OVERVIEW
N
SPECIFICATIONS
- Engine Model Cat® C7.1 ACERT™ Technology
- Bore 105 mm4.13 in
- Stroke 135 mm5.31 in
- Displacement 7.01 l427.8 in³
- Cooling System 36.5 l9.64 gal (US)
- Engine Crankcase 18.5 l4.89 gal (US)
- Cab Fops Cab with FOPS (Falling Object Protective Structure) meets FOPS criteria ISO 10262:1998 and SAE J1356:2008
- Note *Not available in all markets. Available only for Africa, Middle East and Eurasia. Please contact your Cat dealer for details.
- Maximum Travel Speed 37 km/h23 mile/h
- Industry wheel-excavators
- Overview N
EQUIPMENT
M320D2 Standard Equipment
- ELECTRICAL
- Alternator, 75 ampere
- Lights: – Halogen working lights
- Cab mounted: two front, one rear
- Boom
- Halogen front lights
- LED rear lights
- Main shut-off switch
- Two Cat maintenance free heavy-duty batteries
- Signal/warning horn
- ENGINE
- Cat C7.1 ACERT meets China III Nonroad emission standards and meets Tier 3/Stage IIIA equivalent emission standards
- Automatic engine speed control, including one touch low idle
- Automatic starting aid
- Power mode selector (Eco and standard)
- Altitude capability: 3000 m
- Fuel/water separator with level indicator, fuel priming pump, water level switch and a visual restriction indicator
- HYDRAULICS
- Cat XT-6 ES hoses
- Adjustable hydraulic sensitivity
- Oil cooler
- Anti-drift valve for bucket cylinder
- Hydraulic mineral oil, Cat HYDO™ Advanced 10 oil
- Heavy lift mode
- Load-sensing hydraulic system
- Separate swing pump
- Stick regeneration circuit
- OPERATOR STATION
- Reinforced cab structure compliant with 2006/42/EC (tested according to ISO 12117-2:2008) (Not available in all markets. Available only for Africa, Middle East and Eurasia. Please contact your Cat dealer for details.)
- Washer bottle for wipers
- Interior lighting
- Joysticks, pilot operated
- Literature compartment behind the seat
- Mounting provisions for radio and speakers
- Adjustable armrests
- Air conditioner, heater and defroster with automatic climate control
- Ash tray with cigarette lighter (24 volt)
- Beverage cup/can holder
- Bolt-on guards capability
- Bottle holder
- Bottom mounted, intermittent, parallel wiping system that covers the upper and lower windshield glass
- Camera mounted on counterweight displays through cab monitor
- Coat hook
- Floor mat, washable, with storage compartment
- Instrument panel and gauges, with full color monitor display: – Information and warning messages in local language – Gauges for fuel level, engine coolant and hydraulic oil temperature – Filters/fluids change interval – Indicators for headlights, turning signal, low fuel, engine dial setting – Clock with 10-day backup battery
- Laminated front windshield
- Left side console, tiltable, with lock out for all controls
- Literature holder in right hand cab panel
- Mobile phone holder
- Parking brake
- Positive filtered ventilation, variable speed
- Power supply, 12V-7A
- Rear window, emergency exit
- Retractable seat belt, 51 mm
- Skylight
- Sliding door windows
- Steering column, tiltable
- Storage area suitable for a lunch box
- Sunshade for windshield and skylight
- Travel speed lock
- UNDERCARRIAGE
- Hydrostatic transmission, two speeds
- Creeper speed
- Full hydraulic steering with emergency capability
- Four wheel drive
- Two-piece drive shaft
- Heavy Duty axles, with advanced disc brake system and travel motor with adjustable breaking force
- Oscillating front axle, lockable, with remote greasing point
- Steps, wide, left and right
- Toolbox, left and right
- OTHER EQUIPMENT
- Automatic swing brake
- Counterweight, 4000 kg
- Mirrors, frame and cab
- Cat Product Link
- Capability to add other auxiliary hydraulic circuits
- Caterpillar Datalink and Electronic Technician capability
- Door locks and cab locks with Caterpillar one-key security system
- S∙O∙S quick sampling valves for engine oil, hydraulic oil and coolant
M320D2 Optional Equipment
- AUXILIARY CONTROLS AND LINES
- Auxiliary boom and stick lines
- Basic control circuits: – Medium pressure
- Two-way, medium pressure circuit, for rotating or tilting of work tools
- One/two-way high pressure for hammer application or opening and closing of a work tool
- Programmable flow and pressure for up to 10 work tools – selection via monitor
- Quick coupler control
- Pattern changer
- FRONT LINKAGE
- Booms: – One-piece boom, 5350 mm – VA boom (two piece), 5260 mm
- Bucket linkage with diverter valve (Standard for Africa, Middle East and Eurasia)
- Sticks: – 2500, 2800 mm
- HYDRAULICS
- Overload warning device (Standard for Africa, Middle East and Eurasia)
- Boom and stick lowering control devices (Standard for Africa, Middle East and Eurasia)
- ELECTRICAL
- Travel alarm with or without three selectable modes
- Refueling pump
- Lights: – Rotating beacon on cab
- OPERATOR STATION
- Front and top guards
- CD/MP3 Radio (12V) at rear location including speakers and 12V converter
- Windshield: – One piece – 70/30 split, openable, with visor for rain protection
- Seats: – Vertical mechanical suspension with manual weight adjustment and mechanical lumbar support – Vertical air suspension, horizontal suspension, automatic weight adjustment, mechanical lumbar support, passive climate system, seat cushion length and angle adjustment and a seat heater
- Auxiliary high pressure pedal
- UNDERCARRIAGE
- Undercarriages: – Blade front/outriggers rear – Outriggers front/blade rear – Outriggers front and rear (Not available in all markets. Please contact your Cat dealer for details.)
- Tires: – Pneumatic 10.00-20 dual – Solid rubber 10.00-20 dual (Not available in all markets. Please contact your Cat dealer for details.) – Spacer rings for tires – Fenders (Not available in all markets. Please contact your Cat dealer for details.)
- OTHER EQUIPMENT
- Cat Machine Security System (MSS)
- Uppercarriage access steps with integrated tool box
- Cab protecting guards, front and top
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
M315D2
wheel excavators
- Engine Model: Cat C4.4 ACERT
- Bore: 105 mm4.1 in
- Stroke: 127 mm5 in
M317D2
wheel excavators
- Engine Model: Cat C4.4 ACERT
- Bore: 105 mm4.1 in
- Stroke: 127 mm5 in
M320D2
wheel excavators
- Engine Model: Cat® C7.1 ACERT™ Technology
- Bore: 105 mm4.13 in
- Stroke: 135 mm5.31 in
M322D2
wheel excavators
- Engine Model: Cat® C7.1 ACERT™
- Bore: 105 mm4.13 in
- Stroke: 135 mm5.31 in