed to help reduce the risk of rollovers.
-
IMPROVED OPERATOR EFFICIENCY
- Easily set job parameters with Body Height and Machine Speed Limiting, while improving operating behavior with optional Operator Coaching.
FEATURES AT A GLANCE
PROVEN RELIABILITY
LONG TERM VALUE AND DURABILITY
ACHIEVE GREATER PRODUCTIVITY
POWERFUL EFFICIENCY
WORK IN COMFORT
TECHNOLOGY THAT GETS WORK DONE
BUILT-IN SAFETY FEATURES
LOWER MAINTENANCE COSTS
SPECIFICATIONS
- Engine Model Cat® C13A
- Gross Power (SAE J1995) 306kW
- Net Power (SAE J1349) 298kW
- Engine Power (ISO 14396) 301kW
- Bore 130mm
- Stroke 157mm
- Displacement 12.5l
- Note (1) Advertised power is tested at 1,800 rpm.
- Note (2) Advertised power is tested per the specified standard in effect at the time of manufacture.
- Note (3) Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
- Note (4) Net power when the fan is at maximum speed is 298 kW (400 hp) per the SAE reference conditions.
- Note (5) Two engine emission options are available: 1. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 2. Noncertified configuration that is equivalent to U.S. EPA Tier 2 and EU Stage II.
- No Engine De-rating Below 3810m
- Peak Engine Torque Gross (SAE J1995) 2192N·m
- Peak Engine Torque Net (SAE J1349) 2155N·m
- Peak Engine Torque Speed 1200r/min
- Rated Payload 32t
- Heaped (SAE 2:1) 20m³
- Struck 16m³
- Tailgate Heaped SAE 2:1 21.7m³
- Tailgate Struck 17m³
- Forward - 1 8km/h
- Forward - 2 15km/h
- Forward - 3 23km/h
- Forward - 4 35km/h
- Forward - 5 48km/h
- Forward - 6 57km/h
- Reverse - 1 9km/h
- Interior Cab 72dB(A)
- Note (1) The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
- Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
- Front Axle - Empty 14580kg
- Center Axle - Empty 5110kg
- Rear Axle - Empty 4890kg
- Total - Empty 24580kg
- Front Axle - Rated Load 4054kg
- Center Axle - Rated Load 13973kg
- Rear Axle - Rated Load 13973kg
- Total - Rated Load 32000kg
- Front Axle - Loaded 18634kg
- Center Axle - Loaded 19083kg
- Rear Axle - Loaded 18863kg
- Total - Loaded 56580kg
- Type High strength Brinell HB450 wear resistant steel
- Front Plate 7mm
- Base Plate 13mm
- Side Plates 11mm
- Fuel Tank 400l
- Cooling System 83l
- Hydraulic System 110l
- Engine Crankcase 38l
- Transmission 56l
- Final Drives/Differential 125l
- Output Transfer Gear Box 25l
- Raise Time 12s
- Lower Time 11s
- Brakes ISO 3450 – 2011
- Cab - FOPS ISO 3449 Level II – 2005
- Cab - ROPS ISO 3471 – 2008
- Steering ISO 5010 – 2019
- Turning Dimensions - Steer Angle - Left/Right 45°
- Turning Dimensions - SAE Turning Radius 7470mm
- Turning Dimensions - Clearance Radius 8075mm
- Turning Dimensions - Inside Radius 3793mm
- Turning Dimensions - Aisle Width 5393mm
- Note Dimensions are for machines equipped with 750/65 R25 tires.
- Lock to Lock 4.75 seconds @ 60 rpm
- Hydraulic Excavators: 350/352 - Passes 4-5
- Hydraulic Excavators: 336 - Passes 5-6
- Wheel Loaders: 972/972 XE - Passes 3-4
- Wheel Loaders: 966/966 XE - Passes 4
- Wheel Loader: 962 - Passes 4-5
- Wheel Loader: 950 - Passes 5
- Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
745
Articulated Trucks
- Engine ModelCat® C18
- Gross Power (SAE J1995)381kW
- Net Power (SAE J1349)370kW
730
Articulated Trucks
- Engine ModelCat® C13A
- Gross Power (SAE J1995)280kW
- Net Power (SAE J1349)274kW
730 EJ
Articulated Trucks
- Engine ModelCat® C13A
- Gross Power (SAE J1995)280kW
- Net Power (SAE J1349)274kW
735
Articulated Trucks
- Engine ModelCat® C13A
- Gross Power (SAE J1995)306kW
- Net Power (SAE J1349)298kW
740 GC
Articulated Trucks
- Engine ModelCat® C15
- Gross Power (SAE J1995)335kW
- Net Power (SAE J1349)324kW
730
Articulated Trucks
- Engine ModelCat® C13
- Gross Power (SAE J1995)280kW
- Net Power (SAE J1349)274kW
730 EJ
Articulated Trucks
- Engine ModelCat® C13
- Gross Power (SAE J1995)280kW
- Net Power (SAE J1349)274kW
735
Articulated Trucks
- Engine ModelCat® C13
- Gross Power (SAE J1995)306kW
- Net Power (SAE J1349)298kW
MEDIA GALLERY
