C2.8 industria

  • Compression Ratio 17.0:1
  • Aspiration Turbocharged (T) and Turbocharged Aftercooled (TA)
  • Bore 90 mm (3.5 in)

SPECIFICATIONS

  • Compression Ratio 17.0:1
  • Aspiration Turbocharged (T) and Turbocharged Aftercooled (TA)
  • Bore 90 mm (3.5 in)
  • Displacement 2.8 L (171 in³)
  • Stroke 110 mm (4.3 in)
  • Width 561 mm (22.1 in)
  • Height 766 mm (30.2 in)
  • Emissions U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU)
  • Rotation From Flywheel End Counterclockwise
  • Rated Speed 2200-2500 rpm
  • Minimum Power 55 bkW74 BHP
  • Maximum Power 55 bkW74 BHP
  • Engine Configuration Inline 4, 4-Stroke-Cycle Diesel
  • Lube System Refill 4 L (1.06 qt)
  • Combustion System Direct Injection
  • Weight Net Dry Basic Operating Engine Without Optional Attachments 245 kg (450 lb)
  • Length Rear Of Flywheel Housing To Front Of Fan Pulley 635 mm (25 in)
  • Industry industrial

EQUIPMENT

C2.8 Standard Equipment

  • Air Inlet System
    • Induction manifolds
    • Exhaust manifolds
  • Control System
    • Starter motor (12V or 24V)
    • Alternator (12V or 24V)
    • Electronic Control Unit (chassis mounted)
    • Engine control sensors and robust wiring harness
    • Data interface via CANbus J1939
  • Flywheels and Flywheel Housing
    • Flywheel housings – SAE 3 or SAE 4
    • Choice of flywheel to match industry common hydraulic pumps and transmissions
    • Side PTO with SAE A or SAE B interface
  • Fuel System
    • Fuel filter – preconnected but chassis mounted
    • With water sensor
  • Lube System
    • Lubricating oil filters
    • High incline oil pan – 35° continuous in all directions
  • General
    • Cold start capability to -20° C (-4° F) with standard equipment
    • Paint: Caterpillar yellow, with optional colors available at request

360° INTERACTIVE

Exterior

Interior

RELATED PRODUCTS

3406C - Industrial

3406C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled
  • Bore: 137.2 mm (5.4 in)
Get a quote
3412C - Industrial

3412C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 137.2 mm (5.4 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
C18 ACERT™ - Industrial

C18 ACERT™

industrial

  • Compression Ratio: 16.3:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 145 mm (5.71 in)
Get a quote
Get a quote