3512C oil and ga

  • Minimum Rating 1550 ekW1938 kV·A
  • Maximum Rating 1700 ekW2125 kV·A
  • Aspiration Turbocharged-Aftercooled

SPECIFICATIONS

  • Minimum Rating 1550 ekW1938 kV·A
  • Maximum Rating 1700 ekW2125 kV·A
  • Aspiration Turbocharged-Aftercooled
  • Fuel System EUI
  • Bore 170 mm6.7 in
  • Displacement 59 l3574 in³
  • Stroke 215 mm8.5 in
  • Length 5448 mm214.5 in
  • Width 1825 mm71.9 in
  • Height 2313 mm91 in
  • Emissions IMO Tier II
  • Oil Change Interval 1000 h1000 h
  • Lube Oil System Refill 318 l84 gal (US)
  • Cooling System Engine 157 l41.5 gal (US)
  • Weight 14975 kg33300 lb
  • Engine Control ADEM A3
  • Industry oil-and-gas

EQUIPMENT

3512C Standard Equipment

  • AIR INLET SYSTEM
    • Corrosion resistant separate circuit aftercooler core, regular dutyair cleaners, dual turbochargers
  • CONTROL SYSTEM
    • Caterpillar A-III electronic engine control, Electronic UnitInjection fuel system, rigid wiring harness
  • COOLING SYSTEM
    • Auxiliary fresh water pump, centrifugal non-self-priming auxiliarysea water pump, gear driven centrifugal jacket water pump,expansion tank, engine oil cooler, thermostats and housing
  • EXHAUST SYSTEM
    • Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields,vertical exhaust outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel, SAE No. 00, 183 teethFlywheel housing, SAE No. 00
  • FUEL SYSTEM
    • Fuel filter, RH, with service indicators
    • Fuel transfer pump
    • Electronically Controlled Unit Injectors
  • INSTRUMENTATION
    • Engine mounted instrument panel with four position switch, overspeed shutdown notification light, emergency stop notificationlight, graphical display unit for analog or digital display of: oil andfuel pressure, oil and fuel filter differential, system DC voltage,exhaust and water temperature, air inlet restriction, servicemeter, engine speed, fuel consumption (total and instantaneous)
  • LUBE SYSTEM
    • Top mounted crankcase breather, RH oil filter, RH oil filler,gear type oil pump, deep sump oil pan, recommended use ofCaterpillar Diesel Engine Oil 10W30 or 15W40
  • MOUNTING SYSTEM
    • Industrial type engine mounting rails)
  • POWER TAKE-OFFS
    • Accessory driveLower RH, Lower LHFront housing, Two-sided
  • PROTECTION SYSTEM
    • A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
    • Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection
  • GENERAL
    • Vibration damper and guardPaint, Caterpillar Yellow engine with black rails.Lifting eyes

3512C Optional Equipment

  • AIR INLET SYSTEM
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • CHARGING SYSTEM
    • Battery Chargers
    • Charging Alternators
  • CONTROL SYSTEM
    • Load Sharing module
    • Local speed throttle control
  • COOLING SYSTEM
    • Water level switch gauge
    • Coolant level sensors
    • Connections
    • Keel Cooling Conversions
    • Radiator cooling conversion
    • Heat exchangers
    • Auxiliary water pumps
    • Sea water pump removal
    • Air separator
  • EXHAUST SYSTEM
    • Exhaust outlet
    • Flexible fittings
    • Elbows
    • Flanges
    • Flange and exhaust expanders
    • Mufflers
  • FUEL SYSTEM
    • Fuel Cooler
    • Fuel priming pumps
    • Flexible fuel lines
    • Rigid Fuel Lines
    • Primary fuel filter
    • Fuel level switch
  • GENERATORS AND GENERATOR ATTACHMENTS
    • INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
    • INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
  • INSTRUMENTATION
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface Box
    • Thermocouples
    • Remote panel display
    • Remote cylinder temperature display
  • LUBE SYSTEM
    • Oil Pan
    • Oil pan accessories
    • Sump pumps
    • Prelubrication Options
    • Lubricating oil
    • Centrifugal Oil Filter
  • MOUNTING SYSTEM
    • Vibration isolators
    • Rails
  • POWER TAKE-OFFS
    • Flywheel guard
    • Flexible coupling
    • Coupling hub
    • Front housing accessories
    • Upper left hand front location
    • Upper left hand rear location
    • Upper right hand front location:
    • Upper right hand rear location
    • Lower left hand front location
    • Front housing accessory drives
    • Front power take-offs
    • Crankshaft pulleys
    • Damper guard removals
  • PROTECTION SYSTEM
    • Air inlet shutoffs
    • Switches and contactors
    • Explosion relief valve
    • Sensors
  • SPARE PART KITS
    • Engine Parts Kits
  • STARTING SYSTEM
    • Starting motors or barring divice
    • Air starting motors options
    • Starting aids
    • Battery sets - 24 volt - Dry
    • Battery rack
  • GENERAL
    • Tool set
    • Caterpillar datalink wire
  • SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
    • Commissioning

RELATED PRODUCTS

CN1566 Electric Motor - Oil-and-gas

CN1566 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 1189 r/min1189 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3086 Electric Motor for Gas Compression - Oil-and-gas

CN3086 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 892 r/min892 r/min
  • Mounting Designation: F1 or F2
Get a quote
CN3586 Electric Motor for Gas Compression - Oil-and-gas

CN3586 Electric Motor for Gas Compression

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 rpm
  • Mounting Designation: F1 or F2
Get a quote
CN5086 Electric Motor - Oil-and-gas

CN5086 Electric Motor

oil and gas

  • Electric Motor Type: Squirrel Cage Induction Motor
  • Full Load Speed: 894 r/min894 r/min
  • Mounting Designation: F1 or F2
Get a quote
3406C - Oil-and-gas

3406C

oil and gas

  • Minimum Rating: 217 bkW292 BHP
  • Maximum Rating: 359 bkW482 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3412 - Oil-and-gas

3412

oil and gas

  • Minimum Rating: 476 bkW638 BHP
  • Maximum Rating: 551 bkW739 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3508 - Oil-and-gas

3508

oil and gas

  • Minimum Rating: 709 bkW950 BHP
  • Maximum Rating: 795 bkW1065 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3512 - Oil-and-gas

3512

oil and gas

  • Minimum Rating: 1066 bkW1430 BHP
  • Maximum Rating: 1195 bkW1600 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote
3516 - Oil-and-gas

3516

oil and gas

  • Minimum Rating: 1417 bkW1900 BHP
  • Maximum Rating: 1480 bkW1985 BHP
  • Aspiration: Turbocharged Aftercooled
Get a quote