Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER
INDUSTRIAL
OIL AND GAS
.png)
RENTALS
.png)
AFTERMARKET
US
METRIC
D3
OVERVIEW
BENEFITS
-
Easy to Operate
- GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
-
Up to 10% Lower Total Ownership Cost
- with improved fuel economy, long undercarriage life and easy maintenance.
-
Up to 15% More Performance
- with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
FEATURES AT A GLANCE
IMPROVED VISIBILITY
- New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.
GRADE TECHNOLOGY
-
Cat small dozers include a suite of Operator Assist features that work seemlessly to save time, effort, fuel, machine wear and overall costs. Cat Grade with Assist is an optional technology available for small dozers.
- Steer Assist automates track steering with light or heavy loads and automates blade tilt steering to help push heavy loads with less effort. This feature helps reduce operator inputs by up to 75% and enhances operator efficiency and productivity. Steer Assist is standard with Assist with Attachment Ready Option (ARO). Steer Assist 3D is standard with Grade 3D with Assist.
- Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements. Stable Blade Lift and Tilt is standard with Assist with ARO and Grade 3D with Assist.
- Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available. Blade Load Monitor is standard with Assist with ARO and Grade 3D with Assist.
- Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed. Traction Control is standard with Assist with ARO and Grade 3D with Assist
- AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available. AutoCarry is standard with Assist with ARO and Grade 3D with Assist.
- Scalable Grade 2D and 3D with Assist is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
UP TO 10% IMPROVED FUEL ECONOMY
- The D3 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.
COMFORTABLE WORK SPACE
- The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.
BIGGER, BETTER DISPLAY WITH CAMERA
- This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.
DURABLE UNDERCARRIAGE
- The D3 is available with either a Heavy Duty (HD) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
SPECIFICATIONS
- Engine Model Cat® C3.6
- Power - Net 77.6kW
- Displacement 3.6l
- Net Power - 2,200 rpm - SAE J1349 77.6kW
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 77.6kW
- Power Train Hydrostatic
- Note (2) Engine equivalent to Tier 3 emission standards.
- Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Operating Weight 9362kg
- Operating Weight - LGP 9693kg
- Operating Weight - LGP, 762 mm/30 in 9893kg
- Note (2) For machine with ripper, add 554 kg (1,222 lb).
- Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- ROPS ISO 3471:2008
- FOPS ISO 3449:2005 Level II
- Drive Pumps 1
- Maximum Travel Speed - Reverse 10km/h
- Relief Valve Settings 48500kPa
- Track Motors 2
- Maximum Travel Speed - Forward 9km/h
- Track Gauge - LGP, 762 mm (30 in) 1860mm
- Shoe Width - LGP 660mm
- Shoe Width - Standard 510mm
- Ground Pressure - LGP 31.2kPa
- Track Gauge - LGP 1750mm
- Length - Track on Ground - LGP 2310mm
- Number of Rollers - Each Side 7
- Length - Track on Ground - LGP, 762 mm (30 in) 2310mm
- Ground Pressure - LGP, 762 mm (30 in) 27.2kPa
- Track Gauge 1600mm
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
- Shoe Width - LGP, 762 mm (30 in) 762mm
- Ground Pressure 38.9kPa
- Length of Track on Ground 2310mm
- Number of Shoes - Each Side - Abrasion Undercarriage 36
- Transmission - Hydraulic Tank 90l
- Fuel Tank 195l
- Crankcase - With Filter 10.5l
- Final Drive - Each - LGP 10l
- Cooling System 19l
- Final Drives - Each Side 10l
- Pump Output 65L/min
- Relief Valve Settings 20600kPa
- Type Parallelogram
- Number of Shanks 3
- Height 165mm
- Weight 554kg
- Maximum Ground Clearance Under Tip 448mm
- Maximum Reach - Ground Line 766mm
- Maximum Digging Depth 337.5mm
- Overall Width 1710mm
- Weight 610kg
- Winch Drive Hydrostatic
- Control Hydraulic
- Speed Variable
- Drum Diameter 254mm
- Throat Clearance 171.5mm
- Maximum Line Pull - Full Drum 11340kg
- Winch Length 705mm
- Drum Capacity - Recommended Cable 113m
- Rope Diameter - Recommended 16mm
- Drum Capacity - Optional Cable 78m
- Overall Width 741mm
- Rope Diameter - Optional 19mm
- Maximum Line Speed - Bare Drum 40m/min
- Maximum Line Speed - Full Drum 63m/min
- Maximum Line Pull - Bare Drum 18144kg
- Drum Width 274mm
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
- BLADE: Digging Depth - LGP 590mm
- Track Gauge - LGP 1750mm
- BLADE: Blade Height - LGP 1010mm
- BLADE: Blade Capacity (SAE) - LGP 2.34m³
- BLADE: Blade Lift Height - LGP 767mm
- Overall Length - With Blade - LGP 4309mm
- BLADE: Maximum Tilt - LGP 448mm
- BLADE: Blade Width - LGP 3220mm
- Track Gauge - LGP, 762 mm (30 in) 1860mm
- Ground Clearance - LGP, 762 mm (30 in) 332mm
- BLADE: Maximum Angle (either side) - LGP 25°
- Ground Clearance - LGP 332mm
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
- Overall Length - With Blade - LGP, 762 mm (30 in) 4309mm
- BLADE: Blade Width at Maximum Angle - LGP 2940mm
- BLADE: Blade Width at Maximum Angle - Standard 2636mm
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58°
- BLADE: Maximum Angle (either side) - Standard 25°
- Note Abrasion Undercarriage
- BLADE: Blade Height - Standard 1073mm
- BLADE: Digging Depth - Standard 605mm
- BLADE: Maximum Tilt - Standard 402mm
- BLADE: Blade Capacity (SAE) - Standard 2.19m³
- Overall Length - With Blade - Standard 4337mm
- Track Gauge - Standard 1600mm
- Ground Clearance - Standard 332mm
- BLADE: Blade Width - Standard 2782mm
- BLADE: Blade Lift Height - Standard 767mm
- Width of Dozer (standard shoes, no blade) - LGP 2360mm
- Width of Dozer (standard shoes, no blade) - Standard 2110mm
- Length of Basic Dozer (without blade) - Standard 3270mm
- Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 3270mm
- Dozer Height - LGP 2769mm
- Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 2630mm
- Dozer Height - Standard 2769mm
- Length of Basic Dozer (without blade) - LGP 3270mm
- Dozer Height - LGP, 762 mm (30 in) 2769mm
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
D11
Dozers
- Engine ModelCat® C32B
- Engine Power - Net SAE J1349/ISO 9249 - Forward634kW
- Displacement32.1l
D6 GC
Dozers
- Engine ModelCat 3306B DIT
- Power - Net158kW
- Net Power - Rated - ISO 9249/SAE J1349158kW
D7
Dozers
- Engine ModelCat C9.3B
- Power - Net197kW
- EmissionsBrazil MAR-1 and UN ECE R96 Stage IIIA emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA
D8 GC
Dozers
- Engine ModelCat 3406C
- Net Power - Rated - ISO 9249/SAE J1349226kW
- Net Power - Rated - ISO 9249/SAE J1349 (DIN)307mhp
MEDIA GALLERY
