C2.2 industria

  • Compression Ratio 23.3:1
  • Aspiration Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
  • Bore 84 mm (3.3 in)

OVERVIEW

The Cat C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

SPECIFICATIONS

  • Compression Ratio 23.3:1
  • Aspiration Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
  • Bore 84 mm (3.3 in)
  • Displacement 2.216 L (135 in³)
  • Stroke 100 mm (3.9 in)
  • Length 660-664 mm (26-26.14in)
  • Width 459-531 mm (18.1-21 in)
  • Height 725 mm (28.5 in)
  • Emissions U.S. EPA Tier 4 Interim Equivalent
  • Rotation From Flywheel End Counterclockwise
  • Rated Speed 2200-3000 rpm
  • Minimum Power 31 bkW41.6 BHP
  • Maximum Power 49.3 bkW66.1 BHP
  • Engine Configuration Inline 4, 4-Stroke-Cycle Diesel
  • Lube System Refill 10.6 L (11.2 qt)
  • Combustion System Indirect Injection
  • Weight Net Dry Basic Operating Engine Without Optional Attachments 184-194 kg (406-427.7 lb)
  • Industry industrial
  • Overview The Cat C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

EQUIPMENT

C2.2 Standard Equipment

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Tier 4 Final: Alternator 12V 85 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheels and Flywheel Housing
    • SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
    • Choice of SAE No. 4 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

RELATED PRODUCTS

3406C - Industrial

3406C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled
  • Bore: 137.2 mm (5.4 in)
Get a quote
3412C - Industrial

3412C

industrial

  • Compression Ratio: 14.5:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 137.2 mm (5.4 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3508 - Industrial

3508

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3512 - Industrial

3512

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
3516 - Industrial

3516

industrial

  • Compression Ratio: 13.0:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 170 mm (6.7 in)
Get a quote
C18 ACERT™ - Industrial

C18 ACERT™

industrial

  • Compression Ratio: 16.3:1
  • Aspiration: Turbocharged Aftercooled (TA)
  • Bore: 145 mm (5.71 in)
Get a quote